Diodes 74AHC1G09 User Manual

A

74AHC1G09

SINGLE 2 INPUT POSITIVE AND GATE WITH OPEN DRAIN OUTPUT

Description

The 74AHC1G09 is a single 2-input positive AND gate with an open

drain output. The device is designed for operation with a power

supply range of 2.0V to 5.5V. The open-drain output can be

connected to other open drain outputs to implement active-low wired-

OR or active-high wired-AND functions. The gate performs the

positive Boolean function:

Y 

A pull-up resistor is required to achieve a high output state.

B

or B

Y 

Features

 Supply Voltage Range from 2.0V to 5.5V

 8mA sink current at 5.0 V

NEW PRODUCT

 CMOS low power consumption

 Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for

Slower Input Rise and Fall Time.

 ESD Protection per JESD 22

 Exceeds 200-V Machine Model (A115-A)

 Exceeds 2000-V Human Body Model (A114-A)

 Exceeds 1000-V Charged Device Model (C101C)

 Latch-Up Exceeds 100mA per JESD 78, Class II

 SOT25 and SOT353: Assembled with “Green” Molding

Compound (no Br, Sb)

 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

 Halogen and Antimony Free. “Green” Device (Note 3)

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

Pin Assignments

1

A

2

B

GND

SOT25 / SOT353

Applications

 General Purpose Logic

 Wide array of products such as:

 PCs, networking, notebooks, netbooks, PDAs

 Computer peripherals, hard drives, CD/DVD ROM

 TV, DVD, DVR, set top box

 Personal Navigation / GPS

 MP3 players ,Cameras, Video Recorders

(Top View)

Vcc

5

Y

43

Pin Descriptions

Pin Name Pin NO. Function

A 1 Data Input

B 2 Data Input

GND 3 Ground

Y 4 Data Output

VCC

74AHC1G09

Document number: DS35735 Rev. 2 - 2

5

Supply Voltage

1 of 9

www.diodes.com

March 2013

Y

74AHC1G09

Logic Diagram

A

B

1

2

4



Functional Table

Inputs Output

A B Y

H H Z

L X L

NEW PRODUCT

Absolute Maximum Ratings (Note 4) (@T

X L L

= +25°C, unless otherwise specified.)

A

Symbol Parameter Rating Unit

ESD HBM Human Body Model ESD Protection 2 KV

ESD CDM Charged Device Model ESD Protection 1 KV

ESD MM Machine Model ESD Protection 200 V

VCC

VI

VO

IIK Input Clamp Current VI < 0

IOK Output Clamp Current (VO < 0 or VO > VCC)

IO Continuous output current (VO = 0 to VCC)

ICC Continuous current through VCC

I

GND

TJ

T

STG

Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values.

74AHC1G09

Document number: DS35735 Rev. 2 - 2

Supply Voltage Range -0.5 to 6.5 V

Input Voltage Range -0.5 to 6.5 V

Voltage applied to output in high or low state

Continuous current through GND -50 mA

Operating Junction Temperature -40 to +150 °C

Storage Temperature -65 to +150 °C

2 of 9

www.diodes.com

-0.5 to VCC +0.5

-20 mA

±20 mA

±25 mA

50 mA

V

March 2013

Recommended Operating Conditions (Note 5) (@T

= +25°C, unless otherwise specified.)

A

Symbol Parameter Min Max Unit

VCC

V

VIL

VI

VO

IOL

NEW PRODUCT

Δt/ΔV Input transition rise or fall rate

TA

Note: 5. Unused inputs should be held at VCC or Ground.

Operating Voltage

High-Level Input Voltage

IH

Low-Level input Voltage

Input Voltage 0 5.5 V

Output Voltage 0 5.5 V

Low-Level Output Current

Operating free-air temperature

= 2V

V

CC

VCC = 3V

VCC = 5.5V

= 2V

V

CC

VCC = 3V

VCC = 5.5V

= 2V

V

CC

VCC = 5V ± 0.5V

VCC = 3V

= 3.3V ± 0.3V

V

CC

VCC = 5V ± 0.5V

2.0 5.5 V

1.5

2.1

3.85

0.5

0.9

1.65

50 uA

4

8

100

20

-40 +125 °C

Electrical Characteristics (@T

= +25°C, unless otherwise specified.)

A

Symbol Parameter Test Conditions

V

CC

+25°C -40°C to +85°C -40°C to +125°C

Min Typ Max Min Max Min Max

2V 0.1 0.1 0.1

High-level Input

VOL

Voltage

Input Current

II

Z-state Output

Ioz

Current

Supply Current

ICC

Input Capacitance

Ci

Thermal Resistance

θJA

Junction-toAmbient

Thermal Resistance

θJC

Junction-to-Case

I

= 50μA

OL

IOL = 4mA

IOL = 8mA

VI = 5.5V or GND

= 5.5V or GND

V

I

= 5.5V or GND

V

I

=0

O

Vi = V

– or GND

CC

SOT25

SOT353 371

SOT25

SOT353 143

3V 0.1 0.1 0.1

4.5V 0.1 0.1 0.1

3V 0.36 0.44

4.5V

0 to 5.5V

5.5V

0.36 0.44

±0.1 ±1

±0.25 ±2.5

1 10

5.5V 2.0 10 10 10 pF

204

(Note 6)

52

(Note 6)

Note: 6. Test conditions for SOT25, and SOT353: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.

