Diodes FMMT723 User Manual
A
f
Features
• BV
• I
• I
• Low Saturation Voltage V
• R
• 625mW power dissipation
• h
• Complementary NPN Type: FMMT624
• Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
> -100V
CEO
= -1A Continuous Collector Current
C
= -2.5A Peak Pulse Current
CM
= 210mΩ for a low equivalent on-resistance
CE(SAT)
characterised up to -1.5A for high current gain hold-up
FE
SOT23
Top View Device Symbol
< -330mV @ -1A
CE(sat)
Product Line o
Diodes Incorporated
FMMT723
100V PNP SILICON LOW SATURATION TRANSISTOR IN SOT23
Mechanical Data
• Case: SOT23
• Case Material: molded plastic, “Green” molding compound
• UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208
• Weight 0.008 grams (approximate)
Applications
• High-side driver
• Load disconnect switch
• Motor drive
C
E
C
B
B
E
Top View
Pin-Out
Ordering Information (Note 4)
Product Marking Reel size (inches) Tape width (mm) Quantity per reel
FMMT723TA 723 7 8 3,000
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,"Green" and Lead-Free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
4. For packaging details, go to our website at http://www.diodes.com
<1000ppm antimony compounds.
Marking Information
FMMT723
Document Number: DS33240 Rev. 4 - 2
723
www.diodes.com
723 = Product Type Marking Code
1 of 7
January 2013
© Diodes Incorporated
A
f
Product Line o
Diodes Incorporated
FMMT723
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Continuous Collector Current
Peak Pulse Current
Base Current
Thermal Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Power Dissipation (Note 5)
Power Dissipation (Note 6)
Thermal Resistance, Junction to Ambient (Note 5)
Thermal Resistance, Junction to Ambient (Note 6)
Thermal Resistance, Junction to Leads (Note 7)
Operating and Storage Temperature Range
ESD Ratings (Note 8)
V
CBO
V
CEO
V
EBO
I
I
CM
I
P
P
R
R
R
T
J, TSTG
C
B
θJA
θJA
θJL
D
D
-100 V
-100 V
-7 V
-1 A
-2.5 A
-500 mA
625 mW
806 mW
200
155
194
-55 to +150
°C/W
°C/W
°C/W
°C
Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A
Characteristic Symbol Value Unit JEDEC Class
Electrostatic Discharge - Machine Model ESD MM ≥ 400 V C
Notes: 5. For a device surface mounted on 25mm X 25mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured
when operating in a steady-state condition.
6. Same as note 5, except the device is measured at t ≤ 5 sec.
7. Thermal resistance from junction to solder-point (at the end of the collector lead).
8. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
FMMT723
Document Number: DS33240 Rev. 4 - 2
2 of 7
www.diodes.com
January 2013
© Diodes Incorporated
A
f
Thermal Characteristics and Derating information
220
T
200
amb
=25°C
180
160
140
120
D=0.5
100
80
60
40
20
D=0.2
0
Single Pulse
D=0.1
D=0.05
100µ 1m 10m 100m 1 10 100 1k
Thermal Resistance (°C/W)
Pulse Width (s)
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Max Power Dissipation (W)
Product Line o
Diodes Incorporated
FMMT723
0 25 50 75 100 125 150 175
Temperature (°C)
Transient Thermal Impedance
Derating Curve
100
Single Pulse
T
=25°C
amb
10
1
Maximum Power (W)
0.1
100µ 1m 10m 100m 1 10 100 1k
Pulse Width (s)
Pulse Power Dissipation
FMMT723
Document Number: DS33240 Rev. 4 - 2
3 of 7
www.diodes.com
January 2013
© Diodes Incorporated
Loading...