Diodes 74AUP1G14 User Manual
74AUP1G14
SINGLE SCHMITT-TRIGGER INVERETER
Description
The Advanced Ultra Low Power (AUP) CMOS logic family is
designed for low power and extended battery life in portable
applications.
The AUP1G14 is a single 1-input Schmitt-trigger inverter gate with
a standard push-pull output designed for operation over a power
supply range of 0.8V to 3.6V. The device is fully specified for
partial power down applications using I
disables the output preventing damaging current backflow when
the device is powered down.
The gate performs the positive Boolean function:
OFF
. The I
circuitry
OFF
AY
Features
Advanced Ultra Low Power (AUP) CMOS
Supply Voltage Range from 0.8V to 3.6V
±4mA Output Drive at 3.0V
Low Static power consumption
< 0.9µA
I
CC
Low Dynamic Power Consumption
C
= 6.2pF (Typical at 3.6V)
PD
Schmitt Trigger Action at All Inputs Make the Circuit
Tolerant for Slower Input Rise and Fall Time. The hysteresis
is typically 250mV at Vcc = 3.0V
I
ESD Protection Exceeds JESD 22
Latch-Up Exceeds 100mA per JESD 78, Class II
Leadless packages named per JESD30E
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
74AUP1G14
Document number: DS35152 Rev. 2 - 2
Supports Partial-Power-Down Mode Operation
OFF
2000-V Human Body Model (A114-A)
Exceeds 1000-V Charged Device Model (C101C)
Click here for ordering information, located at the end of datasheet
Pin Assignments
Applications
Suited for battery and low power needs
Wide array of products such as:
Tablets, E-readers
Cell Phones, Personal Navigation / GPS
MP3 players ,Cameras, Video Recorders
PCs ultrabooks, notebooks, netbooks,
Computer peripherals, hard drives, CD/DVD ROM
TV, DVD, DVR, set top box
1 of 14
www.diodes.com
Future Product
Future Product
© Diodes Incorporated
July 2013
Pin Descriptions
Pin Name Function
NC No Connection
A Data Input
GND Ground
Y Data Output
V
CC
Supply Voltage
Logic Diagram
74AUP1G14
Function Table
Inputs Output
A Y
H L
L H
74AUP1G14
Document number: DS35152 Rev. 2 - 2
2 of 14
www.diodes.com
July 2013
© Diodes Incorporated
74AUP1G14
Absolute Maximum Ratings (Note 4) (@T
Symbol Parameter Rating Unit
ESD HBM Human Body Model ESD Protection 2 kV
ESD CDM Charged Device Model ESD Protection 1 kV
VCC
VI
Vo
IIK Input Clamp Current VI < 0
IOK Output Clamp Current (VO < 0 )
IO Continuous Output Current (VO = 0 to VCC)
ICC Continuous Current Through VCC
I
GND
TJ
T
STG
Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should
be within recommend values.
Supply Voltage Range -0.5 to +4.6 V
Input Voltage Range -0.5 to +4.6 V
Voltage applied to output in high or low state
Continuous Current Through GND -50 mA
Operating Junction Temperature -40 to +150 °C
Storage Temperature -65 to 1+50 °C
Recommended Operating Conditions (Note 5) (@T
Symbol Parameter Min Max Unit
VCC
VI
VO
IOH
IOL
TA
Note: 5. Unused inputs should be held at VCC or Ground.
Operating Voltage
Input Voltage 0 3.6 V
Output Voltage 0
High-Level Output Current
Low-Level Output Current
Operating Free-Air Temperature
V
VCC = 1.1V
VCC = 1.4V
VCC = 1.65V
VCC = 2.3V
VCC = 3.0V
V
VCC = 1.1V
VCC = 1.4V
VCC = 1.65V
VCC = 2.3V
VCC = 3.0V
= +25°C, unless otherwise specified.)
A
= +25°C, unless otherwise specified.)