74AHC1G09

Document number: DS35735 Rev. 2 - 2

3 of 9

www.diodes.com

74AHC1G09

V

mA

ns/V

0.55

±2 μA

±10 μA

40 μA

°C/W

March 2013

Unit

V

Switching Characteristics

VCC = 3.3V ±0.3 (see Figure 1)

Parameter

tpd

From

(Input)

A or B Y

TO

(OUTPUT)

C

L

CL = 50pF

VCC = 5V ±0.5V (see Figure 1)

NEW PRODUCT

Parameter

tpd

From

(Input)

A or B Y

TO

(OUTPUT)

C

L

CL = 50pF

Operating Characteristics

TA = +25°C

Parameter

Cpd

Power dissipation capacitance

Parameter Measurement Information

From Output

Under Test

CL

(see Note A)

74AHC1G09

+25°C -40°C to +85°C -40°C to +125°C

Min Typ Max Min Max Min Max

= 15pF

+25°C -40°C to +85°C -40°C to +125°C

= 15pF

RL

0.6 4.6 7.5

0.6 6.5 11.0

Min Typ Max Min Max Min Max

0.6 3.2 5.5

0.6 4.6 7.5

Test

Conditions

f = 1 MHz

No Load

V

LOAD

0.6 8.5

0.6 12.0

0.6 6.5

0.6 8.0

TEST Condition

t

(see Notes D and E)

PLZ

t

(see Notes D and F)

PZL

0.6 9.0

0.6 12.5

0.6 7.0

0.6 8.5

= 5V

V

CC

Typ

5 pF

V V

LOAD

Unit

ns

Unit

ns

Unit

V

CC

3.3V ±0.3V

5V ±0.5V

VI t

V

CC

V

CC

V

CC

V

CC

74AHC1G09

Document number: DS35735 Rev. 2 - 2

Inputs

r/tf

≤3ns

VM V

VCC/2 VCC

4 of 9

www.diodes.com

C

LOAD

R

L

15pF 1KΩ 0.3V

50pF 1KΩ 0.3V

15pF 1KΩ 0.3V

50pF 1KΩ 0.3V

L

V∆

March 2013

Parameter Measurement Information (cont.)

74AHC1G09

Voltage Waveform Pulse Duration

NEW PRODUCT

Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 1 MHz. C. The inputs are measured one at a time with one transition per measurement. D. For the open drain device t

E. t F. t

is measured at VM.

PZL

is measured at VOL +V

PLZ

74AHC1G09

Document number: DS35735 Rev. 2 - 2

Figure 1 Load Circuit and Voltage Waveforms

PLZ

∆

and t

are the same as t

PZL

.

PD

5 of 9

www.diodes.com

Voltage Waveform

Propagation Delay Times

March 2013

Ordering Information

74AHC1G09

Part Number Package Code Packaging

NEW PRODUCT

74AHC1G09W5-7 W5 SOT25 3000/Tape & Reel -7

74AHC1G09SE-7 SE SOT353 3000/Tape & Reel -7

Marking Information

74AHC1G09

Document number: DS35735 Rev. 2 - 2

7” Tape and Reel

Quantity Part Number Suffix

(Top View)

5

7

4

XX : Identification code

Y

: Year 0~9

W X

Y

XX

: Week : A~Z : 1~26 week;

W

a~z : 27~52 week; z represents 52 and 53 week

X

1 2 3

Part Number Package Identification Code

74AHC1G09W5 SOT25 YN

74AHC1G09SE SOT353 YN

: A~Z : Internal code

6 of 9

www.diodes.com

March 2013

Package Outline Dimensions (All dimensions in mm.)

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.

(1) Package Type: SOT25

NEW PRODUCT

(2) Package Type: SOT353

K

J

K

J

74AHC1G09

Document number: DS35735 Rev. 2 - 2

A

B C

H

N

D

L

M

A

B C

H

M

D

L

F

7 of 9

www.diodes.com

Dim Min Max Typ

Dim Min Max

All Dimensions in mm

SOT25

A 0.35 0.50 0.38 B 1.50 1.70 1.60 C 2.70 3.00 2.80 D

 

H 2.90 3.10 3.00

J 0.013 0.10 0.05

K 1.00 1.30 1.10

L 0.35 0.55 0.40 M 0.10 0.20 0.15 N 0.70 0.80 0.75

0° 8°



All Dimensions in mm

SOT353

A 0.10 0.30

B 1.15 1.35

C 2.00 2.20

D 0.65 Typ

F 0.40 0.45

H 1.80 2.20

J 0 0.10

K 0.90 1.00

L 0.25 0.40

M 0.10 0.22



0° 8°

0.95



74AHC1G09

March 2013

Suggested Pad Layout

Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.

(1) Package Type: SOT25

NEW PRODUCT

G

Z

Y

X

C2C2

C1

(2) Package Type: SOT353

C2C2

G

Z

Y

X

C1

Dimensions Value (in mm)

Z G X Y

C1 2.40

C2

Dimensions Value (in mm)

Z 2.5 G 1.3 X 0.42 Y 0.6

C1 1.9 C2 0.65

3.20

1.60

0.55

0.80

0.95

74AHC1G09

Document number: DS35735 Rev. 2 - 2

8 of 9

www.diodes.com

March 2013

74AHC1G09

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.

NEW PRODUCT

This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated.

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.

www.diodes.com

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

IMPORTANT NOTICE

LIFE SUPPORT

74AHC1G09

Document number: DS35735 Rev. 2 - 2

9 of 9

www.diodes.com

March 2013