DINSAFE MatiGard User Manual

Download

MatiGard™ User Guide

●

Feature-------------------------------------------------------------- 05

●

Overviews---------------------------------------------------------- 07

●

Read Before Using----------------------------------------------- 11

●

Using MatiGard™------------------------------------------------- 15

●

Using Magictrl™-------------------------------------------------- 18

●

Installing & Using The Accessories--------------------------- 34

●

Appendix I: Technical Parameters --------------------------- 39

●

Appendix II: FAQ------------------------------------------------- 40

Features

Professional & Safety

●

With Magictrl™, you can control MatiGard™ anytime & anywhere via your smartphone, even without data network.

●

MatiGard™ is designed for safety from hardware. All commands are encrypted with private protocols which are protected by

IPR laws

●

All accesses to MatiGard™ needs to pass the identity authorization. Only the administrators can operate system setting.

●

Customizable zones with anti-false algorithms, prevent the false alarm due to the pets or other animal, etc.

●

With arming timer, 6 automatic arming can be operated everyday.

●

With motoring, the authorized users can listen to the surrounding voices

Easy & Nice

●

Easy way to pair your sensors to MatiGard™, up to 99 sensors;

●

Identify your remote controllers, users can receive SMS to tell who is pressing down and what the button is.

●

Customizable zone name and zone notifications SMS. Telling where it is when something happens in your zones;

●

SimCard balance checking and SMS forwarding. Users can check the account of MatiGard™ anytime, and forward the SMS

from particular number to your smartphone;

●

SMS notify when AC Power OFF.;

●

SMS notify when arm/disarm successes;

●

Wide LCD display for users to set and query easily;

●

Inner speaker’s volume can be adjusted from 1-4

Powerful

●

With high performance chargeable battery & LPB technology, MatiGard™ can last more than 24 hours when AC Power OFF;

●

Dual network for GSM & PSTN. (Only in GP model);

●

Support more than 16 SMS programable wireless zone

●

With electronic switch, users can using that to control light or TV, air conditioner remotely via Magictrl™;

●

Save more than 70 logs & events.(Dcc can query all, Magictrl™ can query the latest 12 of them);

●

Customizable alarm voice. After recording, it will be played on the emergency call triggered by alarm;

●

Inform any error in PSTN like disconnect or signal error. (Only in GP model)

Features

Away arm Home Arm Menu

Disarm SOS # or CANCEL (in editing mode)

* or DELETE (in editing mode) Microphone, monitor surrounding sounds

USB outlet

(Image-1)

Overviews

Front View

Power Light

Arming Light

Home Arming Light

Inner Speaker

(Image-2)

Power Switch

Power Outlet

Speaker Outlet

PSTN IN

Sim Card Slot

PSTN OUT

Anti-moving Switch

Fixed Support

Battery Pack Cable Slot

Overviews

Back View

Overviews

A1 A0 A2

(Image-3)

Wired Sensor Wired Sensor

External Plug-in Board

Overviews

1. By Icons On LCD Display

2. By TOP Lights

How to check system status?

Normal ON: Sim Card Detected

Flash: Sim Card Error

GSM Signal Strength

Flashing when logs unread exists.

Battery Life

electric quantity for back up battery

System Alarming

Alarm Now 2-Alarm Light ON

Alarmed 2-Alarm Light Flash Per Second

Home Arming 4-Home Arm Light ON

Arming 3-Arm Light ON

Delay Arming 3-Arm Light Flash Per Second

Disarmed Arm Light OFF

Read Before Using

Arming Status

There are 4 arming status, which can be switched by Magictrl™, remote controllers or panel.

●

ARM

ARM means all sensors are working on detecting anything unusual. System will alarm when any sensor get triggered.

Turn to ARM by:

1. Press ARM button in Magictrl.

2. Press ARM button in remote controller.

3. Press ARM button in panel

TIPS: Press and hold the ARM button in panel can use delay arm function temporary.

