Page 1
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Description
The 74LVCE1G07 is a single inverter gate with an open drain
output. The device is designed for operation with a power
supply range of 4V to 5.5V. The input is tolerant to 5.5V
allowing this device to be used in a mixed voltage
environment. The device is fully specified for partial power
down applications using I
output preventing damaging current backflow when the
device is powered down. The open-drain output can be
connected to other open drain outputs to implement activelow wired-OR or active-high wired-AND functions. The
maximum sink current is 32 mA.
Features
NEW PRODUCT
• Wide Supply Voltage Range from 1.65 to 5.5V
• ± 24mA Output Drive at 3.3V
• CMOS low power consumption
• I
Supports Partial-Power-Down Mode Operation
OFF
• Inputs accept up to 5.5V
• ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115-A)
Exceeds 2000-V Human Body Model (A114-A)
• Latch-Up Exceeds 100mA per JESD 78, Class II
• Range of Package Options
• Direct Interface with TTL Levels
• SOT25, SOT353, and DFN1410: Assembled with “Green”
Molding Compound (no Br, Sb)
• Lead Free Finish/ RoHS Compliant (Note 1)
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
2. Pin 2 and pin 5 of the DFN1410 package are internally connected.
OFF
. The I
circuitry disables the
OFF
Pin Assignments
NC
A
GND
NC
GND
Applications
• Voltage Level Shifting
• General Purpose Logic
• Power Down Signal Isolation
• Wide array of products such as.
o PCs, networking, notebooks, netbooks, PDAs
o Computer peripherals, hard drives, CD/DVD ROM
o TV, DVD, DVR, set top box
o Cell Phones, Personal Navigation / GPS
o MP3 players ,Cameras, Video Recorders
(Top View)
1
2
SOT25 / SOT353
(Top View)
1
2
A
3
DFN1410 (Note 2)
Vcc
5
43
Y
6
Vcc
5
NC
4
Y
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
1 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Page 2
Pin Descriptions
Pin Name Description
NC
A
GND
Y
Vcc
Logic Diagram
A
NEW PRODUCT
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
No connection
Data Input
Ground
Data Output Open Drain
Supply Voltage
2
4
Y
Function Table
Inputs Output
A Y
H Z
L L
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
2 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Page 3
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Absolute Maximum Ratings (Note 3)
Symbol Description Rating Unit
ESD HBM Human Body Model ESD Protection 2 KV
ESD MM Machine Model ESD Protection 200 V
VCC Supply Voltage Range -0.5 to 6.5 V
VI Input Voltage Range -0.5 to 6.5 V
Vo Voltage applied to output in high impedance or I
Vo Voltage applied to output in high or low state -0.3 to VCC +0.5 V
IIK Input Clamp Current VI<0 -50 mA
IOK Output Clamp Current -50 mA
IO Continuous output current ±50 mA
Continuous current through Vdd or GND ±100 mA
TJ Operating Junction Temperature -40 to 150 °C
NEW PRODUCT
T
Storage Temperature -65 to 150 °C
STG
Notes: 3. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
state -0.5 to 6.5 V
OFF
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
3 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Page 4
Recommended Operating Conditions (Note 4)
Symbol Parameter Min Max Unit
VCC Operating Voltage
V
High-level Input Voltage
IH
VIL Low-level input voltage
VI Input Voltage 0 5.5 V
NEW PRODUCT
VO Output Voltage 0 VCC V
IOL Low-level output current
Δt/ΔV
TA
Notes: 4. Unused inputs should be held at Vcc or Ground.
