DingTec BU-1000, BU-1300, BU-1600B, BU-1600C, BU-1700 User Manual
...
DingTec® Laminators
BU-360 to BU-2040 BU-380II to BU-2040II
User’s Manual
Version 1.0
Eastsign International Ltd
Rm 1406, 14/F., Shatin Galleria
18-24 Shan Mei Street, Fotan, Shatin, N.T.
Hong Kong
http://www.eastsign.com
User’s Manual of DingTec® Laminators – BU-380 to 2040 Cold Laminator Series
2
PREFACE
DingTec® BU-360 to 2040 series laminators are low-cost, cold laminators with
either manual or automatic operating mode. They are easy to use and install. Users must
read this manual thoroughly in order to maximize the capacity of the laminators and
avoid damage.
I. Main specifications
1． Manual Cold Laminator Series
Model
Laminating
Width (mm)
Laminating
Thickness (mm)
Roller’s
Diameter (mm)
Machine
Weight (kg)
Remarks
BU-360
360 5 36
8.5
BU-450
450
10
50
15.5
BU-650
650
10
65
24
BU-1000
1000
15
90
65
BU-1300
1300
15
90
76
BU-1600B
1600
23
130
150
With a stand
BU-1600C
1600
23
130
163
BU-1700
1700
25
155
175
BU-1920
1900
20
155
195
BU-2040
2000
25
155
200
With a stand, a
foot-wheel, and a
plate for pressing
picture
2． Automatic Cold Laminator Series
Model
Laminating
Width (mm)
Laminating
Thickness
(mm)
Roller’s
Diameter
(mm)
Machine
Weight
(kg)
Motor
Power
Remarks
BU-380II
380 5 36
8.5
AC 14W
BU-650II
650
10
65
24
DC 12V 30W
BU-650IIZ
650
10
65
24
DC 12V 30W
Electric, with foot-pedal,
hi/low speed; 650IIZ
with a stand for
supporting film
BU-1000II
1000
15
90
65
25W
BU-1300II
1300
15
90
76
25W
Electric/manual modes,
with stand, stepless
speed regulating with
foot-pedal switch
BU-1600BII
1600
23
130
153
40W
Electric/manual modes;
with stand; stepless
speed regulating; with
foot-pedal switch; with
foot-wheel, optional
plate for pressing picture
BU-1600II
1600
23
102
160
40W
BU-1600CII
1600
25
130
163
40W
BU-1700II
1700
25
155
175
60W
BU-1920II
1900
20
155
195
60W
BU-2040II
2000
25
155
200
60W
Electric/manual modes;
with stand, stepless
speed regulating with
foot-pedal switch; with
foot-wheel; a plate for
pressing picture
User’s Manual of DingTec® Laminators – BU-380 to 2040 Cold Laminator Series
3
II. Manual Cold Laminator
Figure 1
A BU-380 to 2040 series manual cold laminator consists of following parts:
1. The upper and lower rubber rollers
2. The front and back working platforms
3. The left and right supports
4. The knob of adjustment
5. The handle (controlling the rollers)
6. Pressing roller (equipped with BU-1600 models and above)
7. The pedal (equipped with BU-1600 models and above)
While the BU-380 to 2040 series cold laminator have a simple structure and are
easy to use, it requires a lot of mounting experiences. Users can gain experience through
practice. Appropriate mounting is important to achieve good laminating quality.
The laminating operation typically needs 2 or 3 people working together. The
operation varies for different cold laminator models. In addition, electric cold laminator
usually needs one person less than its manual counterpart.
There are two basic cold laminating methods, as described below.
(i) Front Laminating Method
1. Cut one piece of film with the width about the same as that of the picture to be
laminated and the length about 5-10 cm longer than that of the picture.
2. Turn adjustable knob counter-clockwise to lift the roller, insert the film into the roller
for about 50 cm, then wrap one side of the film around the upper roller. Straighten the
film with rollers, align two sides (to ensure the film is straight), then turn the knobs
clockwise until idling (Figure 2).
Loading...