Page 1
D5V0F1U2LP3
LOW CAPACITANCE UNIDIRECTIONAL TVS DIODE
Features
• Ultra-Small, Low Profile Leadless Surface Mount Package (0.6 *
0.3 * 0.3mm)
• IEC 61000-4-2 (ESD): Air – ±20kV, Contact – ±15kV
• 1 Channel of ESD Protection
• Low Channel Input Capacitance of 0.5pF Typical
• Typically Used at High Speed Ports such as USB 3.0,
IEEE1394, Serial ATA, DVI, HDMI, PCI
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
NEW PRODUCT
NEW PRODUCT
Ordering Information (Note 4)
Product Compliance Marking Reel size(inches) Tape width(mm) Quantity per reel
D5V0F1U2LP3-7 Standard TK 7 8 10,000/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html
Top View
X3-DFN0603-2
Bottom View
Mechanical Data
• Case: X3-DFN0603-2
• Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish − Matte Tin over Copper leadframe, solderable
per MIL-STD-202, Method 208
• Weight: 0.0002 grams (approximate)
Device Schematic
Pin 1
Pin 2
Marking Information
D5V0F1U2LP3
Document number: DS35462 Rev. 3 - 2
TK
TK = Product Type Marking Code
Bar Denotes Pin 1 or Cathode Side
1 of 4
www.diodes.com
April 2014
© Diodes Incorporated
Page 2
t
r
θ
P, P
O
R D
PATIO
N
P
P
U
R
TIN
G
O
F
D5V0F1U2LP3
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit Conditions
Peak Pulse Current
ESD Protection – Contact Discharge
ESD Protection – Air Discharge
I
PP
V
ESD_Contac
V
ESD_Ai
1.5 A
±15 kV
±20 kV
8/20μs, Per Figure 3
Standard IEC 61000-4-2
Standard IEC 61000-4-2
Thermal Characteristics
Characteristic Symbol Value Unit
Package Power Dissipation (Note 5)
Thermal Resistance, Junction to Ambient (Note 5)
Operating and Storage Temperature Range
P
D
R
JA
T
, T
J
STG
NEW PRODUCT
Electrical Characteristics (@T
NEW PRODUCT
Characteristic Symbol Min Typ Max Unit Test Conditions
Reverse Working Voltage
Reverse Current (Note 6)
Reverse Breakdown Voltage
Reverse Clamping Voltage, Positive Transients
(Note 7)
Dynamic Resistance
Capacitance (Note 8)
Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
7. Clamping voltage value is based on an 8x20µs peak pulse current (I
8. Measured from any I/O to GND.
9. For information on the impact of Diodes' USB 2.0 compatible ESD protectors on signal integrity including eye diagram plots, please refer to AN77 at the
following URL: http://www.diodes.com/destools/appnote_dnote.html.
250
225
200
(mW)
175
= +25°C unless otherwise specified)
A
V
RWM
I
R
V
BR
V
CL
R
DYN
C
T
Note 5
— — 5.5 V —
— — 100 nA
6.0 — — V
— 10 12 V
— 0.9 — Ω
— 0.4 0.65 pF
— 0.5 — pF
) waveform.
pp
100
75
%
250 mW
500
-65 to +150
VR = 5.0V
IR = 1mA
IPP = 1A, tp = 8/20μs
IR = 1A, tp = 8/20μs
V
= 2.5V, f = 1MHz
R
V
= 0V, f = 1MHz
R
°C/W
°C
ISSI
WE
D
150
125
100
75
50
A
LSE DE
EAK
PEAK POWER OR CURRENT
50
25
25
0
0125175
25 10050 75 150
T , AMBIENT TEMPERATURE ( C)
A
Figure 1 Power Derating Curve
°
0
0
25 50
T , AMBIENT TEMPERATURE (°C)
A
75 100 125
Figure 2 Pulse Derating Curve
150
175 200
D5V0F1U2LP3
Document number: DS35462 Rev. 3 - 2
2 of 4
www.diodes.com
April 2014
© Diodes Incorporated
Page 3
C, TOT
CAPACITANC
NEW PRODUCT
NEW PRODUCT
PppP
I , PEAK PULSE CURRENT (%I )
100
100
50
D5V0F1U2LP3
1000
Peak Value I
0
0
Figure 3 Pulse Waveform
pp
Half Value I /2
8x20 Waveform
as defined by R.E.A.
pp
20 40
t, TIME ( s)
μ
60
100
T = 150°C
10
1
0.1
F
0.01
I , INSTANTANEOUS FORWARD CURRENT (mA)
300 400 500 600 700 800 900 1000 1100
V , INSTANTANEOUS FORWARD VOLTAGE (mV)
F
Figure 4 Typical Forward Characteristics
A
T = 125°C
A
T = 85°C
A
T = 25°C
A
T = -55°C
A
0.6
0.55
f = 1MHz
Note 8
0.5
E (pF)
T = 150°C
A
0.45
0.4
10
R
I , LEAKAGE CURRENT (nA)
T = 125°C
A
T = -55°C
A
T = 85°C
A
T = 25°C
A
1
012345
V , REVERSE VOLTAGE (V)
R
Figure 5 Typical Reverse Characteristics
5.5
0.35
0.3
AL
0.25
T
0.2
0.15
0.1
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
V , REVERSE VOLTAGE (V)
R
Figure 6 Total Capacitance vs. Reverse Voltage
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
D5V0F1U2LP3
Document number: DS35462 Rev. 3 - 2
A
X3-DFN0603-2
A1 (2x)
D
e
Dim Min Max Typ
A 0.27 0.35 0.30
A1 0.00 0.03 0.02
b 0.19 0.29 0.24
D 0.595 0.645 0.62
E 0.295 0.345 0.32
e - - 0.355
E
L (2x )
b (2x)
3 of 4
www.diodes.com
L 0.14 0.24 0.19
All Dimensions in mm
April 2014
© Diodes Incorporated
Page 4
D5V0F1U2LP3
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
Y
X
NEW PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2014, Diodes Incorporated
www.diodes.com
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
X
1
Dimensions Value (in mm)
C 0.355
G 0.150
X 0.230
X1 0.610
Y 0.300
G
C
IMPORTANT NOTICE
LIFE SUPPORT
D5V0F1U2LP3
Document number: DS35462 Rev. 3 - 2
4 of 4
www.diodes.com
April 2014
© Diodes Incorporated
Loading...