*Delay Arm means the system will wait a few seconds before turn into arm status. Allows you to leave the house without trigger any alarm. Once it

has been set, all arm button will work on delay arm mode

Normal Items

ARM HOME ARM DISARM SOS

● HOME ARM

HOME ARM means MatiGard™ will ignore some zones’ trigger signals while keeping sensitive for some others'. It’s especially useful when some us-

ers want not to be disturbed at home by shutdown the living areas’ sensors but leaving those sensors surrounding the house working. When using

HOME ARM, those sensors wants to shutdown when at home need their zones to be set in SILENT(AT HOME) mode

Turn to HOME ARM by:

1. Press HOME ARM button in Magictrl™.

2. Press HOME ARM button in remote controller.

3. Press and hold the HOME ARM button in panel

●

DISARM

DISARM means cancel arm or home arm status. After that, MatiGard™ will not alarm, even the zones get triggered(expect those on URGENT mode).

Pressing SOS will trigger alarm even in DISARM.

1. Press DISARM in Matictrl™

2. Press DISARM in remote controller

3. Press administrator password + DISARM button on panel

●

SOS

SOS means alarm immediately.

Read Before Using

Zone And Zone Mode

Zone is the working area of 1 or more sensors. In MatiGard™, one zone is represented by ZONE 01,02,etc. For your convenience, please assign zones

by your room sections, like ZONE 01 is assigned to living room and ZONE 02 is assigned to bedroom.

One MatiGard™ owned more than 30 programable wireless zones. Each zone can be paired to 1 or more sensors. Users can choose zone numbers

freely during the pairing process.

Each zone can be set to diﬀerent zone modes. Which stands for diﬀerent alarm strategies. By using zone modes, MatiGard™ can provide security ser-

vices more user-friendly.

●

IMMEDIATE: Alarm when in ARM or HOME ARM status, but not in DISARM status when sensors get triggered.

●

URGENT: Alarm when in ARM, HOME ARM or DISARM once the sensors get triggered. Usually use when zone pairs to smoke detector, gas leaking

detector, SOS button.

●

SILENT(AT HOME): Alarm when in ARM status and be disable when in HOME ARM or DISARM status.

●

DOOR BELL: Never alarm, be speciﬁc to pairing to wireless doorbell.

(Zone must in one of those 4 modes above)

●

INFORMING: Sound DINGDONG when in DISARM status if sensors get triggered. Usually use to pair to door sensor.

●

ANTI-FALSE: Alarm only when 2 or more sensors in the same zone get triggered when in ARM or HOME ARM status. Usually using it to pair to PIR

sensor. By using ANTI-FALSE, we can reduce false alarm caused by temperature or environment.

(Zone can be add in 2 more modes above)

We ships MatiGard™ with preset zone modes. ZONE 01 with door detector is in IMMEDIATE mode. ZONE 02 and ZONE 03 pair to 2 PIR sensors are in

SILENT(AT HOME) mode.

You can change zone mode in Magictrl™.

Read Before Using

Using MatiGard™

For your convenient, please install MatiGard™ properly. Usually, setting in the center of the guarding place would be helpful to receive

all the RF signals. Keep away from mega metal objects or those appliances with high frequency interference, also the reinforced con-

crete wall or the ﬁre doors.

1. Sim Card Installation

Turn to the back side and insert the sim card into the slot (-image1).

*Your sim card should be available for MatiGard™ to send and receive messages via SMS.

2. Power ON

Power outlet is next to the SIM slot, connect it to the power supply with the cable. Turn on

MatiGard™(-image1), after the beeping sound the LCD display will show characters like ‘500ms’.

Then the system will check sim card status. It will ﬁnish initialization when date and time are

shown on the LCD display(-image2). Now you can move to the next.

(Image-1)

(Image-2)

Using MatiGard™

3. Record Voice Message

4. Make a call via MatiGard™

On MatiGard™ panel, press for 2 sec, dial your cellphone No. , press √ to make a call.

Press √ again to ﬁnish the phone call.

5. When alarm goes oﬀ

When alarm is triggered, MatiGard™ will run siren and SMS to the pointed contacts, after that, it will make the

emergency call to all the contacts recurrently.

When one contact is busy or unable to connected, MatiGard™ will keep calling the next until all contacts are called

3 times or some contacts answer the phone and stop this process.

