Diodes D1213A-04S User Manual
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY
Features
• IEC 61000-4-2 (ESD): Air ±15kV, Contact ±8kV
• 4 Channels of ESD Protection
• Low Channel Input Capacitance of 0.85pF Typical
• Typically Used at High Speed Ports such as USB 2.0,
IEEE1394, Serial ATA, DVI, HDMI, PCI
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
NEW PRODUCT
SOT363
Top View
Mechanical Data
• Case: SOT363
• Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish annealed over Alloy 42 leadframe
(Lead Free Plating) Solderable per MIL-STD-202, Method 208
• Weight: 0.006 grams (approximate)
V
CH 4
654
123
CH 1
Device Schematic
CH 3
P
V
CH 2
N
D1213A-04S
Ordering Information (Note 4)
Part Number Case Packaging
D1213A-04S-7 SOT363 3000/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
Date Code Key
Year 2011 2012 2013 2014 2015 2016 2017
Code Y Z A B C D E
Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Code 1 2 3 4 5 6 7 8 9 O N D
TE1
D1213A-04S
Document number: DS35600 Rev. 8 - 2
TE1 = Product Type Marking Code
YM = Date Code Marking
Y = Year (ex: Z = 2012)
YM
M = Month (ex: 9 = September)
1 of 5
www.diodes.com
October 2012
© Diodes Incorporated
t
r
θ
Maximum Ratings (@T
A
Characteristic Symbol Value Unit Conditions
Operating Supply Voltage
DC Voltage at any Channel Input Peak Pulse Current
ESD Protection – Contact Discharge
ESD Protection – Air Discharge
Thermal Characteristics
NEW PRODUCT
Power Dissipation (Note 5)
Thermal Resistance, Junction to Ambient (Note 5)
Operating and Storage Temperature Range
Characteristic Symbol Value Unit
= +25°C, unless otherwise specified.)
- VN
V
P
I
PP
V
ESD_Contac
V
ESD_Ai
(V
6.0 V
– 0.5) to (VP + 0.5)
N
5.0 A
±8 kV
±15 kV
P
R
, T
T
J
D
JA
STG
D1213A-04S
-
V
8/20µs, Per Figure 3
IEC 61000-4-2 Standard
IEC 61000-4-2 Standard
200 mW
625
-55 to +150
-
°C/W
°C
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Conditions
Operating Supply Voltage
Operating Supply Current (Note 6)
Channel Leakage Current (Note 6)
V
P
I
P
I
R
Reverse breakdown voltage VBR 6.0 - - V
Clamping Voltage, Positive Transients
Clamping Voltage, Negative Transients
Forward Voltage for Top Diode
Forward Voltage for Bottom Diode
Dynamic Resistance
Channel Input Capacitance
Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
7. Clamping voltage value is based on an 8x20μs peak pulse current (I
8. Measured from any channel to V
9. Measured from V
10. For information on the impact of Diodes' USB 2.0 compatible ESD protectors on signal integrity including eye diagram plots, please refer to AN77 at the
following URL: http://www.diodes.com/destools/appnote_dnote.html.
P to VN.
N.
V
CL1
V
CL2
V
FD1
V
FD2
R
DYN
C
T
-
- - 8.0
- 0.1 1.0
-
- -1.7 - V
0.60 0.80 0.95 V
0.60 0.80 0.95 V
- 0.9 -
- 0.85 1.2 pF
3.3 5.5 V
10.0 - V
) waveform.
pp
μA
(VP – VN) = 3.3V
μA
VP = 5V, VN = 0V
I
R
I
PP
IPP = -1A (Note 7)
IF = 8mA, any channel to VP
IF = 8mA, VN to and channel
Ω
I
PP
V
V
−
= 1mA
= 1A (Note 7)
= 1A (Note 7)
= 1.65V, VP = 3.3V,
IN
= 0V, f = 1MHz
N
D1213A-04S
Document number: DS35600 Rev. 8 - 2
2 of 5
www.diodes.com
October 2012
© Diodes Incorporated
Loading...