f
Features
• 43% smaller than SOT223; 60% smaller than TO252
• Maximum height just 1.1mm
• Rated up to 3.2W
• BV
• Maximum continuous current I
• Low Saturation voltage
• Totally Lead-Free & Fully RoHS compliant (Note 1)
• Halogen and Antimony Free. “Green” Device (Note 2)
CEO
> 100V
= 6A
C
Applications
• Motor Drive
• Regulator circuit
ADVANCE INFORMATION
Top View
POWERDI5
Bottom View
A Product Line o
Diodes Incorporated
DXT2011P5
100V NPN LOW SAT MEDIUM POWER TRANSISTOR
POWERDI
Mechanical Data
• Case: POWERDI5
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Weight: 0.093 grams (approximate)
Pin-out diagram Device Schematic
®
5
Ordering Information (Note 3)
Part Number Case Packaging
DXT2011P5-13 POWERDI5 5000/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
3. For packaging details, go to our website at http://www.diodes.com.
2. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
Marking Information
DXT2011
YYWWK
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 3 - 2
DXT2011 = Product Type Marking Code
= Manufacturers’ Code Marking
K = Factory Designator
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 09 for 2009)
WW = Week code (01 to 53)
1 of 7
www.diodes.com
April 2012
© Diodes Incorporated
f
θ
A Product Line o
Diodes Incorporated
DXT2011P5
Maximum Ratings @T
= 25°C unless otherwise specified
A
Characteristic Symbol Value Unit
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Continuous Collector Current
Peak Pulse Current
V
CBO
V
CEO
V
EBO
I
C
I
CM
200 V
100 V
7 V
6 A
10 A
Thermal Characteristics @T
= 25°C unless otherwise specified
A
Characteristic Symbol Value Unit
Power Dissipation
(Note 4)
(Note 5) 1.7
P
D
3.2
W
(Note 6) 0.74
Thermal Resistance, Junction to Ambient
ADVANCE INFORMATION
Thermal Resistance, Junction to Collector Terminal
Operating and Storage Temperature Range
Notes: 4. Device mounted on FR-4 PCB, single sided 2 o z. coppe r, collector pad dimensions 50mm x 50mm.
5. Device mounted on FR-4 PCB, single sided 1 oz. copper, collector pad dimensions 25mm x 25mm.
6. Device mounted on FR-4 PCB, single sided 1 oz. copper, minimum recommended pad layout.
(Note 5) 75
(Note 6) 169
R
JA
θ
R
JT
T
, T
J
STG
(Note 4)
39
°C/W
5.6 °C/W
-55 to +150 °C
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 3 - 2
2 of 7
www.diodes.com
April 2012
© Diodes Incorporated
f
Thermal Characteristics
A Product Line o
Diodes Incorporated
DXT2011P5
V
CE(sat)
Limited
10
1
DC
1s
100ms
amb
10ms
=25°C
1ms
100µs
100m
Collector Current (A )
I
Single Pulse. T
50mmX50mm FR4 2oz Cu
C
10m
100m 1 10 100
VCE Collector-Emitter Voltage (V)
Safe Operating Area
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0 25 50 75 100 125 150 175
Max Power Dissipation (W)
Temperature (°C)
50mmX50mm FR4
2oz Cu
25mmX25mm FR4
1oz Cu
Minimum p ad
1oz Cu
Derating Curve
ADVANCE INFORMATION
40
50mmX50mm FR4 2oz Cu
30
D=0.5
20
D=0.2
10
0
100µ 1m 10m 100m 1 10 100 1k
Thermal Resistance (°C/W)
Pulse Width (s)
Single Pulse
D=0.05
D=0.1
Single Pulse. T
100
10
1
100µ 1m 10m 100m 1 10 100 1k
Max Power Dissipation (W)
50mmX50mm FR4 2oz Cu
Pulse Width (s)
amb
=25°C
Transient Thermal Impedance
180
160
140
120
100
80
60
2 oz. weight Copper
40
20
10 100 1000 10000
Thermal Resistance (° C/W)
Copper Area (sq mm)
1 oz. weight Copper
T
=25°C
(amb)
Power Rating (W)
Thermal Resistance vs. Cu Area
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 3 - 2
3 of 7
www.diodes.com
Pulse Power Dissipation
4
T
=25°C
(amb)
3
2 oz. weight Copper
2
1
0
10 100 1000 10000
1 oz. weight Copper
Copper Area (sq mm)
Power Rating vs. Cu Area
© Diodes Incorporated
April 2012
f
)
)
A Product Line o
Diodes Incorporated
DXT2011P5
Electrical Characteristics @T
= 25°C unless otherwise specified
A
Characteristic Symbol Min Typ Max Unit Test Condition
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage (Note 7)
Emitter-Base Breakdown Voltage
Collector Cutoff Current
Collector Cutoff Current
Emitter Cutoff Current
Collector-Emitter Saturation Voltage (Note 7)
Base-Emitter Saturation Voltage (Note 7)
Base-Emitter Turn-On Voltage (Note 7)
DC Current Gain (Note 7)
ADVANCE INFORMATION
Transition Frequency
Output Capacitance
Switching Times
Notes: 7. Pulse Test: Pulse width ≤300μs. Duty cycle ≤2.0%.