Using MatiGard™

When the emergency call are answered, MatiGard™ will play the voice message. Users can press down the buttons be-

low to operate the system.

[4]: Siren ON [5]: Siren OFF

[6]: Intercom ON/OFF

[7]: Play voice message

[*] Monitor(default time is 30 sec, press * again in 30 sec for continue monitoring) [#]: Exit and hangup, MatiGard™ will

stop making emergency call.

*Please remember to press # to stop emergency call when you trigger alarm when testing MatiGard™.

6. Factory Reset

Press 951753082# on panel to reset. All password or settings will be restored to factory default settings. During the pro-

cess, all status lights will be ﬂashing.

Using Magictrl™

Magictrl™ is a powerful and convenience smartphone app for using and managing MatiGard™.

Download it from http://bin.bz/m Now we have iOS & Android versions.

Initialization

Initialize when ﬁrst time using or adding new device.

image1: Country Code & Sim Card Number

Tips: How to nd my number?

On MatiGard™ panel, press for 2 sec, dial

your cellphone No. , press √, wait for calling

in and check the No.

Using Magictrl™

image2: Password for MatiGard™ image3: Name & Validation

Tips:

Diﬀerent password means diﬀerent identities such as administrator or

user. The user interfaces and functions are diﬀerent from each other. Admin-

istrator’s default password is 123456 and user’s is 1234. Both can be modiﬁed

by administrator.

image4: Auth Code & Login

Using Magictrl™

Operations (as administrator)

Using Magictrl™

Arm Disarm Home Arm

The deﬁnition of ARM/DISARM/HOME ARM is in Page11.

Electronic Switch

Manage devices connect to the A1-A3 slot in the external plugin board.

Monitor Call MatiGard™ and monitor the surrounding sounds.

* Please follow the voice message, some devices need password before monitoring.

SOS

In emergency case, all contacts will be called in order and some will receive SMS alarm.

Device Setting Setting and managing the device

Device Info Check device status

Using Magictrl™

In this section, most of the operations need to be save and send SMS com-

mands after setting.

You will receive a SMS reply from MatiGard™ like ’Success! Commands are

accepted’ when the setting is in eﬀect.

Device Setting (as adminstrator)

image1 Device Setting

Alarm Contacts

——Up to 6 contacts. Get called and SMS(optional) in emergency.

Zone Setting

——Up to 15 zones with customized name, SMS and zone mode.

Remote Controller Setting

——Up to 10 controllers with customized name and ARM/DISARM SMS.

General Setting

——With Arming Timer, Delay Arming, Delay Alarm, SMS Forward and Account Management, etc.

Using Magictrl™

Alarm Contacts

Reject SMS by switch OFF the ‘Receive SMS’

Note: SMS notiﬁcations are divided into alarm

SMS and System Notification. Only the first

contact in the list will receive the system noti-

ﬁcations, which include events like AC Power

OFF, SMS Forward, MatiGard™ ARM/DISARM

and Remote Controller ARM/DISARM. The lat-

est two can be chosen not to be received.

image1 Alarm Contact Setting

Zone Setting

Customized name for the zone, like

bedroom, living room, etc..

image1 Zone Setting

Using Magictrl™

image2 Zone Mode

Optional:

Informing —Trigger BEEP/DingDong when disarmed

Anti-false—Alarm by 2 or more sensors

Choose one of below:

Immediate —Active when arming

Urgent—Active even when disarmed

Silent—Silent when home arming

Doorbell —Sound DingDong, not alarm

Zone modes are the alarm strategies for one

zone, check the deﬁnition in Page 13

Using Magictrl™

Remote Controller Setting

Using Magictrl™

image1-1【Custom Name

】

Name the controller, like ‘Papa’, ‘Mama’, ’Kids’, “Nanny”, etc

Using Magictrl™

image1-2【Arm SMS

】

image1-3【Disarm SMS

】

image1-4【SMS Demo

】

Set ARM/DISARM messages for

controllers, like ( Out for work ),

( Back from school ) , etc.

