Dinuy IT KNT 004, IT KNT 008, IT KNT 016 User Manual

IT KNT 004 / IT KNT 008 / IT KNT 016
4-/8-/16-channel KNX Multifunctional Actuators with 12 / 23 Binary/Analog Inputs

For more information: www.dinuy.com

Description

• KNX Multifunction Actuators that can work as:

• IT KNT 004: 4-channel Switching Actuator or 2-channel

Blinds/Shutters Actuators.

• IT KNT 008: 8-channel Switching Actuator or 4-channel
Blinds/Shutters Actuators.

• IT KNT 016: 16-channel Switching Actuator or 8-channel
Blinds/Shutters Actuators.

• High load capacity, with 16A built-in relays, as well as a zero-crossing­point control, which allows switching very high loads, even capacitive
type.

• Incorporate 12 / 12 / 23 Inputs:

• IT KNT 004: 8-Binary Inputs + 4-Binary/Analog Inputs

• IT KNT 008: 8-Binary Inputs + 4-Binary/Analog Inputs

• IT KNT 016: 16-Binary Inputs + 7-Binary/Analog Inputs

• These inputs can be independently parameterized through the ETS

Software:

• Binary Input: allows the connection of a conventional voltage-free
binary sensor or switch.

• Analog Input: allows the connection of a DINUY temperature probe
(ST KNT 001 or ST KNT 002).

• Incorporates a front keypad for independent manual control of each
output, as well as status indicator LEDs.

• Allows to enable and configure up to 4 / 4 / 7 independent Heating and
or Cooling Thermostats.

• It incorporates 8 / 8 / 16 Logic Functions, Centralized Control, Scenes,
Time Function, etc.

• Possibility of connecting different phases in each output channel.

• Integrated Bus Coupling Unit (BCU).

• DIN-rail mounting, 4 / 4 / 8 modules wide.

• Programming and commissioning via ETS5 or later versions.

IT KNT 004 / IT KNT 008 / IT KNT 016
4-/8-/16-channel KNX Multifunctional Actuators with 12 / 23 Binary/Analog Inputs

For more information: www.dinuy.com

Technical Data

Nominal Voltage

230V~ 50Hz

KNX

Voltage range

21 ~ 32VDC

Consumption

IT KNT 004: < 7mA
IT KNT 008: < 7mA
IT KNT 016: <9mA

Connection type

KNX Bus connector

Commissioning

ETS5 or later

KNX Media

TP1

Configuration Mode

System Mode

Inputs

Number of Inputs

IT KNT 004: 4 Binaries + 8 Binaries/Analogs
IT KNT 008: 4 Binaries + 8 Binaries/Analogs
IT KNT 016: 7 Binaries + 16 Binaries/Analogs

Type

Binaries or Analogs

Cable maximum length

Binary Inputs: <200m
Binary/Analog Inputs: <10m

Scanning voltage

20VDC

Input current

0,5mA

Outputs

Channels

IT KNT 004: 4 Switching or 2 Blinds
IT KNT 008: 8 Switching or 4 Blinds
IT KNT 016: 16 Switching or 8 Blinds

Load
LED Lamps
Incandescence
Motors

16A / 250V~ per channel
400W
3000W
700VA

Isolating Voltage

4KVAC (supply/bus voltage)

Cable section

≤ 2,5mm2

Dimensions

IT KNT 004: 4 DIN units (70mm)
IT KNT 008: 4 DIN units (70mm)
IT KNT 016: 8 DIN units (140mm)

Working temperature

-5ºC ~ +45ºC

Storage temperature

-30ºC ~ +70ºC

Protection degree

IP20 (EN60529)

Directives

Low-voltage 73/23/EEC
EMC 204/108/EC

According to the Standards

KNX Standard 2.0
EN60669-1, 2-1 y 2-3

Marking

EIB/KNX