Diodes D5V0P4B5LP08 User Manual

Page 1
Features
Provides ESD Protection per IEC 61000-4-2 Standard:
Air ±15kV, Contact ±15kV
4 Channel of ESD Protection
Low Channel Input Capacitance of 4.8pF Typical
IEC 61000-4-5 (Surge): 3A (tp = 8x20µs)
Ultra Low Leakage Current 100nA (max)
Typically Used in Cellular Handsets, Portable Electronics,
Communication Systems, Computers and Peripherals
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
1
4
Pin Configuration
Mechanical Data
Case: X2-DFN0808-4
Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminal Connections: See Diagram
Terminals: Finish NiPdAu annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Weight: 0.0015 grams (Approximate)
2
GND
3
Top View
D5V0P4B5LP08
4 CHANNEL BI-DIRECTIONAL TVS ARRAY
e4
Ordering Information (Note 4)
Product Compliance Marking Reel size(inches) Tape width(mm) Quantity per reel
D5V0P4B5LP08-7 Standard SB 7 8 10,000/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
SB
SB = Product Type Marking Code
D5V0P4B5LP08
Document number: DS36249 Rev. 1 - 2
1 of 5
www.diodes.com
March 2014
© Diodes Incorporated
Page 2
D5V0P4B5LP08
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit Conditions
Peak Pulse Power Dissipation
Peak Pulse Current
ESD Protection – Contact Discharge
ESD Protection – Air Discharge
P
PP
I
PP
V
ESD_Contact
V
ESD_Air
40 W 8/20µs
3 A 8/20µs
±15 kV IEC 61000-4-2 Standard
±15 kV IEC 61000-4-2 Standard
Thermal Characteristics
Characteristic Symbol Value Unit
Package Power Dissipation (Note 5)
Thermal Resistance, Junction to Ambient (Note 5)
Operating and Storage Temperature Range
P
D
R
θJA
T
, T
J
STG
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Conditions
Reverse Standoff Voltage
Leakage Current (Note 6)
Clamping Voltage from Data Pin to GND
Clamping Voltage from GND to Data Pin
Dynamic Resistance
IO Capacitance
Breakdown Voltage from Data Pin to GND
Breakdown Voltage from GND to Data Pin
Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
7. Extraction of RDYN using least squares fit of TLP between I = 10A and I = 20A.
V
R
V
V
RWM
I
V
V
C
RM
CL1
CL2
DYN
IO
BRF
BRR
— — ±5.5 V
— — 100 nA
— —
— —
— —
10 13
9
13
0.45
0.42
— —
— —
— —
— 4.8 7 pF
6 — — V
6 — — V
40V/div 20ns/div
40V/div 20ns/div
300 mW
417
-65 to +150
V
= 5V
RWM
I
= 1A, tp = 8/20μS
PP
V
V
= 3A, tp = 8/20μS
I
PP
I
= 1A, tp = 8/20μS
PP
= 3A, tp = 8/20μS
I
PP
Pins to GND (Note 7) GND to Pins (Note 7)
VIO = 2.5V, f = 1MHz
IR = 1mA
IR = 1mA
°C/W
°C
Figure 1 IEC 6100-4-2 Clamping Voltage
+8kV Contact
D5V0P4B5LP08
Document number: DS36249 Rev. 1 - 2
2 of 5
www.diodes.com
Figure 2 IEC 6100-4-2 Clamping Voltage
-8kV Contact
March 2014
© Diodes Incorporated
Page 3
C
URRENT
CUR
R
T
CUR
REN
T
C
URREN
T
C
O C
P
C
T
C
F
20
18
RDYN = 0.32 t = 100ns
PW
t = 10ns
RISE
Ω
16
20
18
16
RDYN = 0.32 t = 100ns
PW
t = 10ns
RISE
Ω
D5V0P4B5LP08
14
12
(A)
10
8
6
4
2
0
0246810
VOLTAGE (V)
Figure 3 TLP, t = 100nS, t = 10nS,
PW RISE
Data to GND
0.0010
0.0008
0.0006
0.0004
0.0002
0.0000
-0.0002
CURRENT (A)
-0.0004
-0.0006
-0.0008
-0.0010
-8 -6 -4 -2 0 2 4 6 8 10
-10 VOLTAGE (V)
Figure 5 IV Curve
4.5
4
3.5
3
(A)
2.5
2
1.5
1
0.5
12 14
Current
Power
45
40
35
30
25
20
15
10
5
12
14
12
(A)
10
EN
8
6
4
2
0
0246810
12 14
VOLTAGE (V)
Figure 4 TLP, t = 100nS, t = 10nS,
4.5
4
3.5
3
PW RISE
GND to Data
Current
Power
45
40
35
30
(A)
2.5
2
25
20
POWER (W)
1.5
1
0.5
0
0 5 10 15 20 25 30
15
10
5
0
TIME (µs)
Figure 6 Surge Curves, Data to GND
8
7.5
)
7
E (p
6.5
AN I
6
A
POWER (W)
A
5.5
, I
IO
5
f = 1MHz
4.5
0
0 5 10 15 20 25 30
TIME (µs)
Figure 7 Surge Curves, GND to Data
0
4
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
V , REVERSE VOLTAGE (V)
R
Figure 8 Typical Junction Capacitance
D5V0P4B5LP08
Document number: DS36249 Rev. 1 - 2
3 of 5
www.diodes.com
March 2014
© Diodes Incorporated
Page 4
O
2
3
0
-3
-6
-9
-12
-15
SS (dB)
-18
L
-21
-24
-27
-30
-33 100k 1M 10M 100M 1G 3G
FREQUENCY (Hz)
Figure 9 Insertion Loss
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
A
Pin #1 ID
R0.05 TYP
E
L (4x)
Z (4x)
A1
D e
K
E2
b (4x)
A3
Seating Plane
D2
L1 (4x)
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
Y (4x)
X
C
1
X
X (4x)
Y
1
2
Y
X2-DFN0808-4
Dim Min Max Typ
A 0.25 0.35 0.30 A1 0 0.04 0.02 A3 - - 0.13
b 0.17 0.27 0.22
D 0.75 0.85 0.80 D2 0.15 0.35 0.25
E 0.75 0.85 0.80 E2 0.15 0.35 0.25
e - - 0.48
K 0.20 - -
L 0.17 0.27 0.22 L1 0.02 0.12 0.07
Z - - 0.05
All Dimensions in mm
Dimensions
C 0.480
X 0.320 X1 0.300 X2 0.800
Y 0.320 Y1 0.300 Y2 0.900
Value
(in mm)
D5V0P4B5LP08
D5V0P4B5LP08
Document number: DS36249 Rev. 1 - 2
4 of 5
www.diodes.com
March 2014
© Diodes Incorporated
Page 5
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated.
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2014, Diodes Incorporated
www.diodes.com
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
IMPORTANT NOTICE
LIFE SUPPORT
D5V0P4B5LP08
D5V0P4B5LP08
Document number: DS36249 Rev. 1 - 2
5 of 5
www.diodes.com
March 2014
© Diodes Incorporated
Loading...