Diodes D5V0F4U5P5 User Manual
Features
IEC 61000-4-2 (ESD): Air – ±15kV, Contact – ±12kV
4 Channels of ESD Protection
Low Channel Input Capacitance of 0.5pF Typical
Typically Used at High Speed Ports such as USB 2.0,
IEEE1394, Serial ATA, DVI, HDMI, PCI
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
54
321
Pin Description (Top View)
D5V0F4U5P5
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY
Mechanical Data
Case: SOT953
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminal Finish: Matte Tin, Annealed Over Copper Leadframe.
Solderable per MIL-STD-202, Method 208
Weight: 0.002 grams (approximate)
Pin 1 Pin 3
Device Schematic
2
Pin 4
Pin 5
Ordering Information (Note 4)
Product Compliance Marking Reel size(inches) Tape width(mm) Quantity per reel
D5V0F4U5P5-7 AEC-Q101 V3 7 8 10,000/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
D5V0F4U5P5
Document number: DS36219 Rev. 2 - 2
V3
V3 = Product type marking code
1 of 5
www.diodes.com
January 2014
© Diodes Incorporated
t
r
P, P
O
R
P
TIO
N
P
P
U
R
T
G
O
F
D5V0F4U5P5
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit Conditions
Peak Pulse Current
ESD Protection – Contact Discharge
ESD Protection – Air Discharge
I
PP
V
ESD_Contac
V
ESD_Ai
2.0 A
±12 kV
±15 kV
8/20µs (Note 7)
Standard IEC 61000-4-2
Standard IEC 61000-4-2
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (Note 5)
Thermal Resistance, Junction to Ambient TA = +25°C R
Operating and Storage Temperature Range
P
D
θJA
T
, T
J
STG
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Conditions
Reverse Standoff Voltage
Channel Leakage Current (Note 6)
Reverse breakdown voltage
Forward voltage
Clamping Voltage, Positive Transients (Note 7)
V
RWM
I
V
V
V
R
BR
F
C
— — 5.5 V
— — 100 nA
6.0 — — V
— 0.85 — V
— 9.5 11.5
— 10.5 12.5
— 0.5 —
Channel Input Capacitance (Note 8)
C
T
— 0.4 0.65
Dynamic Resistance
Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
7. Clamping voltage value is based on an 8x20µs peak pulse current (I
8. Measured from any I/O to GND.
9. For information on the impact of Diodes' USB 2.0 compatible ESD protectors on signal integrity including eye diagram plots, please refer to AN77 at the
following URL: http://www.diodes.com/destools/appnote_dnote.html.
R
DYN
400
350
Note 5
— 0.9 — Ω
) waveform.
pp
100
300 mW
417
-55 to +150
VR = 5V, Any I/O to GND
IR = 1mA
IF = 4mA
= 1A, tp = 8/20μs
I
PP
V
I
= 2A, tp = 8/20μs
PP
= 0V, f = 1MHz, Any I/O to
V
R
GND
pF
= 2.5V, f = 1MHz, Any I/O to
V
R
GND
IPP = 1A, tp = 8/20μs
C/W
C
(mW)
A
300
250
200
75
%
IN
A
50
DISSI
WE
D
150
100
LSE DE
EAK
PEAK POWER OR CURRENT
25
50
0
0
25
50 75
T , AMBIENT TEMPERATURE ( C)
A
Figure 1 Power Derating Curve
D5V0F4U5P5
Document number: DS36219 Rev. 2 - 2
125 175
100
150
°
2 of 5
www.diodes.com
0
0
25 50
T , AMBIENT TEMPERATURE (°C)
A
75 100 125
Figure 2 Pulse Derating Curve
175 200
150
January 2014
© Diodes Incorporated
Loading...