Page 1
)
θ
(BR)
Please click here to visit our online spice models database.
QUAD SURFACE MOUNT LOW LEAKAGE DIODE
Features
• Surface Mount Package Ideally Suited for Automated Insertion
• Very Low Leakage Current
• Lead Free/RoHS Compliant (Note 3)
• "Green" Device (Notes 4 and 5)
• Qualified to AEC-Q101 Standards for High Reliability
Maximum Ratings @T
= 25°C unless otherwise specified
A
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Forward Continuous Current (Note 2) Single diode
Double diode
Repetitive Peak Forward Current (Note 2)
Non-Repetitive Peak Forward Surge Current @ t = 1.0μs
@ t = 1.0ms
@ t = 1.0s
TOP VIEW
Mechanical Data
• Case: SOT-363
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish - Matte Tin annealed over Alloy 42 leadframe
(Lead Free Plating). Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Marking Information: See Page 2
• Ordering Information: See Page 2
• Weight: 0.008 grams (approximate)
SOT-363
V
V
V
R(RMS
I
I
Internal Schematic
RRM
RWM
VR
IFM
FRM
FSM
AC
1
A
1
TOP VIEW
A
C
2
2
AC
C
1
2
85 V
60 V
160
140
500 mA
4.0
1.0
0.5
BAV199DW
mA
A
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (Note 2)
Thermal Resistance Junction to Ambient Air (Note 2)
Operating and Storage Temperature Range
Electrical Characteristics @T
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 1)
Forward Voltage
Leakage Current (Note 1)
Total Capacitance
Reverse Recovery Time
Notes: 1. Short duration pulse test used to minimize self-heating effect.
Code UO are built with Non-Green Molding Compound and may contain Halogens or Sb
BAV199DW
Document number: DS30417 Rev. 9 - 2
2. Part mounted on FR-4 PC board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
3. No purposefully added lead.
4. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
5. Product manufactured with Date Code UO (week 40, 2007) and newer are built with Green Molding Compound. Product manufactured prior to Date
A
PD
R
TJ , T
= 25°C unless otherwise specified
V
R
85
VF ⎯ ⎯
IR
⎯ ⎯
CT ⎯
trr
⎯ ⎯
1 of 4
www.diodes.com
JA
STG
⎯ ⎯
0.90
1.0
1.1
1.25
5.0
80
2
⎯
3.0
Fire Retardants.
2O3
200 mW
625
-65 to +150
V
IR = 100μA
IF = 1.0mA
IF = 10mA
V
IF = 50mA
IF = 150mA
VR = 75V
nA
nA
VR = 75V, TJ = 150°C
pF
VR = 0, f = 1.0MHz
IF = IR = 10mA,
μs
I
= 0.1 x IR, RL = 100Ω
rr
°C/W
°C
August 2009
© Diodes Incorporated
Page 2
P, P
O
R
P
T
O
N
T
T
O
US FORWAR
C
URRENT
TANT
O
US R
R
CUR
RENT
O
RWARD CUR
RENT
300
250
(mW)
I
200
A
150
DISSI
WE
100
D
50
0
0 25 50 75 100 125 150
10
(nA)
T , AMBIENT TEMPERATURE (°C)
A
Fig. 1 Power Derating Curve, Total Package
1,000
(mA)
100
D
10
1.0
ANE
0.1
AN
F
0.01
I, INS
0
Fig. 2 Typical Forward Characteristics, Per Element
300
250
0.4
V , INSTANTANEOUS FORWARD VOLTAGE (V)
F
0.8
1.2 1.6
Device mounted on an
FR4 printed-circuit board
BAV199DW
2.0
(mA)
SE
EVE
1
ANE
R
0.1
I , INS
050
T , AMBIENT TEMPERATURE ( C)
Fig. 3 Typical Reverse Cha r acteristic s, P e r Element
A
150100 200
°
200
150
100
F
I, F
50
0
0 50 100 150 200
T , AMBIENT TEMPERATURE ( C)
A
Fig. 4 Current Derating Curve, Per Element
°
Ordering Information (Notes 5 & 6)
Part Number Case Packaging
BAV199DW-7-F SOT-363 3000/Tape & Reel
Notes: 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
K52
YM
Date Code Key
Year 2006 2007 2008 2009 2010 2011 2012
Code T U V W X Y Z
Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Code 1 2 3 4 5 6 7 8 9 O N D
BAV199DW
Document number: DS30417 Rev. 9 - 2
K52 = Product Type Marking Code
YM
YM = Date Code Marking
K52
Y = Year (ex: T = 2006)
M = Month (ex: 9 = September)
2 of 4
www.diodes.com
August 2009
© Diodes Incorporated
Page 3
Package Outline Dimensions
K
J
A
B C
H
D
F
Suggested Pad Layout
G
Z
Y
C2
X
BAV199DW
SOT-363
Dim Min Max
A 0.10 0.30
B 1.15 1.35
C 2.00 2.20
D 0.65 Typ
F 0.40 0.45
H 1.80 2.20
M
L
C2
C1
J 0 0.10
K 0.90 1.00
L 0.25 0.40
M 0.10 0.22
α
All Dimensions in mm
Dimensions Value (in mm)
0° 8°
Z 2.5
G 1.3
X 0.42
Y 0.6
C1 1.9
C2 0.65
BAV199DW
Document number: DS30417 Rev. 9 - 2
3 of 4
www.diodes.com
August 2009
© Diodes Incorporated
Page 4
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorize d application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2009, Diodes Incorporated
www.diodes.com
BAV199DW
BAV199DW
Document number: DS30417 Rev. 9 - 2
4 of 4
www.diodes.com
August 2009
© Diodes Incorporated
Loading...