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
Input transition rise or fall
rate
Operating free-air
temperature
Operating 1.4 5.5 V
Data retention only 1.2 V
V
= 1.4 V to 1.95 V 0.65 X VCC
CC
VCC = 2.3 V to 2.7 V 1.7
VCC = 3 V to 3.6 V 2
VCC = 4.5 V to 5.5 V 0.7 X VCC
V
= 1.4 V to 1.95 V 0.35 X VCC
CC
VCC = 2.3 V to 2.7 V 0.7
VCC = 3 V to 3.6 V 0.8
VCC = 4.5 V to 5.5 V 0.3 X VCC
Vcc=1.4 V 3
VCC = 1.65 V 4
VCC = 2.3 V 8
VCC = 3 V
VCC = 4.5 V 32
V
= 1.4 V to 3.0 V 20
CC
VCC = 3.3 V ± 0.3 V 10
VCC = 5 V ± 0.5 V 5
4 of 13
www.diodes.com
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
V
V
16
24
-40 85 ºC
© Diodes Incorporated
mA
ns/V
December 2010
Page 5
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Electrical Characteristics (All typical values are at Vcc = 3.3V, T
Over recommended free-air temperature range (unless otherwi se noted)
Symbol Parameter Test Conditions Vcc Min Typ Max Unit
I
= 100 μA 1.4 V to 5.5 V 0.1
OL
IOL = 3 mA 1.4 V 0.4
IOL = 4 mA 1.65 V 0.45
VOL
Low Level
Output Voltage
IOL = 8 mA 2.3 V 0.3
IOL = 16 mA
IOL = 24 mA 0.55
IOL = 32 mA 4.5 V 0.55
II Input Current VI = 5.5 V or GND 0 to 5.5 V ± 5 μA
Z State
Leakage Current
Power Down Leakage
Current
VO = 5.5V 3.6 V
V
or VO = 5.5V
I
NEW PRODUCT
IOZ
I
OFF
ICC Supply Current VI = 5.5 V or GND IO=0 1.4 V to 5.5 V 10 μA
ΔICC
Additional Supply
Current
Input at V
–0.6 V
CC
3 V to 5.5 V 500 μA
CIi Input Capacitance VI = VCC or GND 3.3V 4 pF
CO Output Capacitance VO= VCC or GND 3.3V 5 pF
SOT25 (Note 5) 204
θ
Thermal Resistance
JA
Junction-to-Case
SOT353 (Note 5) 371
DFN1410 (Note 5) 430
SOT25 (Note 5) 52
θ
Thermal Resistance
JC
Junction-to-Case
SOT353 (Note 5) 143
DFN1410 (Note 5) 190
Notes: 5. Test condition for SOT25, SOT353, and DFN1410: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum
recommended pad layout.
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
5 of 13
www.diodes.com
= 25°C)
A
3 V
0 V
0.4
V
± 10 μA
± 10 μA
ºC/W
ºC/W
December 2010
© Diodes Incorporated
Page 6
Switching Characteristics
Over recommended free-air temperature range, CL = 15pF (see Figure 1)
Parameter
tpd A Y 1.5 9.9 1 5.8 0.8 4.4 0.8 3.4 0.8 3.1 ns
From
(Input)
Operating Characteristics
TA = 25 ºC
NEW PRODUCT
Parameter
Cpd
Power
dissipation
capacitance
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
TO
(OUTPUT)
Test
Conditions
f = 10 MHz 3 3 3 4 6 pF
Vcc = 1.5 V
± 0.1V
Min Max Min Max Min Max Min Max Min Max
Vcc = 1.5 V Vcc = 1.8 V Vcc = 2.5 V Vcc = 3.3 V Vcc = 5 V
TYP TYP TYP TYP TYP
Vcc = 1.8 V
± 0.15V
6 of 13
www.diodes.com
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Vcc = 2.5 V
± 0.2V
Vcc = 3.3 V
± 0.3V
Vcc = 5 V
± 0.5V
© Diodes Incorporated
Unit
Unit
December 2010
Page 7
Parameter Measurement Information
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
TEST Condition
t
(see Notes D and E)
PLZ
t
(see Notes D and F)
