Features
Green
3.0SMCJ5.0A /14A /20A /22A /24A /28A /30A /58A
3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Mechanical Data
• 3000W Peak Pulse Power Dissipation
• Glass Passivated Die Construction
• Excellent Clamping Capability
• Fast Response Time
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Case: SMC
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Solderable per MIL-STD-202, Method 208
• Lead Free Plating (Matte Tin Finish).
• Polarity Indicator: Cathode Band
• Weight: 0.21 grams (approximate)
Top View
Bottom View
Ordering Information (Note 4)
Part Number Case Packaging
3.0SMCJ5.0A-13 SMC 3000/Tape & Reel
3.0SMCJ14A-13 SMC 3000/Tape & Reel
3.0SMCJ20A-13 SMC 3000/Tape & Reel
3.0SMCJ22A-13 SMC 3000/Tape & Reel
3.0SMCJ24A-13 SMC 3000/Tape & Reel
3.0SMCJ28A-13 SMC 3000/Tape & Reel
3.0SMCJ30A-13 SMC 3000/Tape & Reel
3.0SMCJ58A-13 SMC 3000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
YWW
xxx
xxx = Product type marking code,
See Electrical Characteristics Table
= Manufacturers’ code marking
YWW = Date code marking
Y = Last digit of year (ex: 4 for 2014)
WW = Week code (01 - 53)
3.0SMCJ5.0A /14A /20A /22A /24A /28A /30A /58A
Document number: DS30818 Rev. 12 - 2
1 of 4
www.diodes.com
April 2014
© Diodes Incorporated
3.0SMCJ5.0A /14A /20A /22A /24A /28A /30A /58A
Maximum Ratings (@T
= 25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Pulse Power Dissipation (Note 5)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Superimposed on Rated Load (Notes 6 & 7)
P
I
FSM
PK
3000 W
300 A
Thermal Characteristics
Characteristic Symbol Value Unit
Operating and Storage Temperature Range
T
, T
J
STG
Electrical Characteristics (@T
Part Number
See Notes 1 & 9
Reverse
Standoff
Voltage
(V)
V
RWM
= +25°C unless otherwise specified.)
A
Breakdown
Voltage
@ IT (Note 8)
V
BR
Min (V) Max (V)
Test
Current
IT(mA) IR (μA) VC (V)
Max. Reverse
Leakage
RWM
@ V
Max
Clamping
Voltage
@ I
PP
3.0SMCJ5.0A 5.0 6.40 7.07 10 1000 9.2 326.1 8,000 HDE
3.0SMCJ14A 14.0 15.60 17.2 1.0 5.0 23.2 129.3 3,500 HEK
3.0SMCJ20A 20.0 22.20 24.5 1.0 5.0 32.4 92.6 3,300 HEV
3.0SMCJ22A 22.0 24.40 27.0 1.0 5.0 35.5 84.5 3,000 HEX
3.0SMCJ24A 24.0 26.70 29.5 1.0 5.0 38.9 77.1 3,000 HEZ
3.0SMCJ28A 28.0 31.10 34.4 1.0 5.0 45.4 66.1 1,800 HFG
3.0SMCJ30A 30.0 33.30 36.8 1.0 5.0 48.4 62.0 1,700 HFK
3.0SMCJ58A 58.0 64.40 71.2 1.0 5.0 93.6 32.1 1,500 HGG
Notes: 5. Non-repetitive current pulse, per Fig. 4 and derated above TA = +25°C per Figure 1.
6. Mounted on 8.00mm
7. Measured with 8.3ms single half sine-wave. Duty cycle = 4 pulses per minute maximum.
8. V
measured with IT current pulse = 300µs.
BR
9. Additional voltages may be available upon request. Please contact the Diodes Incorporated sales department for assistance.
= 0V, f = 1MHz
10. V
R
2
(0.013mm thick) land areas.
100
-55 to +175
Max Peak
Pulse
Current
I
PP
(A)
Typical Total
Capacitance
(Note 10)
CT (pF)
°C
Marking
Code
F
75
%
I
ATI
50
LSE DE
25
PEAK POWER OR CURRENT
EAK
10 X 1000 Waveform
as defined by REA
PP pp
I , PEAK PULSE CURRENT (%I )
0
0 25 50 75 100 125 150 175 200
T , AMBIENT TEMPERATURE ( C)
A
°
Fig. 1 Pulse Derating Curve
t, TIME (ms)
Fig. 2 Pulse Waveform
3.0SMCJ5.0A /14A /20A /22A /24A /28A /30A /58A
Document number: DS30818 Rev. 12 - 2
2 of 4
www.diodes.com
April 2014
© Diodes Incorporated