Dino-Lite WF-20 User Manual

Dino-Lite CONNECT
WF-20
Instruction Manual
Contents
FCC Statement
Instroduction
System Requirement
Package Contents
Overview and Function
Getting Started
DinoConnect APP Overview
Specification
www.dino-lite.com
2
3
3
3
4
5
8
10
11
DECLARATION OF CONFORMITY WITH FCC RULES
FOR ELECTROMAGNETIC COMPATIBILITY
We, AnMo Electronics Corporation, of 5F-1, No. 76, Sec. 2, Tung-Da Rd., Hsinchu 300, Taiwan, decline under our sole responsibility the product,
to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received , including interference that may cause undesired operation.
WF-20
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.
Federal Communication Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
2
Introduction
The WF-20 is a piggyback design of Wi-Fi streamer, as well as a wireless router, to use with Dino-Lite Edge AF series for viewing and sharing observation in the fields.
System Requirement
Mobile device or computer with operating system:
iOS 10.X or later Android 6.0 or later Windows XP (SP3)/Vista/7/8/10
Compatible Dino-Lite Digital microscope:
Dino-Lite Edge AF series
Package Contents
Mini USB charging cable
Protection
cap
3
Dino-Lite WF-20
Wi-Fi streamer
Overview and Function
Button usage and description:
Interface release button Wi-Fi signal LED indicator Battery LED indicator On / off power button Reset pin-hole button Mini USB port (for charging purpose)
Buttons
On / off power button
Reset pin-hole button
Description
Press and hold for 1.5 seconds to turn on/off
Press and hold the pinhole button for 3 seconds to restore factory settings
LED status and description:
Indicator
Green LED (Wi-Fi signal)
Red LED (battery level)
Blinking
3 flashes per cycle 2 flashes per cycle 1 flash per cycle Solid Blinking repetitively
Status
Data transferring
Battery remains >70% Battery remains <70% Battery remains <40% Battery full charged Battery under charging
4
Getting Started
Charging the Battery
1.
Connect the WF-20 to a computer or a charger using the Mini USB charging cable.
2.
The blinking red LED indicates the battery is under charging. When battery is fully charged, the LED turns solid.
Notice:
The battery should be fully charged before first use.
Assembling the Device
To use with the WF-20, the USB adapter cap needs to be removed from AF series and replaced with WF-20.
1. Pressing the two interface release buttons at the same time to release the USB interface adapter cap.
CAUTION:
Do not bend the join part anytime especially while releasing the devices. Doing so may cause damage on the devices.
Remove the protection cap from the WF-20 and cover that onto
2.
the USB adapter cap.
or
Notice:
To prevent dust build-up inside, cover the protection cap on WF-20 or USB adapter cap whenever it is detached from the Dino-Lite body.
Attach the WF-20 onto AF series by aligning the Dino-Lite logos
3.
on the same side.
5
Downloading the APP or software
iOS/Android:
Download and install DinoConnect from the Apple© App Store© or Google Play.™
Windows:
Install DinoCapture 2.0 version 1.5.30 or above via CD. The latest version of DinoCapture can also be downloaded from
https://www.dino-lite.com/download01.php.
Powering on
Press the power button for 1.5 second. Wait until the LEDs of Dino-Lite lighted up.
To power off:
Press the power button again for 1.5 second until all the LEDs is shut off.
Setting the Network
Follow the steps below to setup connection with WF-20 on your iOS/Android device or Windows PC.
iOS/Android:
Connecting with WF-20
1.
Go to settings of your iOS/Android device. Turn on Wi-Fi.
2.
Select WF-20’s SSID (default:
3.
“Dino-Lite WF-20”), and input password (default: “12345678”).
4.
Launch DinoConnect for using Dino-Lite. (Optional) When multiple WF-20 are using nearby, be advised
5.
to change WF-20’s SSID and password in DinoConnect settings for distinguishing purpose.
Note:
The WF-20 can be possibly connected up to 10 mobile devices at the same time, but it is recommended to keep less than 5 connections for retaining image fluency.
6
devices
WF-20iOS & android
Joining the WF-20 to another wireless network
devices
WF-20iOS & android
Access Points
You may further setup WF-20 as a router to build connection between your mobile device and existing wireless network.
