Diodes 74LV04A User Manual

74LV04A

HEX INVERTERS

Description

The 74LV04A provides provides six independent inverters with

standard push-pull outputs. The device is designed for operation with

a power supply range of 2.0V to 5.5V.

The inputs are tolerant to 5.5V allowing this device to be used in a

mixed voltage environment. The device is fully specified for partial

power down applications using I

output preventing damaging current backflow when the device is

powered down.

The gates perform the Boolean function:

OFF

. The I

AY 

circuitry disables the

OFF

Pin Assignments

Features

 Wide Supply Voltage Range from 2.0V to 5.5V

NEW PRODUCT

 Sinks or sources 12mA at V

 CMOS low power consumption

 I

 Inputs or Outputs accept up to 5.5V

 Inputs can be driven by 3.3V or 5V allowing for voltage

 Schmitt Trigger Action at All Inputs

 ESD Protection Tested per JESD 22

 Latch-Up Exceeds 100mA per JESD 78, Class I

 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

 Halogen and Antimony Free. “Green” Device (Note 3)

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

Supports Partial -Power Down Operation

OFF

translation applications.

 Exceeds 200-V Machine Model (A115)

 Exceeds 2000-V Human Body Model (A114)

 Exceeds 1000-V Charged Device Model (C101)

74LV04A

Document number: DS35658 Rev. 1 - 2

= 4.5V

CC

Click here for ordering information, located at the end of datasheet

www.diodes.com

Applications

 General Purpose Logic

 Power Down Signal Isolation

 Wide array of products such as:

 PCs, networking, notebooks, ultrabooks, netbooks

 Computer peripherals, hard drives, CD/DVD ROM

 TV, DVD, DVR, set top box

1 of 9

October 2013

74LV04A

Pin Descriptions

Logic Diagram

Pin Number Pin Name Description

1 1A Data Input 2 1Y Data Output 3 2A Data Input 4 2Y Data Output 5 3A Data Input 6 3Y Data Output 7 GND Ground 8 4Y Data Output

9 4A Data Input 10 5Y Data Output 11 5A Data Input 12 6Y Data Output 13 6A Data Input

NEW PRODUCT

14 Vcc Supply Voltage

Function Table

Input Output

A Y

H L

Absolute Maximum Ratings (Note 4) (@T

Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values.

74LV04A

Document number: DS35658 Rev. 1 - 2

L H

= +25°C, unless otherwise specified.)

A

Symbol Parameter Rating Unit

ESD HBM Human Body Model ESD Protection 2 kV

ESD CDM Charged Device Model ESD Protection 1 kV

ESD MM Machine Model ESD Protection 200 V

VCC

VI

IIK Input Clamp Current VI< 0V

IOK Output Clamp Current VO<-0V

IO Continuous Output Current - 0.5V < VO Vcc + 0.5V

ICC

I

GND

TJ

T

STG

P

TOT

Supply Voltage Range -0.5 to +7.0 V

Input Voltage Range (Note 4) -0.5 to +7.0 V

Continuous Current Through Vcc 50 mA

Continuous Current Through GND -50 mA

Operating Junction Temperature -40 to +150 °C

Storage Temperature -65 to +150 °C

Total Power Dissipation 500 mW

www.diodes.com

-20 mA

-50 mA

±25 mA

2 of 9

October 2013

74LV04A

Recommended Operating Conditions (Note 5) (@T

Symbol Parameter Conditions Min Max Unit

VCC

VI

VO

IOH

IOL

Δt/ΔV

TA

NEW PRODUCT

Note: 5. Unused inputs should be held at VCC or Ground.

Supply Voltage

Input Voltage 0 5.5 V

Output Voltage 0

High-Level Output Current

Low-Level Output Current

Input Transition Rise or Fall Rate

Operating Free-Air Temperature

Electrical Characteristics (@T

2.0V -50 mA

2.3V to 2.7V -2 μA

3.0V to 3.6V -6 mA

4.5V to 5.5V -12 mA

2.0V 50 μA

2.3V to 2.7V 2 mA

3.0V to 3.6V 6 mA

4.5V to 5.5V 12 mA

2.3V to 2.7V 200

3.0V to 3.6V 100

4.5V to 5.5V 20

= +25°C, unless otherwise specified.)

A

= +25°C, unless otherwise specified.)

