Diodes DXTN07100BP5 User Manual
A
f
Features
• BV
• I
• I
• P
• 43% smaller than SOT223; 60% smaller than TO252
• Maximum height just 1.1mm
• Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
ADVANCE INFORMATION
> 100V
CEO
= 2A High Continuous Collector Current
C
= 6A Peak Collector Current
CM
up to 3.2W
D
Top View Bottom View
Ordering Information (Note 4)
Product Line o
Diodes Incorporated
DXTN07100BP5
100V NPN MEDIUM POWER LOW SATURATION TRANSISTOR
PowerDI
Mechanical Data
• Case: PowerDI5
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208
• Weight: 0.093 grams (approximate)
Applications
• Voltage Regulator using Emitter-Follower
• DC-DC Converter
• Telecoms
• Power Management
C
B
E
Device Schematic
Top View
Pin-Out
®
5
Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel
DXTN07100BP5-13 AEC-Q101 DTN7100B 13 16 5,000
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html
Marking Information
PowerDI is a registered trademark of Diodes Incorporated.
DTN7100B
YYWWK
DXTN07100BP5
Document number: DS32023 Rev. 3 - 2
DTN7100B = Product Type Marking Code
= Manufacturers’ Code Marking
K = Factory Designator
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 09 for 2009)
WW = Week code (01 to 53)
1 of 7
www.diodes.com
May 2014
© Diodes Incorporated
A
f
Absolute Maximum Ratings (@T
Characteristic Symbol Value Unit
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Continuous Collector Current
Peak Pulse Current
Thermal Characteristics (@T
Characteristic Symbol Value Unit
Power Dissipation
Thermal Resistance, Junction to Ambient Air
Thermal Resistance, Junction to Leads (Note 8)
Operating and Storage Temperature Range
ADVANCE INFORMATION
A
ESD Ratings (Note 9)
= +25°C, unless otherwise specified.)
A
V
CBO
V
CEO
V
EBO
I
C
I
CM
= +25°C, unless otherwise specified.)
(Note 5)
(Note 6) 1.7
(Note 7) 0.74
(Note 5)
(Note 6) 75
(Note 7) 169
P
D
R
θJA
R
θJL
T
, T
J
STG
Product Line o
Diodes Incorporated
DXTN07100BP5
120 V
100 V
7 V
2 A
6 A
3.2
39
9
-55 to +150
W
°C/W
°C
Characteristic Symbol Value Unit JEDEC Class
Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A
Electrostatic Discharge - Machine Model ESD MM 400 V C
Notes: 5. For a device mounted with the exposed collector pad on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured
7. Same as note (5), except mounted on minimum recommended pad (MRP) layout.
under still air conditions whilst operating in a steady-state.
6. Same as note (5), except mounted on 25mm x 25mm 1oz copper.
8. Thermal resistance from junction to solder-point (on the exposed collector pad).
9. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
PowerDI is a registered trademark of Diodes Incorporated.
DXTN07100BP5
Document number: DS32023 Rev. 3 - 2
2 of 7
www.diodes.com
May 2014
© Diodes Incorporated
A
f
Thermal Characteristics and Derating Information
10
V
CE(sat)
Limited
1
DC
1s
100m
Single Pulse. TA=25°C
Collector Current (A)
I
50mm x 50mm 2oz FR4
C
10m
100m 1 10 100
100ms
10ms
1ms
100µs
VCE Collector-Emitter Voltage (V)
Safe Operating Area
40
50mm x 50mm
ADVANCE INFORMATION
Thermal Resistance (°C/W)
2oz FR4
30
D=0.5
20
D=0.2
10
0
100µ 1m 10m 100m 1 10 100 1k
Single Pulse
D=0.05
D=0.1
Pulse Width (s)
Product Line o
Diodes Incorporated
DXTN07100BP5
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Max Power Dissipation (W)
0 25 50 75 100 125 150 175
50mm x 50mm
2oz FR4
25mm x 25mm
1oz FR4
MRP
1oz FR4
Temperature (°C)
Derating Curve
100
10
1
100µ 1m 10m 100m 1 10 100 1k
Max Power Dissipation (W)
Pulse Width (s)
Single Pulse. T
50mm x 50mm 2oz FR4
amb
=25°C
Transient Thermal Impedance
180
160
140
120
100
80
60
2 oz. weight Copper
40
20
10 100 1000 10000
Thermal Resistance (°C/W)
1 oz. weight Copper
Copper Area (sq mm)
TA= 25°C
Power Rating (W)
Pulse Power Dissipation
4
TA= 25°C
3
2 oz. weight Copper
2
1
0
10 100 1000 10000
Copper Area (sq mm)
1 oz. weight Copper
Power Rating vs. Cu AreaThermal Resistance vs. Cu Area
PowerDI is a registered trademark of Diodes Incorporated.
DXTN07100BP5
Document number: DS32023 Rev. 3 - 2
3 of 7
www.diodes.com
May 2014
© Diodes Incorporated
Loading...