Dinuy RE KNT DA1 User Manual

RE KNT DA1
3-channel KNX / DALI Gateway

More information in: www.dinuy.com

Description

• KNX / DALI Gateway with 3 broadcast output channels.

• Unidirectional and Broadcast communication with the DALI lighting fixtures. Does

not allow the creation of groups within each of the 3 channels.

• Incorporates 3 independent output channels with a maximum capacity of up to
64 ECGs per channel or 128 in total.

• Manual control of its outputs is possible thanks to the front rotary knob.

• Different functions and parameters can be enabled and parameterized by the

ETS: staircase lighting timer with warning function, dimming speed, scene control
(up to 5), sequential operation, soft turn on/off, etc.

• Anti-panic input for safety systems.

• Modular housing (5 modules wide), DIN-rail mounting.

• Built-in KNX TP1 connection terminal.

• Programming and commissioning via ETS4 or later versions.

Technical Characteristics

Reference

RE KNT DA1

External Nominal Voltage

110V-230V~ 50Hz

Supply from KNX Bus

21 ~ 32VDC

Consumption

10W

Application Software

ETS4 or later

Commissioning

System Mode

Valid for

DALI ECGs

Maximum Number of ECGs

64 per channel, 128A in total

Output channels

3

Dimensions

5 modules, 87,5 x 65mm

Operation Temperature

-5ºC ~ +45ºC

Environmental Protection

IP20, according to EN60529

Directives

Low Voltage 2014/35/UE

EMC 2014/30/UE

According to the Standards

KNX Standard 2.0

EN60669-1, 2-1, 2-3

Marking

EIB/KNX

RE KNT DA1
3-channel KNX / DALI Gateway

More information in: www.dinuy.com

Dimensions

Wiring Diagram