Page 1
g
A
Features
• Low Forward Voltage Drop
• Soft, Fast Switching Capability
• Schottly Barrier Chip
• ITO-220S Heat Sink Tab Electrically Isolated from Cathode
• UL Approval in Accordance with UL 1557, Reference No.
E94661
Top View Bottom View
MBR10150CTP
10A SCHOTTKY BARRIER RECTIFIER
Mechanical Data
• Case: ITO-220S
• Case Material: Molded Plastic, UL Flammability Classification
Rating 94V-0
• Terminals: Matte Tin Finish annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Weight: 1.335 grams (approximate)
4
Isolated
2
Common
1
Cathode
Anode
Package Pin Out
Confi
Anode
uration
3
Ordering Information (Note 1)
Part Number Case Packaging
MBR10150CTP ITO-220S 50 pieces/tube
Notes: 1. For packaging details, go to our website at http://www.diodes.com.
Marking Information
MBR
10150CTP
YYWW AB
MBR10150
Document number: DS31499 Rev. 9 - 2
MBR10150CTP = Product Type Marking Code
B = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last two digits of year (ex: 08 = 2008)
WW = Week (01 - 53)
1 of 4
www.diodes.com
April 2011
© Diodes Incorporated
Page 2
θ
TANT
O
US FOR
RD C
URR
T
Maximum Ratings (Per Leg) @T
= 25°C unless otherwise specified
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current
(Per Leg)
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Isolation Voltage
From Terminal Heatsink t = 1 min.
Thermal Characteristics (Per Leg)
Characteristic Symbol Value Unit
Typical Thermal Resistance Junction to Case
Operating and Storage Temperature Range
V
RRM
V
RWM
V
RM
I
(Total) 10
O
I
FSM
V
AC
R
JC
T
, T
J
STG
150 V
5
105 A
2000 V
3
-65 to +175
MBR10150CTP
A
°C/W
°C
Electrical Characteristics (Per Leg) @T
= 25°C unless otherwise specified
A
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage Drop
Leakage Current (Note 2)
Notes: 2. Short duration pulse test used to minimize self-heating effect.
100
(A)
EN
10
1
WA
0.1
0.01
T = 150°C
A
T = 125°C
A
T = 85°C
A
T = 25°C
A
ANE
0.001
V
F
I
R
- - 0.91
- - 0.75
- - 0.05
- - 20
V
mA
= 5A, TJ = 25ºC
I
F
I
= 5A, TJ = 125ºC
F
= 150V, TJ = 25ºC
V
R
V
= 150V, TJ = 125ºC
R
1,000
T = 150°C
A
100
T = 125°C
A
10
T = 85°C
A
1
T = 25°C
A
0.1
F
I, INS
0.0001
0 200 400 600 800 1,000 1,200
V , INSTANT ANEOUS FORWARD VOLTAGE (mV)
F
Fig. 1 Typical Forward Characteristics
R
I , INSTANTANEOUS REVERSE CURRENT (µA)
0.01
0306090120150
V , INSTANTANEOUS REVERSE VOLTAGE (V)
R
Fig. 2 Typical Reverse Characteristics
MBR10150
Document number: DS31499 Rev. 9 - 2
2 of 4
www.diodes.com
April 2011
© Diodes Incorporated
Page 3
MBR10150CTP
10
R = R
θθ
JA JC
Total Device
5
R = 21°C/W
θ
F(AV)
I , A VERAGE FORW ARD CURRENT (A)
JA
Per Element
0
25 50 75 100 125 150
T , AMBIENT TEMPERATURE (°C)
A
Fig. 3 Forward Current Derating Curve
Package Outline Dimensions
E
Q
+
D
Ø1.5
Dp 0.1 max
D1
L
e
5 Ref
°
7 Ref
°
ØP
1.7 Ref
5 Ref
°
b2
b
5 Ref
°
A
A1
+
H1
D2
5 Ref
°
L1
A2
E1
DIM. MIN. MAX. TYP.
A 4.52 4.62 4.57
A1 1.17 1.39
−
A2 2.57 2.77 2.67
b 0.72 0.95 0.84
b2 1.15 1.54 1.26
c 0.356 0.61
−
D 14.22 16.51 15.00
D1 8.60 8.80 8.70
D2 13.68 14.08
−
e 2.49 2.59 2.54
e1 4.98 5.18 5.08
E 10.01 10.21 10.11
ITO-220S
c
e1
E1 6.86 8.89
H1 5.85 6.85
−
−
L 13.30 13.90 13.60
L1
P 3.54 4.08
Q 2.54 3.42
4.00
−
−
−
−
All Dimensions in mm
MBR10150
Document number: DS31499 Rev. 9 - 2
3 of 4
www.diodes.com
April 2011
© Diodes Incorporated
Page 4
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorize d application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
MBR10150CTP
MBR10150
Document number: DS31499 Rev. 9 - 2
4 of 4
www.diodes.com
April 2011
© Diodes Incorporated
Loading...