PZL
Vload
Vload
Vcc
Inputs
VM V
VI tr/tf
1.8V±0.15V VCC ≤2ns VCC/2 2 X VCC 30pF 1KΩ 0.15V
2.5V±0.2V VCC ≤2ns VCC/2 2 X VCC 30pF 500Ω 0.15V
3.3V±0.3V 3V ≤2.5ns 1.5V 6V 50pF 500Ω 0.3V
NEW PRODUCT
5V±0.5V VCC ≤2.5ns VCC/2 2 X VCC 50pF 500Ω 0.3V
Voltage Waveform
Pulse Duration
Figure 1. Load Circuit and Voltage Waveforms
Notes: A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz
C. The inputs are measured one at a time with one transition per measurement.
D. For the open drain device t
E. t
F. t
is measured at VM.
PZL
is measured at VOL +V
PLZ
and t
PLZ
∆
are the same as t
PZL
PD
CL RL
LOAD
Voltage Waveform
Propagation Delay Times
V∆
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
7 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Page 8
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Ordering Information
Device
74LVCE1G07W5-7 W5 SOT25 3000/Tape & Reel -7
74LVCE1G07SE-7 SE SOT353 3000/Tape & Reel -7
NEW PRODUCT
74LVCE1G07FZ4-7 FZ4 DFN1410 5000/Tape & Reel -7
Notes: 6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
Package
Code
Packaging
(Note 6)
Quantity Part Number Suffix
7” Tape and Reel
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
8 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Page 9
Marking Information
(1) SOT25 and SOT353
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
(Top View)
NEW PRODUCT
(3) DFN1410
W X
7
4
XX : Identification code
: Year 0~9
Y
: Week : A~Z : 1~26 week;
W
a~z : 27~52 week; z represents
52 and 53 week
X
: A~Z : Internal code
5
XX
Y
1 2 3
Part Number Package Identification Code
74LVCE1G07W5 SOT25 PN
74LVCE1G07SE SOT353 PN
(Top View)
: Identification Code
XX
Y : Year : 0~9
W
: Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
Y
XX
W X
52 and 53 week
: A~Z : Internal code
X
Part Number Package Identification Code
74LVCE1G07FZ4 DFN1410 PN
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
9 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Page 10
Package Outline Dimensions (All Dimensions in mm)
(1) Package Type: SOT25
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
NEW PRODUCT
(2) Package Type: SOT353
2.0/2.2
1.15/1.35
0.40/0.45
PIN 1
6x-0.42
C
L
0.10/0.30
C
L
0.65Bsc.
6x-0.60
Land Pattern Recommendation
1.3
2x-0.65
(unit:mm)
C
L
C
L
C
L
Top View
1.9
0.25/0.40
Detail"A"
Gauge Plane
0.25
8°
/
0°
0.9/1.0
1.10Max.
1.8/2.2
0/0.1
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
0.1/0.22
"A"
10 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Page 11
Package Outline Dimensions (Continued)
(3) Package Type: DFN1410
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
NEW PRODUCT
6x-
2X-
0.10 C
0.08 C
0.25
B
0.95/1.05
B
0.40Max.
A
0.25
2X-
(Pin #1 ID)
x
1
.
0
C
Side View
1.35/1.45
0.50Typ.
X
¢
5
4
0.10(4x)
0.13Typ.
0/0.05
C
A
6x-0.25/0.35
0.075¡ Ó0.030
6x-0.15/0.25
Seating Plane
6x-0.25
0.550
4x-0.50Typ.
Land Pattern Recommendation
(mm)
6x-0.35
Top View
C
0.10
AB
Bottom View
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
11 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Page 12
Taping Orientation (Note 7)
For DFN1410
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
NEW PRODUCT
Notes: 7. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
12 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Page 13
74LVCE1G07
SINGLE BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
NEW PRODUCT
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes In corporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this documen t or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support dev ices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
74LVCE1G07
Document number: DS32275 Rev. 2 - 2
13 of 13
www.diodes.com
December 2010
© Diodes Incorporated
Loading...