Features
• Glass Passivated Die Construction
• Super-Fast Recovery Time For High Efficiency
• Surge Overload Rating to 30A Peak
• Ideally Suited for Automated Assembly
• Lead Free Finish/RoHS Compliant (Note 1)
• Green Molding Compound (No Halogen and Antimony)
(Note 2)
Top View Bottom View
Green
ES1A - ES1G
1.0A SURFACE MOUNT SUPER-FAST RECTIFIER
Mechanical Data
• Case: SMA
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Lead Free Plating (Matte Tin Finish) Solderable per
MIL-STD-202, Method 208
• Polarity: Cathode Band or Cathode Notch
• Weight: 0.064 grams (approximate)
Ordering Information (Note 3)
Part Number Case Packaging
ES1x-13-F SMA 5000/Tape & Reel
* x = Device type, e.g. ES1A-13-F
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
3. For packaging details, go to our website at http://www.diodes.com.
2. Product manufactured with Data Code 0924 (week 24, 2009) and newer are built with Green Molding Compound.
Marking Information
ES1A - ES1G
Document number: DS14001 Rev. 16 - 2
YWW
ES1x
ES1x = Product type marking code, ex. ES1A
= Manufacturer’s code marking
YWW = Date code marking
Y = Last digit of year (ex: 2 for 2002)
WW = Week code (01 to 53)
1 of 4
www.diodes.com
November 2011
© Diodes Incorporated
)
θ
r
R
G
REC
T
F
C
U
R
R
T
N
TAN
TAN
O
US F
O
R
RD CUR
REN
T
Maximum Ratings @T
= 25°C unless otherwise specified
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol ES1A ES1B ES1C ES1D ES1G Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
V
V
DC Blocking Voltage (Note 5)
RMS Reverse Voltage
V
R(RMS
Average Rectified Output Current @ TT = 110°CIO
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I
Thermal Characteristics
Characteristic Symbol Value Unit
Typical Thermal Resistance, Junction to Terminal (Note 4)
Operating and Storage Temperature Range
RRM
RWM
V
R
FSM
T
R
JT
J, TSTG
ES1A - ES1G
50 100 150 200 400 V
35 70 105 140 280 V
1.0 A
30 A
25
-55 to +150
°C/W
°C
Electrical Characteristics @T
= 25°C unless otherwise specified
A
Characteristic Symbol ES1A ES1B ES1C ES1D ES1G Unit
= 0.6A
I
Maximum Forward Voltage Drop
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
Maximum Reverse Recovery Time (Note 6)
Typical Total Capacitance (Note 7)
Notes: 4. Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pad as heat sink.
5. Short duration pulse test used to minimize self-heating effect.
6. Measured with I
7. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
= 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
F
F
I
= 1.0A
F
T
= 25°C
A
= 125°C
T
A
V
FM
I
RM
t
r
C
T
1.5
Note 5
(A)
EN
1.0
IED
I
0.5
E
A
(A)
WA
E
10
1.0
0.1
0.90
0.92
5.0
200
⎯
1.25
V
μA
25 ns
20 pF
O
I, AVE
0
25 50 75 100 125 150 175
T , TERMINAL TEMPERATURE ( C)
T
°
Fig. 1 Forward Current Derating Curve
S
F
I, I
0.01
0 0.4 0.8 1.2 1.6
V , INSTANTANE OUS FO RWARD V OLT AGE (V )
F
Fig. 2 Typical Forward Characteristics
ES1A - ES1G
Document number: DS14001 Rev. 16 - 2
2 of 4
www.diodes.com
November 2011
© Diodes Incorporated
P
FORWAR
URGE CUR
RENT
TANT
O
U
R
R
CUR
RENT
ES1A - ES1G
30
(A)
Single Half-Sine-Wave
1,000
(µA)
100
20
D S
SE
10
EVE
S
T = 100 C
J
°
10
ANE
1.0
T = 25C
°
EAK
FSM
I,
0
110100
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Surge Current Derating Curve
R
0.1
I, INS
04080120
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics
J
1401006020
Package Outline Dimensions
A
J
H
ES1A - ES1G
Document number: DS14001 Rev. 16 - 2
B
SMA
Dim Min Max
C
A 2.29 2.92
B 4.00 4.60
C 1.27 1.63
D 0.15 0.31
E 4.80 5.59
D
G 0.05 0.20
H 0.76 1.52
J 2.01 2.30
All Dimensions in mm
G
E
3 of 4
www.diodes.com
November 2011
© Diodes Incorporated
ES1A - ES1G
Suggested Pad Layout
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document o r products described herein in such applica tions shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorize d application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
X
Y
C
Dimensions Value (in mm)
Z 6.5
G 1.5
X 1.7
Y 2.5
G
Z
IMPORTANT NOTICE
LIFE SUPPORT
C 4.0
ES1A - ES1G
Document number: DS14001 Rev. 16 - 2
4 of 4
www.diodes.com
November 2011
© Diodes Incorporated
Loading...