A
= 0.8V
CC
= 0.8V
CC
-0.5 to VCC +0.5
50 mA
50 mA
±20 mA
50 mA
0.8 3.6 V
VCC
-20 µA
-1.1
-1.7
-1.9
-3.1
-4
20 uA
1.1
1.7
1.9
3.1
4
-40 125 °C
V
V
mA
mA
74AUP1G14
Document number: DS35152 Rev. 2 - 2
3 of 14
www.diodes.com
July 2013
© Diodes Incorporated
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
74AUP1G14
Symbol Parameter Test Conditions
0.8V 0.4 0.65 0.4 0.65
Positive-going
input threshold
VT+
voltage
0.8V 0.15 0.4 0.15 0.4
Negative-going
input threshold
VT-
voltage
0.8V 0.07 0.5 0.07 0.5
Hysteresis
ΔVT
(V
T+ - VT-)
= -20μA
I
OH
IOH = -1.1mA
IOH = -1.7mA
High-Level Output
VOH
Voltage
IOH = -1.9mA
IOH = -2.3mA
IOH = -3.1mA
IOH = -2.7mA
IOH = -4mA
= 20μA
I
OL
IOL = 1.1mA
IOL = 1.7mA
Low-Level Output
VOL
Voltage
IOL = 1.9mA
IOL = 2.3mA
IOL = 3.1mA
IOL = 2.7mA
IOL = 4 mA
Input Current
II
Power Down
I
OFF
Leakage Current
Delta Power Down
ΔI
OFF
Leakage Current
Supply Current
ICC
Additional Supply
ΔICC
Current
VI = GND to 3.6V
or VO = 0V to 3.6V
V
I
or VO = 0V to 3.6V
V
I
VI = GND or VCC, IO = 0
Input at V
–0.6V
CC
74AUP1G14
Document number: DS35152 Rev. 2 - 2
T
= +25°C TA = -40°C to +85°C
V
CC
A
Min Max Min Max
1.1V 0.53 0.9 0.53 0.9
1.4V 0.74 1.11 0.74 1.11
1.65V 0.91 1.29 0.91 1.29
2.3V 1.37 1.77 1.37 1.77
3.0V 1.61 2.32 1.61 2.32
1.1V 0.26 0.65 0.26 0.65
1.4V 0.39 0.75 0.39 0.75
1.65V 0.47 0.84 0.47 0.84
2.3V 0.69 1.04 0.69 1.04
3.0V 0.88 1.24 0.88 1.24
1.1V 0.08 0.46 0.08 0.46
1.4V 0.18 0.56 0.18 0.56
1.65V 0.27 0.66 0.27 0.66
2.3V 0.53 0.92 0.53 0.92
3.0V 0.79 1.31 0.79 1.31
0.8V to 3.6 V
1.1V
V
– 0.1
CC
0.75 X VCC
V
– 0.1
CC
0.7 X VCC
1.4V 1.11 1.03
1.65V 1.32 1.30
2.3V
3V
2.05 1.97
1.9
1.85
2.72 2.67
2.6 2.55
0.8V to 3.6V 0.1 0.1
1.1V
0.3 X VCC
0.3 X VCC
1.4V 0.31 0.37
1.65V 0.31 0.35
2.3V
3V
0.31 0.33
0.44 0.45
0.31 0.33
0.44 0.45
0V to 3.6V ± 0.1 ± 0.5 μA
0 ± 0.2 0.6 μA
0V to 0.2V ± 0.2 0.6 μA
0.8V to 3.6V 0.5
0.9
3.3V 40 50 μA
4 of 14
www.diodes.com
July 2013
© Diodes Incorporated
Unit
V
V
V
V
V
μA
Electrical Characteristics (cont.) (@T
= +25°C, unless otherwise specified.)
A
74AUP1G14
Symbol Parameter Test Conditions
0.8V 0.4 0.65
Positive-going
input threshold
VT+
voltage
0.8V 0.15 0.4
Negative-going
input threshold
VT-
voltage
0.8V 0.07 0.5
Hysteresis
ΔVT
(V
T+ - VT-)
= -20μA
I
OH
IOH = -1.1mA
IOH = -1.7mA
VOH
High-Level
Output Voltage
IOH = -1.9mA
IOH = -2.3mA
IOH = -3.1mA
IOH = -2.7mA
IOH = -4mA
= 20μA
I
OL
IOL = 1.1mA
IOL = 1.7mA
Low-Level Output
VOL
Voltage
IOL = 1.9mA
IOL = 2.3mA
IOL = 3.1mA
IOL = 2.7mA
IOL = 4mA
Input Current
II
I
OFF
ΔI
OFF
ICC
ΔICC
Power Down
Leakage Current
Delta Power
Down Leakage
Current
Supply Current
Additional Supply
Current
VI = GND to 3.6V
or VO = 0V to 3.6V
V
I
or VO = 0V to 3.6V
V
I
VI = GND or VCC, IO = 0
Input at V
-0.6V
CC
74AUP1G14
Document number: DS35152 Rev. 2 - 2
T
= -40 to +125 oC
V
CC
A
Min Max
Unit
1.1V 0.53 0.9
1.4V 0.74 1.11
1.65V 0.91 1.29
V
2.3V 1.37 1.77
3.0V 1.61 2.32
1.1V 0.26 0.65
1.4V 0.39 0.75
1.65V 0.47 0.84
V
2.3V 0.69 1.04
3.0V 0.88 1.24
1.1V 0.08 0.46
1.4V 0.18 0.56
1.65V 0.27 0.66
V
2.3V 0.53 0.92
3.0V 0.79 1.31
0.8V to 3.6V
1.1V
V
– 0.11
CC
0.6 X VCC
1.4V 0.93
1.65V 1.17
2.3V
3V
1.77
1.67
2.40
2.30
V
0.8V to 3.6V 0.11
1.1V
0.33 X VCC
1.4V 0.41
1.65V 0.39
2.3V
3V
0.36
0.50
0.36
0.50
V
0V to 3.6V ± 0.75 μA
0 ± 3.5 μA
0V to 0.2V ± 2.5 μA
0.8V to 3.6V 3.0 μA
3.3V 75 μA
5 of 14
www.diodes.com
© Diodes Incorporated
July 2013
Loading...