Diodes 74AHC1G125 User Manual
74AHC1G125
SINGLE BUFFER GATE WITH 3-STATE OUTPUT
Description
The 74AHC1G125 is a single non-inverting buffer/bus driver
with a 3-state output. The output enters a high impedance
state when a HIGH-level is applied to the output enable (OE)
pin. The device is designed for operation with a power
supply range of 2.0V to 5.5V.
Features
NEW PRODUCT
• Supply Voltage Range from 2.0V to 5.5V
• ± 8 mA Output Drive at 5.0V
• CMOS low power consumption
• Schmitt Trigger Action at All Inputs Make the Circuit
Tolerant for Slower Input Rise and Fall Time.
• ESD Protection per JESD 22
o Exceeds 200-V Machine Model (A115-A)
o Exceeds 2000-V Human Body Model (A114-A)
o Exceeds 1000-V Charged Device Model (C101C)
• Latch-Up Exceeds 100mA per JESD 78, Class II
• SOT25 and SOT353: Assembled with “Green” Molding
Compound (no Br, Sb)
• Lead Free Finish / RoHS Compliant (Note 1)
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
Pin Assignments
Applications
• General Purpose Logic
• Wide array of products such as:
o PCs, networking, notebooks, netbooks, PDAs
o Computer peripherals, hard drives, CD/DVD ROM
o TV, DVD, DVR, set top box
o Phones, Personal Navigation / GPS
o MP3 players ,Cameras, Video Recorders
OE
A
GND
(Top View)
1
2
SOT25 / SOT353
Vcc
5
Y
43
74AHC1G125
Document number: DS35176 Rev. 1 - 2
1 of 9
www.diodes.com
March 2011
© Diodes Incorporated
Pin Descriptions
Pin Name Pin No. Description
OE
A 2 Data Input
GND 3 Ground
Y 4 Data Output
Vcc 5 Supply Voltage
Logic Diagram
OE
A
NEW PRODUCT
SINGLE BUFFER GATE WITH 3-STATE OUTPUT
1
2 4
1 Output Enable
Y
74AHC1G125
Function Table
Inputs Output
OE
L H H
L L L
H X Z
A Y
74AHC1G125
Document number: DS35176 Rev. 1 - 2
2 of 9
www.diodes.com
March 2011
© Diodes Incorporated
74AHC1G125
SINGLE BUFFER GATE WITH 3-STATE OUTPUT
Absolute Maximum Ratings (Note 2)
Symbol Description Rating Unit
ESD HBM Human Body Model ESD Protection 2 KV
ESD CDM Charged Device Model ESD Protection 1 KV
ESD MM Machine Model ESD Protection 200 V
VCC
VI
VO
IIK Input Clamp Current VI<0
IOK Output Clamp Current (VO < 0 or VO > VCC)
IO Continuo us output current (VO = 0 to VCC)
ICC Continuous current through VCC
I
GND
TJ
T
STG
Notes: 2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be
within recommend values.
NEW PRODUCT
Supply Voltage Range -0.5 to 6.5 V
Input Voltage Range -0.5 to 6.5 V
Voltage applied to output in high or low state
Continuous current through GND -50 mA
Operating Junction Temperature -40 to 150 °C
Storage Temperature -65 to 150 °C
-0.5 to VCC +0.5
-20 mA
±20 mA
±25 mA
50 mA
V
Recommended Operating Conditions (Note 3)
Symbol Parameter Min Max Unit
VCC
V
VIL
VI
VO
IOH
IOL
Δt/ΔV
TA
Notes: 3. Unused inputs should be held at VCC or Ground.
Operating Voltage
High-level Input Voltage
IH
Low-level input voltage
Input Voltage 0 5.5 V
Output Voltage 0
High-level output current
Low-level output current
Input transition rise or fall
rate
Operating free-air
temperature
= 2V
V
CC
VCC = 3V
VCC = 5.5V
V
= 2V
CC
VCC = 3V
VCC = 5.5V
= 2V
V
CC
VCC = 3.3V ± 0.3V
VCC = 5V ± 0.5V
= 2V
V
CC
VCC = 5V ± 0.5V
VCC = 3V
VCC = 3.3V ± 0.3V
VCC = 5V ± 0.5V
2 5.5 V
1.5
2.1
3.85
0.5
0.9
1.65
VCC
-50 uA
-4
-8
50 uA
4
8
100
20
-40 125 ºC
74AHC1G125
Document number: DS35176 Rev. 1 - 2
3 of 9
www.diodes.com
March 2011
© Diodes Incorporated
V
V
V
mA
mA
ns/V
Loading...