Diodes D1213A-04MR User Manual
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY
MSOP-10
Top View
Mechanical Data
• Case: MSOP-10
• Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish annealed over Copper leadframe
(Lead Free Plating). Solderable per MIL-STD-202, Method 208
• Weight: 0.026 grams (approximate)
1Ch1
2
NC
V
3
P
Ch2
NC
4
5
Device Schematic
Features
• IEC 61000-4-2 (ESD): Air ±15kV, Contact ±8kV
• 4 Channels of ESD Protection
• Low Channel Input Capacitance of 0.85pF Typical
• Typically Used at High Speed Ports such as USB 2.0,
IEEE1394, Serial ATA, DVI, HDMI, PCI
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
ADVANCE INFORMATION
Pin# Description
1, 4, 6, 9 Inputs
2, 5, 7, 10 No Connection
8 VN, Ground
3 Vp, Power
Pin Description
D1213A-04MR
NC
10
9
Ch4
V
8
N
NC
7
6
Ch3
Ordering Information (Note 4)
Part Number Case Packaging
D1213A-04MR-13 MSOP-10 2500/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
TV13
YYWW
TV13 = Product Type Marking Code
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 12 = 2012)
WW = Week Code (01 ~ 53)
D1213A-04MR
Document number: DS35595 Rev. 6 - 2
1 of 5
www.diodes.com
November 2012
© Diodes Incorporated
t
r
θ
Maximum Ratings (@T
Characteristic Symbol Value Unit Conditions
Operating Supply Voltage
DC Voltage at any Channel Input Peak Pulse Current
ESD Protection – Contact Discharge
ESD Protection – Air Discharge
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (Note 5)
Thermal Resistance, Junction to Ambient (Note 5)
ADVANCE INFORMATION
Operating and Storage Temperature Range
= +25°C, unless otherwise specified.)
A
- VN
V
P
– 0.5) to (VP + 0.5)
(V
N
I
PP
V
ESD_Contac
V
ESD_Ai
6.0 V
V
5 A
±8 kV
±15 kV
P
D
R
JA
T
, T
J
STG
500 mW
250
-65 to +150
8/20 μs, Per Fig. 3
Standard IEC 61000-4-2
Standard IEC 61000-4-2
D1213A-04MR
-
-
°C/W
°C
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Conditions
Operating Supply Voltage
Operating Supply Current (Note 6)
Channel Leakage Current (Note 6)
Reverse breakdown voltage
Clamping Voltage, Positive Transients
Clamping Voltage, Negative Transients
Forward Voltage for Top Diode
Forward Voltage for Bottom Diode
Dynamic Resistance
Channel Input Capacitance
Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
7. Clamping voltage value is based on an 8x20μs peak pulse current (I
8. Measured from any channel to V
9. Measured from V
10. For information on the impact of Diodes' USB 2.0 compatible ESD protectors on signal integrity including eye diagram plots, please refer to AN77 at the
following URL: http://www.diodes.com/destools/appnote_dnote.html.
P to VN.
N
V
P
I
P
I
R
V
BR
V
CL1
V
CL2
V
FD1
V
FD2
R
DYN
C
T
-
- - 8.0
- 0.1 1.0
6.0 - - V
-
- -1.7 - V
0.60 0.80 0.95 V
0.60 0.80 0.95 V
- 0.9 -
- 0.85 1.2 pF
3.3 5.5 V
10.0 - V
) waveform.
pp
μA
(VP – VN) = 3.3V
μA
VP = 5V, VN = 0V
IR = 1mA
I
PP
IPP = -1A (Note 7)
IF = 8mA, any channel to VP
IF = 8mA, VN to and channel
Ω
IPP = 1A (Note 7)
V
V
−
= 1A (Note 7)
= 1.65V, VP = 3.3V,
IN
= 0V, f = 1MHz
N
D1213A-04MR
Document number: DS35595 Rev. 6 - 2
2 of 5
www.diodes.com
November 2012
© Diodes Incorporated
Loading...