Diodes D1213A-02SO User Manual
Features
• IEC 61000-4-2 (ESD): Air – ±15kV, Contact – ±8kV
• 2 Channels of ESD Protection
• Low Channel Input Capacitance of 0.85pF Typical
• Typically Used at High Speed Ports such as USB 2.0,
IEEE1394, Serial ATA, DVI, HDMI, PCI
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
NEW PRODUCT
NEW PRODUCT
SOT26
Top View
2 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY
Mechanical Data
• Case: SOT26
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish annealed over Copper leadframe
(Lead Free Plating). Solderable per MIL-STD-202, Method 208
• Weight: 0.016 grams (approximate)
VPNC CH 2
654
CH 1 CH 2
13
2
V
NC CH 1
Pin Configuration Device Schematic
N
V
P
V
N
D1213A-02SO
Ordering Information (Note 4)
Part Number Case Packaging
D1213A-02SO-7 SOT26 3000/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
Date Code Key
Year 2012 2013 2014 2015 2016 2017 2018
Code Z A B C D E F
Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Code 1 2 3 4 5 6 7 8 9 O N D
UV1
YM
D1213A-02SO
Document number: DS35830 Rev. 3 - 2
UV1 = Product Type Marking Code
YM = Date Code Marking
Y = Year (ex: Z = 2012)
M = Month (ex: 9 = September)
1 of 5
www.diodes.com
November 2012
© Diodes Incorporated
t
r
θ
Maximum Ratings (@T
Characteristic Symbol Value Unit Conditions
Operating Supply Voltage
DC Voltage at any Channel Input Peak Pulse Current
ESD Protection – Contact Discharge
ESD Protection – Air Discharge
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (Note 5)
Thermal Resistance, Junction to Ambient (Note 5)
NEW PRODUCT
Operating and Storage Temperature Range
NEW PRODUCT
= +25°C, unless otherwise specified)
A
V
- VN
P
I
PP
V
ESD_Contac
V
ESD_Ai
(V
6.0 V
– 0.5) to (VP + 0.5)
N
5 A
±8 kV
±15 kV
T
D1213A-02SO
—
V
8/20µs, Per Figure 3
Standard IEC 61000-4-2
Standard IEC 61000-4-2
P
D
R
JA
, T
J
STG
400 mW
310
-65 to +150
—
°C/W
°C
Electrical Characteristics (@T
= +25°C, unless otherwise specified)
A
Characteristic Symbol Min Typ Max Unit Test Conditions
Operating Supply Voltage
Operating Supply Current (Note 6)
Channel Leakage Current (Note 6)
Reverse breakdown voltage
Clamping Voltage, Positive Transients
Clamping Voltage, Negative Transients
Forward Voltage for Top Diode
Forward Voltage for Bottom Diode
Dynamic Resistance
Channel Input Capacitance
Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
7. Measured from CH1 to V
8. Measured from V
9. For information on the impact of Diodes' USB 2.0 compatible ESD protectors on signal integrity including eye diagram plots, please refer to AN77 at the
following URL: http://www.diodes.com/destools/appnote_dnote.html.
N or CH2 to VN.
P to VN.
V
P
I
P
I
R
V
BR
V
CL1
V
CL2
V
FD1
V
FD2
R
DYN
C
T
— 3.3 5.5 V —
— — 8.0 µA
— ±0.1 ±1.0 µA
6.0 — — V
— 10.0 — V
— -1.7 — V
0.60 0.80 0.95 V
0.60 0.80 0.95 V
— 0.9 —
— 0.85 1.2 pF
(VP – VN) = 3.3V
VP = 5V, VN = 0V
IR = 1mA
IPP = 1A, tp = 8/20μs
IPP = -1A, tp = 8/20μs
IF = 8mA, CH1 to VP or CH2 to V
IF = 8mA, VN to CH1 or VN to CH2
Ω
IPP = 1A, tp = 8/20μs
= 1.65V, VP = 3.3V,
V
IN
= 0V, f = 1MHz
V
N
P
D1213A-02SO
Document number: DS35830 Rev. 3 - 2
2 of 5
www.diodes.com
November 2012
© Diodes Incorporated
Loading...