BV
CBO
BV
CEO
BV
EBO
I
CBO
I
CER
R≤1kΩ
I
EBO
V
CE(sat)
V
BE(sat
V
BE(on
h
FE
f
−
T
C
obo
t
on
t
off
200 235
100 115
7 8.1
−
−
−
−
− −
−
−
−
−
−
−
100
100
30
10
−
⎯
⎯
−
−
−
−
−
−
−
20
0.5
20
0.5
10 nA
21
50
95
180
35
65
125
220
1020 1120 mV
920 1000 mV
−
−
−
−
130
26
41
1010
−
300
−
−
−
−
⎯
⎯
V
IC = 100μA
V
IC = 10mA
V
IE = 100μA
nA
μA
nA
μA
= 150V
V
CB
V
= 150V, T
CB
= 150V
V
CB
= 150V, T
V
CB
VEB = 6V
I
= 0.1A, IB =-5mA
C
I
= 1A, IB = 100mA
C
mV
= 2A, IB = 100mA
I
C
I
= 5A, IB = 500mA
C
IC = 5A, IB = 500mA
VCE = 2V, IC = 5A
= 2V, IC = 10mA
V
CE
V
= 2V, IC = 2A
CE
−
VCE = 2V, IC = 5A
V
= 2V, IC = 10A
CE
V
= 10V, IC = 100mA,
MHz
CE
f = 50MHz
pF
VCB = 10V, f = 1MHz
= 10V, IC = 1A,
V
CC
ns
I
= IB2 = 100mA
B1
= 100 °C
amb
= 100 °C
amb
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 3 - 2
4 of 7
www.diodes.com
April 2012
© Diodes Incorporated
f
Typical Characteristic
A Product Line o
Diodes Incorporated
DXT2011P5
1
Tamb=25°C
IC/IB=50
(V)
100m
CE(SAT)
V
10m
1m 10m 100m 1 10
IC/IB=20
IC Collector Current (A)
V
CE(S AT)
v I
C
IC/IB=10
0.6
IC/IB=10
0.5
0.4
(V)
0.3
0.2
CE(SAT)
V
0.1
0.0
1m 10m 100m 1 10
100°C
25°C
IC Coll ecto r Cu rren t (A)
V
CE(S AT)
v I
C
-55°C
ADVANCE INFORMATION
1.2
1.0
0.8
0.6
0.4
0.2
Normalised Gain
0.0
1m 10m 100m 1 10
100°C
25°C
-55°C
IC Coll ecto r Cu rren t (A)
hFE v I
C
VCE=2V
250
200
150
100
50
0
)
FE
Typical Gain (h
1.4
IC/IB=10
1.2
1.0
(V)
-55°C
0.8
BE(SAT)
25°C
V
0.6
100°C
0.4
1m 10m 100m 1 10
IC Coll ecto r Cu rren t (A)
V
BE(SAT)
v I
C
1.4
VCE=2V
1.2
1.0
(V)
-55°C
0.8
BE(ON)
25°C
V
0.6
100°C
0.4
1m 10m 100m 1 10
IC Collector Current (A)
V
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 3 - 2
BE(ON)
v I
C
5 of 7
www.diodes.com
April 2012
© Diodes Incorporated
f
Package Outline Dimensions
ADVANCE INFORMATION
D
b2
e
b1
b1
A Product Line o
Diodes Incorporated
DXT2011P5
A
A2
E
E1
W
A2
D2
L
E2
L1
POWERDI5
Dim Min Max
A 1.05 1.15
A2 0.33 0.43
b1 0.80 0.99
b2 1.70 1.88
D 3.90 4.05
D2 3.054 Typ
E 6.40 6.60
e 1.84 Typ
E1 5.30 5.45
E2 3.549 Typ
L 0.75 0.95
L1 0.50 0.65
W 1.10 1.41
All Dimensions in mm
Suggested Pad Layout
Y1
(2x)
Y
X1
(2x)
X
Dimensions Value (in mm)
C 1.840
G 0.852
X 3.360
X1 1.390
Y 4.860
Y1 1.400
G
C
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 3 - 2
6 of 7
www.diodes.com
April 2012
© Diodes Incorporated
f
A Product Line o
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document o r products described herein in such applica tions shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorize d application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
ADVANCE INFORMATION
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
IMPORTANT NOTICE
LIFE SUPPORT
Diodes Incorporated
DXT2011P5
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 3 - 2
7 of 7
www.diodes.com
April 2012
© Diodes Incorporated
Loading...