Diodes FMMT593 User Manual
A
f
Product Line o
Diodes Incorporated
Features
• BV
• I
• I
• Low Saturation Voltage
• Excellent h
• Complementary NPN Type: FMMT493
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
• PPAP capable (Note 4)
> -100V
CEO
= -1A high Continuous Collector Current
C
= -2A Peak Pulse Current
CM
Characteristics up to I
FE
= -1A
C
SOT23
Top View Device Symbol
FMMT593
100V PNP HIGH VOLTAGE TRANSISTOR IN SOT23
Mechanical Data
• Case: SOT23
• Case Material: molded plastic, “Green” molding compound
• UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208
• Weight 0.008 grams (approximate)
Applications
• High-side driver
• Load disconnect switch
• Motor drive
C
E
C
B
B
E
Top View
Pin-Out
Ordering Information (Notes 4 & 5)
Part Number Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel
FMMT593TA AEC-Q101 593 7 8 3,000
FMMT593QTA Automotive 593 7 8 3,000
FMMT593TC AEC-Q101 593 13 8 10,000
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,"Green" and Lead-Free.
<1000ppm antimony compounds.
the same, except where specified.
5. For packaging details, go to our website at http://www.diodes.com
Marking Information
FMMT593
Document number: DS33106 Rev. 5 - 2
593
www.diodes.com
593 = Product Type Marking Code
1 of 7
January 2013
© Diodes Incorporated
A
f
Product Line o
Diodes Incorporated
Maximum Ratings (@T
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Continuous Collector Current
Peak Pulse Current
Continuous Base Current
Thermal Characteristics (@T
Power Dissipation (Note 6)
Thermal Resistance, Junction to Ambient (Note 6)
Thermal Resistance, Junction to Lead (Note 7)
Operating and Storage Temperature Range
Notes: 6. For a device surface mounted on 15mm X 15mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured
when operating in a steady-state condition.
7. Thermal resistance from junction to solder-point (at the end of the collector lead).
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
V
CBO
V
CEO
V
EBO
I
C
I
CM
I
B
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
P
D
R
θJA
R
θJL
T
J, TSTG
-120 V
-100 V
-7 V
-1 A
-2 A
-200 mA
500 mW
250
197
-55 to +150
FMMT593
°C/W
°C/W
°C
FMMT593
Document number: DS33106 Rev. 5 - 2
2 of 7
www.diodes.com
January 2013
© Diodes Incorporated
A
f
Product Line o
Diodes Incorporated
Thermal Characteristics and Derating Information
1
V
CE(sat)
Limit
100m
DC
1s
10m
Collector Current (A)
C
-I
15 x 15mm FR4
1oz Copper
1m
110100
100ms
10ms
1ms
100µs
-VCE Collector-Emitter Voltage (V)
Safe Operating Area
FMMT593
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0 20 40 60 80 100 120 140 160
Max Power Dissipation (W)
15 x 15mm FR4 1oz Copper
Temperature (°C)
Derating Curve
240
15 x 15mm FR4 1oz Copper
200
160
D=0.5
120
80
D=0.2
40
0
100µ 1m 10m 100m 1 10 100 1k
Thermal Resistance (°C/W)
D=0.1
Pulse Width (s)
Single Pulse
D=0.05
Transient Thermal Impedance
100
10
1
0.1
100µ 1m 10m 100m 1 10 100 1k
Max Power Dissipation (W)
Pulse Power Dissipation
15 x 15mm FR4 1oz Copper
Pulse Width (s)
FMMT593
Document number: DS33106 Rev. 5 - 2
3 of 7
www.diodes.com
January 2013
© Diodes Incorporated
Loading...