General Setting - Arming Timer

Using Magictrl™

image1【Setting Timer

】

image2

With 6 timers for automatic arming by time. Justify arming time here.

Default time is 0 sec, means immediately active when receive

arming command. Delay time is max to 90 sec.

Usually used in preventing alarm before people can walk oﬀ

the zone after arming.

Default time is 0, means alarm immediately when sensor get triggered.

Delay time is max to 90 sec.

Usually used for those who lost their remote controller or phone to walk in

home and disarm MatiGard™ in panel before the alarm goes oﬀ.

Delay Arming Delay Alarm

Using Magictrl™

image1【Setting Delay Arming

】

image1【Setting Delay Alarm

】

Siren Time Speaker Volume

Using Magictrl™

image1【Setting Siren Time

】

image1【Setting Volume

】

Default time is 1 min, means siren sounds for 1min

when emergency. Max time is 30 mins.

Minimum volume is 1, up to 4.

Change Administrator Password Change User Password

Using Magictrl™

image1【Setting Password

】

image1【Setting User Passwors

】

Change the password for administrator and save it in MatiGard™.

Keep it to your own and use it in initialization.

Change the password for user and save it in MatiGard™. Please

distribute it to other members in family.

SMS Forward Re-Initialization

Using Magictrl™

image1【Forward Setting

】

MatiGard™ will forward all the SMS from this number to

the ﬁrst one in the Alarm Contacts.

Do initialization again, click back when misoperated.

Using Magictrl™

System Status: Query about time, arming state, speaker volume, siren time, etc.

Arming Time: Query about the gap between setting and working of arming and alarming.

Informing Strategies: Query about the default contact of MatiGard™ and the types of SMS

it’ll receive.

Arming Timer: Query about the schedule of automatic arming.

Zone Modes: Query about the zone mode of the pointed zone.

Zone Notications: Query about the notiﬁcation SMS of the pointed zone.

Remote Controller’s Message: Query about the ARM/DISARM SMS of the pointed controller.

Contacts: List all alarm contacts, those with * means allowing to receive alarm SMS.

Logs & Events: List the latest 12 logs of MatiGard™, contains all the system logs (power status,

etc) and ARM/DISARM events.

Sim Card Balance: Fill in the carrier’s service number and checking code, MatiGard™ will sum-

mit them to the carrier via SMS and forward the reply SMS to you.

Brief introducing only.

Device Info

Installing & Using The Accessories

MatiGard™ is shipping with 2 remote controllers, 2 PIR sensors and 1 door/window gap sensor. We’ve already pair

them to diﬀerent zones for the most common apartment which contains 2 bedroom and 1 door. You can easily add

more sensors or remote controllers following the intro in this chapter.

We recommend you to setup sensors as the picture shown below.

Installing & Using The Accessories

Door/Window Gap Sensor Installation[demo by door]

Process:

1. Clean the installation part of the door and frame. Stick double sided tape on the back of A & B

2. Align A & B, make sure the indicator lights of A are next to B. Put A to the door frame and B to the door. The distance between them should be less than 10mm.

3. After installation, the indicator light 1 should be ﬂashing for 1 sec when you push the door.

4. Reinforce the sensor by using screws (for wooden doors only, A should be opened for tightening screw Pairing is required after installation, please check Page XX for more details

Replace Battery:

When the indicator light 2 of A is continue shining, means the battery needs replacement.

1. Open the transmitter A and replace the new 23A 12V battery.

2. Push the door to see if the indicator light 1 is on. If the sensor doesn’t work, check if the battery is putting reversely or contact your reseller.

This sensor consists of 2 parts, the transmitter A and the magnet B. Battery is in transmitter.

A B

Installing & Using The Accessories

PIR Sensor Installation

10-30

8-12m

2.2m

110

Installing & Using The Accessories

Remote Controller Overview

Press button to change the system arming status.

Replace Battery:

If no indicate light on when pressing button, you should change the battery. Please loose 3 screws in the back to remove the cover, then change the battery.

The Pairing, Deleting And Checking For Sensors & Remote Controllers

Pairing means to make connection between accessories and MatiGard™. One sensor can only pair to one zone, while one zone can pair with amount of sensors. One MatiGard™ can pair with amount of remote controllers, and vice versa.

