Page 1
Features
Glass Passivated Die Construction
Low Forward Voltage Drop and High Current Capability
Surge Overload Rating to 100A Peak
Ideally Suited for Automated Assembly
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Top View
Green
S3A/B - S3M/B
3.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER
Mechanical Data
Case: SMB/SMC
Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Lead Free Plating (Matte Tin Finish). Solderable per
MIL-STD-202, Method 208
Polarity: Cathode Band or Cathode Notch
Weight: SMB 0.093 grams (approximate)
SMC 0.21 grams (approximate)
Bottom View
Ordering Information* (Note 4)
Part Number Compliance Case Packaging
S3xB-13-F Standard SMB 3000/Tape & Reel
S3x-13-F Standard SMC 3000/Tape & Reel
*x = Device type, e.g. S3AB-13-F (SMB package); S3A-13-F (SMC Package).
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
S3A/B - S3M/B
Document number: DS16005 Rev. 18 - 2
YWW
S3x(B)
S3x = Product Type Marking Code, ex. S3K (SMC)
S3xB = Product Type Marking Code, ex. S3KB (SMB)
= Manufacturers’ code marking
YWW = Date code marking
Y = Last digit of year (ex: 14 for 2014)
WW = Week code (01 to 53)
1 of 4
www.diodes.com
March 2014
© Diodes Incorporated
Page 2
R
G
O
R
R
CUR
R
N
T
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
V
V
DC Blocking Voltage
RMS Reverse Voltage
V
R(RMS)
Average Rectified Output Current @ TT = +75°C IO
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I
Thermal Characteristics
Characteristic Symbol Value Unit
Typical Thermal Resistance Junction to Terminal (Note 5)
Operating and Storage Temperature Range
T
RRM
RWM
VR
FSM
R
θJT
J, TSTG
S3A/B - S3M/B
S3
A/AB
50 100 200 400 600 800 1000 V
30 70 140 280 420 560 700 V
S3
B/BB
S3
D/DB
S3
G/GB
S3
J/JB
S3
K/KB
3.0 A
100 A
10 °C/W
-65 to +150 °C
S3
M/MB
Unit
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Forward Voltage @ IF = 3.0A VFM
Peak Reverse Current @ TA = +25°C
at Rated DC Blocking Voltage @ T
= +125 °C
A
Typical Total Capacitance (Note 6)
Notes: 5. Thermal resistance: Junction to Terminal, unit mounted on PC board with 5.0 mm
6. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
I
RM
C
T
3.0
(A)
2.5
E
2.0
D
1.5
WA
E F
1.0
A
1.15 V
10
250
40 pF
2
(0.013 mm thick) copper pad as heat sink.
10
1.0
0.1
µA
0.5
AV
I, AVE
0
25 50 75 100 125 150
T , TERMINAL TEMPERATURE (ºC)
T
Fig. 1 Forward Current Derating Curve
F
I , INSTANTANEOUS FORWARD CURRENT (A)
0.01
I Pulse Width = 300 SF
0 0.4 0.8 1.2 1.6 2.0
V , INSTANTANEOUS FORWARD VOLTAGE (V)
F
Fig. 2 Typical Forward Characteristics
S3A/B - S3M/B
Document number: DS16005 Rev. 18 - 2
2 of 4
www.diodes.com
March 2014
© Diodes Incorporated
Page 3
P
FOR
R
URGE CUR
REN
T
1,000
100
10
1.0
0.1
0.01
0 20 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
(A)
D S
WA
EAK
FSM
I,
120
100
80
60
40
20
0
1
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Forward Surge Current Derating Curve
10
100
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A
J
H
B
SMB
C
Dim Min Max
A 3.30 3.94
B 4.06 4.57
C 1.96 2.21
D 0.15 0.31
D
E 5.00 5.59
G 0.05 0.20
H 0.76 1.52
J 2.00 2.50
G
E
All Dimensions in mm
S3A/B - S3M/B
T = 125°C
j
T= 25°C
j
Fig. 4 Typical Reverse Characteristi cs
SMC
Dim Min Max
A 5.59 6.22
B 6.60 7.11
C 2.75 3.18
D 0.15 0.31
E 7.75 8.13
G 0.10 0.20
H 0.76 1.52
J 2.00 2.50
All Dimensions in mm
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
X
Y
S3A/B - S3M/B
Document number: DS16005 Rev. 18 - 2
X
1
SMB
Dimensions
C 4.30
Value
(in mm)
Dimensions
G 1.80
G
X 2.50
X1 6.80
Y 2.30
C
3 of 4
www.diodes.com
SMC
Value
(in mm)
C 6.80
G
X
X1
Y
4.40
2.50
9.40
3.30
March 2014
© Diodes Incorporated
Page 4
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2014, Diodes Incorporated
www.diodes.com
S3A/B - S3M/B
S3A/B - S3M/B
Document number: DS16005 Rev. 18 - 2
4 of 4
www.diodes.com
March 2014
© Diodes Incorporated
Loading...