1.
Open DinoConnect settings . Tap “Choose a network”.
2.
Choose a network, then enter password.
3.
Now your device is able to connect with the chosen network via the WF-20. The device will remember the last connection to wireless network.
Windows PC/laptop:
1.
Turn on Wi-Fi of your computer, and select the Network by clicking or icon in the notification area. Select WF-20’s SSID (default: “Dino-Lite WF-20”), and click
2.
the Connect button. Enter the security key (default: “12345678”), and click Next
3.
to connect. Launch DinoCapture 2.0 for using Dino-Lite.
4.
7
DinoConnect APP Overview
DinoConnect on iOS
Function
No.
1
Battery indicator 2 Resolution setting * 3 LED switch * 4 Exposure control *
Magnification 5
display box 6 Line measurement
7 Diameter circle
8 Three point circle
9 Three point angle
10 Text 11 Text color/size 12 Trash bin
13 Gallery
14 Record button 15 Shutter button 16 Settings *
*
Only the first connected PC/mobile device has the exclusive control right on WF-20.
Description
Battery level of the WF-20. To choose resolutions. To control Dino-Lite’s LED lighting. To adjust exposure.
To input magnification.
To measure linear distance between two endpoints.
To measure the circumference, area, and radius of a circle that passes two endpoints of the diameter.
To measure the circumference, area, and radius of a circle that passes three endpoints.
To measure the angle between three endpoints. To write text on the picture. To change text color and size. To delete measurement and text on the image.
To view captured images or recorded videos of Dino-Lite.
To start or stop video capture. To capture an image. To change settings of connections, MicroTouch, etc.
(AMR models doesn’t require)
8
How to do measurement on iOS
1.
Select the measurement function on the toolbar.
2.
Input the magnification. (AMR models doesn’t require)
3.
Tap on the image to define an endpoint.
4.
To fine adjust the endpoint’s position, use swipe gesture to control the endpoint’s movement.
5.
Repeat step.2 and 3 to define other endpoints required by the measurement.
6.
Tap anywhere to complete the measurement.
DinoConnect on Android
Function
No.
LED switch *
1
Refresh button
2 3
Exposure control *
4
Gallery
5 Record button 6 Shutter button
7 Settings *
*
Only the first connected PC/mobile device has the exclusive control right on WF-20.
Description
To control Dino-Lite’s LED light. To refresh preview image. To adjust the exposure.
To view captured images or recorded videos of Dino-Lite.
To start or stop video recording. To capture an image.
To change settings of resolution, connections, MicroTouch, etc.
9
Battery Information
The built-in battery of WF-20 has a limited lifespan and may eventually need to be serviced. Do not repair or replace the built-in battery of WF-20. Please contact your local dealer and they will help to send back to the manufacturer for replacing the battery, which is not covered under warranty.
The WF-20 was designed to have more than 2.5 hours battery life, but may vary with different Dino-Lite model and the way of using. Charging the WF-20 may take 3-4 hours by a USB charger or a power bank. The WF-20 can still be used while charging, but be noted that extra heat will be generated and may affect circuit performance under poor ventilation.
The battery of WF-20 retains average 80% of its original capacity after 500 charge cycles. The following tips may help to prolong battery lifespan:
Avoid draining the battery all the way to 0%. Prevent exposing or charging the WF-20 at temperature above 30°C (86°F). Charge the WF-20 to 50% for long-term storage. Store the WF-20 at 15~25°C (59~77°F).
For extending battery life, you may consider to reduce Dino-Lite’s LED brightness in APP or software.
10
Specification
Product name
Support protocol
Antenna
Frequency
SSID
Battery
Power consumption
Continuous operation time
Operation temperature
Dimensions
Weight
WF-20
Wi-Fi IEEE802.11b / g / n
2.4GHz Wi-Fi FPCB antenna
2.412GHz ~ 2.485GHz
Dino-Lite WF-20
3.7V / 1600mA
2.5W
2.5 hours (Li battery)
10~45°C (50~113°F)
58mm x 36.5mm x 32mm
approx. 57g (with battery)
11
12
P/N:WF12101
Loading...