Door gap sensor is in zone 01. 2 PIR sensors are in zone 02 & 03. 2 remote controllers are paired with name RC01 & 02.

New sensor or remote controller needs pairing before working.

• Sensor Pairing

Press 1# on the panel, wait for the BEEP sound, press zone number to pair to, press # again Turn on and trigger the sensor, wait for the voice prompts.

• Sensor Deleting

Press 1* on the panel, wait for the BEEP sound to delete all sensors.

• Sensor Checking

Press 3# on the panel, wait for the BEEP sound

Turn on and trigger the sensor, the LCD display should show zone number and serial number of the sensor. If there’s no zone number on the display, you need to re-pair the sensor.

• Controller Pairing

Press 2# on the panel, wait for the BEEP sound Press any button on the remote controller, wait for the voice prompts.

• Controller Deleting

• Press 2* on the panel, wait for the BEEP sound to delete all controllers.

• Controller Checking

• Press 3# on the panel, wait for the BEEP sound

• Press any button on the remote controller, the LCD display should show like RC XX and serial number of the sensor. If there’s no RC XX on the display, you need to re-pair the controller.

Tips: If the pairing fails or the sensor pairs to a wrong zone, you can

re-pair it again. MatiGard™ only keep the latest pairing state.

Installing & Using The Accessories

• Control Panel

Standby current: 20mA Alarm current: ≤ 500mA Power supply: 12V DC Working temperature: -10°C ~ +85°C GSM frequency : 850/900/1800/1900MHz quad band Receiving code: ASK Transmission Frequency ( RF): 315/433MHZ±0.5MHZ Transmission distance: 100 M wireless detectors: 99 wire detectors: 7

• Door Contact

Power Supply: DC12V (inner 12V battery) Standby Current: ≤ 20 uA Transmission Current: ≤ 15mA Transmission Frequency: 315/433MHZ±0.5MHZ Transmission Distance: No obstacle 80m Internal Distance: 15 mm Working Condition: Temperature –10°C ~+ 40 °C Humidity: ≤ 90% rh

• PIR Detector

Power Supply: DC9V (inner 9V battery) Standby Current: ≤ 100 uA Transmission Current: ≤ 20mA Transmission Frequency: 315/433MHZ±0.5MHZ Transmission Distance: No obstacle 80m Detective Speed: 0.3 - 3m/s Detective Distance: 5 - 12m Detective Range: Horizontal 110° Vertical 60° Working Condition: Temperature –10 °C ~+ 40 °C Humidity: ≤ 90 rh

• Remote Controls

Power Supply: DC=12V~8.4(Inside A23 DC=12V dry battery) Standby Current: 0 Transmission Current: ≤ 15 mA Transmission Frequency: f=433.92±0.2 MHz Transmission Speed: T ≤ 1 second Transmission Distance: Without obstacle 80m Working Condition: Temperature -10°C~ +40°C Humidity: ≤ 90 rh

Appendix I: Technical Parameters

Appendix II: FAQ

Symptoms Causes Remedies

Cannot receive alarm call

1.Didn’t arm the system;

2.Less than 30 seconds after arming.

3.Setup wrong phone number;

4.The two parts of door contact is installed

too far from each other.

5.Didn't activate PIR or other ac- cessories;

6.Didn’t pair correctly

1.Make arming;

2.Operate after 30 seconds;

3.Setup the number again according to the manual;

4.Adjust the installation place of door contact;

5.Activate PIR detector;

6. Pair again

The distance of remotely control

is too short and the indicator

light is not strong enough

1.The battery of remote controls got rusted;

2. Lowbattery

1.Clean the rust;

2. Replace the battery with a new one

Indicator light of door contact or

PIR detector is always on.

Low battery Replace the battery with a new one

Make alarm call very slowly Too many alarm contacts Set it again according to the operation manual

The control panel cannot receive

RF signals

Didn’t pair them correctly Please pair control panel with other accessories again

MatiGardTMUser Guide Design by Dinsafe, 2013

DINSAFE MatiGard User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual