Page 1
p
θ
Please click here to visit our online spice models database.
Features
• 300 Watts Peak Pulse Power (tp = 8x20ms)
• Transient Protection for data, signal, and VCC bus to IEC61000-
4-2 level 4 (ESD) and IEC 61000-4-4 (EFT)
• Low Capacitance, typ. <2 pF
• Low Leakage Current
• Unidirectional Configuration
• Surface Mount Package Ideally Suited for Automated Insertion
• Lead, Halogen and Antimony Free, RoHS Compliant "Green"
Device (Notes 4 and 5)
Top View
DLP05LC
LOW CAPACITANCE UNIDIRECTIONAL TVS
Mechanical Data
• Case: SOT-23
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminal Connections: See Diagram
• Terminals: Matte Tin Finish annealed over Alloy 42 leadframe
(Lead Free Plating). Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 2
• Ordering Information: See Page 2
• Weight: 0.008 grams (approximate)
LINE TO
BE PROTECTED
TVS
G
Device Schematic
NC
Maximum Ratings @T
= 25°C unless otherwise specified
A
Characteristic Symbol Value Unit
Peak Pulse Power (tp = 8x20μs)
Thermal Characteristics
Characteristic Symbol Value Unit
Thermal Resistance, Junction to Ambient
Operating and Storage Temperature Range
Electrical Characteristics @T
Reverse
Standoff
Voltage
V
RWM
Notes: 1. VR = 0V, f = 1MHz.
prior to Date Code V9 are built with Non-Green Molding Compound and may contain Halogens or Sb
DLP05LC
Document number: DS30283 Rev. 11 - 2
Breakdown Voltage
VBR @ IT
Min (V)
(V)
5 6.0
2 . tp = 8x20μs.
3. Clamping voltage value is based on an 8x20 μs peak pulse current (I
4. No purposefully added lead. Halogen and Antimony Free.
5. Product manufactured with Data Code V9 (week 33, 2008) and newer are built with Green Molding Compound. Product manufactured
Max (V)
⎯
= 25°C unless otherwise specified
A
Test
Current
IT (mA) IR (μA) VC (V)
1.0 20 11.0 17 1.6
Max. Reverse
Leakage @ V
1 of 4
www.diodes.com
P
R
TJ, T
RWM
) waveform.
pp
k
JA
STG
Max. Clamping
Voltage @ I
(Note 3)
pp
= 1A
300 W
286
-55 to +150
Max. Peak Pulse
Current (Note 2)
(A) (pF)
Fire Retardants.
2O3
°C/W
°C
Typical Total
Capacitance
(Note 1)
September 2009
© Diodes Incorporated
Page 2
P
P
U
RATIN
G IN
O
C, TOT
CAPACITANC
pF)
A
A
DLP05LC
100
F
75
%
50
LSE DE
25
pp pp
PEAK POWER OR CURRENT
EAK
0
0 25 50 75 100 125 150 175 200
T , AMBIENT TEMPERATURE ( C)
A
Fig. 1 Pulse Derating Curve
2.0
1.8
1.6
E (
1.4
°
f = 1MHz
I , PEAK PULSE CURRENT (%I )
t, TIME (µs)
Fig. 2 Pulse Waveform
10
Non Repetitive
Pulse Wave f orm
See Note 5
1
1.2
1.0
0.8
AL
0.6
T
0.4
0.1
D
P , PEAK PULSE POWER (kW)
0.2
0
012 3 45
V , REVERSE VOLT AGE (V)
R
Fig. 3 Typical Total Capacitance
0.01
0.1 1.0
t , PULSE WIDTH (µs)
10
p
100
Fig. 4 Pulse Rating Curve
1,000
Ordering Information (Note 6)
Part Number Case Packaging
DLP05LC-7-F SOT-23 3000/Tape & Reel
Notes: 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
05
Date Code Key
Year 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Code T U V W X Y Z A B C
Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Code 1 2 3 4 5 6 7 8 9 O N D
DLP05LC
Document number: DS30283 Rev. 11 - 2
www.diodes.com
05 = Product Type Marking Code
YM = Date Code Marking
Y = Year (ex: T = 2006)
YM
M = Month (ex: 9 = September)
2 of 4
September 2009
© Diodes Incorporated
Page 3
V
DLP05LC
Typical Application Schemes
D+
D-
USB OUTPUT
CONNECTOR
CC
GROUND
TYPICAL APPLICATION SCHEMA TICS
TYPICAL USB DA TA LINE APPLICATION
IC
TYPICAL V POWER LINE PROTECTION
CC
USB INPUT
CONNECTOR
Package Outline Dimensions
K
J
A
SOT-23
Dim Min Max Typ
A 0.37 0.51 0.40
C
B
B 1.20 1.40 1.30
C 2.30 2.50 2.40
D 0.89 1.03 0.915
F 0.45 0.60 0.535
H
K1
F
D
G
L
M
G 1.78 2.05 1.83
H 2.80 3.00 2.90
J 0.013 0.10 0.05
K 0.903 1.10 1.00
K1 - - 0.400
L 0.45 0.61 0.55
M 0.085 0.18 0.11
0° 8° -
α
All Dimensions in mm
Suggested Pad Layout
DLP05LC
Document number: DS30283 Rev. 11 - 2
Y
Dimensions Value (in mm)
Z 2.9
Z
C
X 0.8
Y 0.9
C 2.0
E 1.35
X
E
3 of 4
www.diodes.com
September 2009
© Diodes Incorporated
Page 4
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorize d application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2009, Diodes Incorporated
www.diodes.com
DLP05LC
DLP05LC
Document number: DS30283 Rev. 11 - 2
4 of 4
www.diodes.com
September 2009
© Diodes Incorporated
Loading...