A

2.0 5.5 V

-40 125 ºC

VCC

V

ns/V

Symbol Parameter Test Conditions Vcc

2.0V 1.5 1.5

High-Level Input

VIH

Voltage

2.3V to 2.7V

3.0V to 3.6V

4.5V to 5.5V

2.0V 0.5 0.5

VIL

Low-Level Input Voltage

2.3V to 2.7V

3.0V to 3.6V

4.5V to 5.5V

2.0V to 5.5V

2.3V 2.0 2.0

3.0V 2.48 2.48

4.5V 3.8 3.8

2.0V to 5.5V 0.1 0.1

2.3V 0.4 0.4

3.0V 0.44 0.44

4.5V 0.55 0.55

0V 5 5 μA

0 to 5.5V ±1 ±1 μA

5.5V 20 20 μA

VOH

VOL

I

OFF

II

ICC

High-Level Output Voltage

Low-Level Output Voltage

Power Down Leakage Current

Input Current

Supply Current

= -50μA

I

OH

IOH = -2mA

IOH = -6mA

IOH = -12mA

= 50μA

I

OL

IOL = 2mA

IOL = 6mA

IOL = 12mA

VI or VO = 0 to 5.5V

VI =GND or 5.5V

= GND or VCC

V

I

=0

O

74LV04A

Document number: DS35658 Rev. 1 - 2

www.diodes.com

= -40°C to +85°C TA = -40°C to +125°C

T

A

Min Max Min Max

V

CC

X 0.3

VCC X 0.7

VCC-0.1

VCC X 0.3

V

X 0.7

CC

V

X 0.7

CC

V

X 0.7

CC

VCC-0.1

3 of 9

Unit

V

October 2013

Switching Characteristics

74LV04A

Symbol Parameter

tPD

Propagation

Delay A

N

to YN

Conditions

Figure 1

C

L

Figure 1

C

L

Operating Characteristics (@T

Parameter

NEW PRODUCT

Cpd

Power Dissipation

Capacitance per Gate

Noise Characteristics

VCC = 3V, CL = 50pF TA = +25°C

Symbol Parameter Min Typ Max Unit

V

Quiet output, maximum dynamic VOL

OL(p)

V

Quiet output, minimum dynamic VOL

OL(V)

V

Quiet output, minimum dynamic VOH

OH(V)

V

IH(D)

V

IL(D)

High Level dynamic input voltage 2.31

Low Level dynamic input voltage —

Package Characterisitics

Test

= 15pF

= 50 pF

= +25°C

T

V

CC

2.5V ± 0.2V — 7.1 11.7 1 14 1 14

3.3V ± 0.3V

5.0V ± 0.5V

2.5V ± 0.2V

3.3V ± 0.3V

5.0V ± 0.5V

= +25°C, unless otherwise specified.)

A

Test

Conditions

F = 10 MHz

C

= 50pF

L

A

Min Typ Max

—

V

CC

3.3V 9.6

5.0V 11.4

5.1 7.1 1 8.5 1 8.5

3.6 5.5 1 6.5 1 6.5

10 15.5 1 18 1 18

7.3 10.6

5.1 7.5 1 8.5 1 8.5

—

— -0.1 -0.8

— 3.1 —

Typ Unit

0.2 0.8 V

— —

—

-40°C to +85 °C -40°C to +125°C

Min Max Min Max

1 12 1 12

pF

V

0.99

V

Unit

ns

Symbol Parameter Test Conditions

Ci

Input Capacitance

Vi = V

74LV04A

Document number: DS35658 Rev. 1 - 2

– or GND

CC

www.diodes.com

V

CC

2.0 to 5.5V 3.3 10 pF

4 of 9

Min Typ Max Unit

October 2013

Parameter Measurement Information

74LV04A

V

CC

2.0V to 5.5V

NEW PRODUCT

Voltage Waveform

Pulse Duration

Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10MHz. C. Inputs are measured separately one transition per measurement.

D. t

PLH

and t

are the same as t

PHL

V

74LV04A

Document number: DS35658 Rev. 1 - 2

Inputs

VI t

CC

PD

Figure 1 Load Circuit and Voltage Waveforms

r/tf

<3ns

www.diodes.com

5 of 9

VM C

VCC/2

Voltage Waveform

Propagation Delay Times

Inverting and Non Inverting Outputs

L

15pF or 50pF

October 2013

Ordering Information

74LV04A

Device Package Code

74LV04AS14-13 S14 SO-14 2500/Tape & Reel -13

74LV04AT14-13 T14 TSSOP-14 2500/Tape & Reel -13

Note: 6. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf

NEW PRODUCT

Packaging

(Note 6)

Quantity Part Number Suffix

Marking Information

(1) SO14, TSSOP14

Part Number Package

74LV04AS14 SO-14

74LV04AT14 TSSOP-14

74LV04A

Document number: DS35658 Rev. 1 - 2

www.diodes.com

6 of 9

13” Tape and Reel

October 2013

Package Outline Dimensions (All dimensions in mm.)

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.

Package Type: SO-14

Gauge Plane



7

°

(

B

NEW PRODUCT

Package Type: TSSOP-14

H

E

D

4

x

)

e

A2

A1

A

L

Detail “A”

Pin# 1 Indent

B

L

G

K

A

a

1

D

C

F1

F

Detail ‘A’

5 2

.

0

2

a

Gauge Plane Seating Plane

Detail ‘A’

74LV04A

Document number: DS35658 Rev. 1 - 2

7 of 9

www.diodes.com

SO-14

Dim Min Max

A 1.47 1.73 A1 0.10 0.25 A2 1.45 Typ

B 0.33 0.51

D 8.53 8.74

E 3.80 3.99

e 1.27 Typ

H 5.80 6.20

L 0.38 1.27

0 8



All Dimensions in mm

TSSOP-14

Dim Min Max

a1 7° (4X) a2

0

A 4.9 5.10 B 4.30 4.50 C



D 0.8 1.05

F 1.00 Typ

F1 0.45 0.75

G 0.65 Typ K 0.19 0.30

L 6.40 Typ

All Dimensions in mm

8°

1.2

74LV04A

October 2013

Suggested Pad Layout

Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.

Package Type: SO-14

X

C2

C1

Y

NEW PRODUCT

Package Type: TSSOP-14

X

C2

Y

C1

74LV04A

Document number: DS35658 Rev. 1 - 2

8 of 9

www.diodes.com

Dimensions Value (in mm)

X 0.60

Y 1.50 C1 5.4 C2 1.27

Dimensions Value (in mm)

X 0.45

Y 1.45 C1 5.9 C2 0.65

74LV04A

October 2013

74LV04A

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.

NEW PRODUCT

This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated.

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.

www.diodes.com

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

IMPORTANT NOTICE

LIFE SUPPORT

74LV04A

Document number: DS35658 Rev. 1 - 2

9 of 9

www.diodes.com

October 2013