DINUY EM KNT 003 User Manual
DINUY S.A. c/Auzolan 2, 20303 Irun (Spain)
Tel.: +34943627988 – E-mail: knx@dinuy.com – Web: www.dinuy.com
8-CHANNEL BINARY INPUT
EM KNT 003
USER MANUAL
DINUY S.A. c/Auzolan 2, 20303 Irun (Spain)
Tel.: +34943627988 – E-mail: knx@dinuy.com – Web: www.dinuy.com 2
INTRODUCTION
- The 8-channel Binary Interface has 8 independent channels which can be used as inputs.
- The EM KNT 003 can be used to poll its inputs for the switching state of up to 2 potential-free pushbuttons, switches or
binary sensors with a common reference potential and send the corresponding telegrams to the KNX Bus.
- These may be telegrams for:
• Switching
• Switching and Dimming
• Multiple Switching
• Sequential Switching
• Shutter/Blind Control
• Scenes Management
• Value Transmitter
• Pulse Counter
- Mounting into universal mechanism box or junction box.
- Programming and commissioning via ETS5 or later versions.
Technical Specifications:
Power supply
21 – 32VDC (via Bus)
Power consumption
< 5mA
KNX
Bus voltage
21 ~ 32VDC
Bus consumption
< 5mA
Bus connection
Connecting terminal
Commissioning
ETS5 or later
Inputs
Number of inputs
8
Type
Binaries
Wires length
30cm
Max. Line length
< 200m
Dimensions
38 x 42 x 15mm
Operation temperature
-5ºC ~ +45ºC
Protection degree
IP20 (EN60529)
Directives
Low-voltage 2011/65/EU
EMC 2014/30/EU
According to the Standards
KNX Standard 2.0
UNE-EN 50491-3:2010
UNE-EN 50491-4-1:2013
UNE-EN 50491-5-2:2010
Marking
EIB/KNX
Loading...