Features
• Glass Passivated Bridge Rectifier
• Excellent High Temperature Stability
• 150ºC Operating Junction Temperature
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
NEW PRODUCT
Top View
Green
T-MiniDIP
DSRHD02–DSRHD08
1.0A DSR BRIDGE
DIODESTAR RECTIFIER
Mechanical Data
• Case: T-MiniDIP
• Case Material: Molded Plastic “Green” Molding Compound,
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin over Copper Lead Frame,
Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Weight: 0.092 grams (approximate)
Bottom View
Ordering Information (Note 4)
Part Number Case Packaging
DSRHD02-13 T-MiniDIP 5000/Tape & Reel
DSRHD04-13 T-MiniDIP 5000/Tape & Reel
DSRHD06-13 T-MiniDIP 5000/Tape & Reel
DSRHD08-13 T-MiniDIP 5000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
DSRHD02-DSRHD08
Document number: DS35952 Rev. 4 - 2
_
+
YWW
Dxx
~~
www.diodes.com
xx = Product Type Marking Code
D
12 = 200V
14 = 400V
16 = 600V
18 = 800V
= Manufacturers’ Code Marking
YWW = Date Code Marking
Y = Last Digit of Year (ex: 2 = 2012)
WW = Week Code (01 ~ 53)
1 of 4
November 2012
© Diodes Incorporated
θ
P
P
OWER
PAT
O
N
DSRHD02–DSRHD08
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol DSRHD02 DSRHD04 DSRHD06 DSRHD08 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load (Per Diode)
V
V
RRM
RWM
V
I
FSM
200 400 600 800 V
RM
I
O
1.0 A
30 A
Minimum Fusing Current Rating (t < 8.3 ms) I2t 3.73 A2s
Thermal Characteristics
NEW PRODUCT
Characteristic Symbol Value Unit
Typical Thermal Resistance Junction to Lead
Typical Thermal Resistance Junction to Ambient
Operating and Storage Temperature Range
R
On Aluminum Substrate
On Glass-Epoxy Substrate 80
JL
R
JA
θ
T
, T
J
STG
25 °C/W
62.5
-55 to +150 °C
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Max Unit Test Condition
Forward Voltage (Per Diode)
V
Reverse Current (Note 5) (Per Diode) VR = Rated Block Voltage IR
Notes: 5. Short duration pulse test used to minimize self-heating effect.
F
0.95
1.1
10
150
V
μA
I
= 0.4A, TJ = +25°C
F
I
= 1.0A, TJ = +25°C
F
= Rated Block Voltage,
V
R
= 25°C
T
J
T
= 125°C
J
1.2
°C/W
1.0
(W)
0.8
I
1
T = 150°C
A
T = 125°C
A
0.6
DISSI
0.4
,
D
0.2
0
0 0.2 0.4 0.6 0.8 1.0 1.2
I , AVERAGE FORWARD CURRENT (A)
F(AV)
Fig. 1 Forward Power Dissipation
0.1
T = 100°C
A
T = 75°C
A
T = 25°C
A
F
I , INSTANTANEOUS FORWARD CURRENT (A)
0.01
0.3 0.5 0.7 0.9 1.1
V , INSTANTANEOUS FORWARD VOLTAGE (V)
F
Fig. 2 Typical Forward Characteristics
DSRHD02-DSRHD08
Document number: DS35952 Rev. 4 - 2
2 of 4
www.diodes.com
November 2012
© Diodes Incorporated
NEW PRODUCT
TANT
O
US R
R
C
U
R
R
T
RAG
O
RWARD CUR
RENT
P
FORWAR
URGE CUR
RENT
100
30
(µA)
EN
10
T = 150°C
A
T = 125°C
A
20
SE
1
EVE
T = 75°C
A
10
ANE
0.1
R
I, INS
0.01
20 40 60 80 100
PERCENTAGE RATED PEAK REVERSE VOLTAGE (%)
Fig. 3 Typical Reverse Characteristics
1.2
(A)
1.0
T , Lead Temperature
L
T = 25°C
A
T
C , TOTAL CAPACITANCE (pF)
0
01
V , DC REVERSE VOLTAGE (V)
R
Fig. 4 Total Capacitance vs. Reverse Voltage
50
(A)
40
DSRHD02–DSRHD08
f = 1MHz
10
100
0.8
0.6
E F
0.4
0.2
F(AV)
I, AVE
0
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
T , Ambient Temperature
A
0 25 50 75 100 125 150
TEMPERATURE (°C)
Fig. 5 Forward Current Derating Curve
b
E E1
L1
D1
e
c
D
A
30
D S
20
10
EAK
Non-repetitive
Sine wave,
T = 25°C Before
J
FSM
I,
Surge current is applied
0
110100
NUMBER OF CYCLES AT 60Hz
Fig. 6 Max Non-Repetitive Surge Current
T-MiniDIP
Dim Min Max
A 1.15 1.27
b 0.60 0.70
L
c 0.15 0.25
D 4.90 5.10
D1 3.20 3.50
E 5.30 5.50
E1 6.00 6.40
e 3.90 4.10
L 0.25 0.80
L1 0.25 0.55
All Dimensions in mm
DSRHD02-DSRHD08
Document number: DS35952 Rev. 4 - 2
3 of 4
www.diodes.com
November 2012
© Diodes Incorporated
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
NEW PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
DSRHD02-DSRHD08
Document number: DS35952 Rev. 4 - 2
DSRHD02–DSRHD08
X
Dimensions
C1
Y
C
IMPORTANT NOTICE
LIFE SUPPORT
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
4 of 4
www.diodes.com
C 4.00
C1 5.60
X 0.75
Y 0.85
Value
(in mm)
November 2012
© Diodes Incorporated
Loading...