DINGSHANG TIMES TECHNOLOGY J AC319 1 Users manual

1.Wirelesschargingmodulebrief

The car phone wireless charging transmitter module applies to 12V car power system. This

2.Wirelesschargingmodulecharacteristics

3.Effectiveworkingarea

Y-axischargeablearea：-35mm~35mm

module uses ST's chip, WPC Qi standard, A6 three coils. chip built-in FOD protection function,

transmit power minus the effective power data of receiving end RX return, approximated get

parasitic heat loss power. By setting the FOD protection threshold, indirectly limit the phone

parasitic loss temperature rise.

9V~16Vpowersupply

WPCQi1.2standard

A6typethreecoils

Overvoltageprotection

Overcurrentprotection

Overtemperatureprotection

ForeignObjectDetection(FOD)protectionLED

LEDdisplaychargingstatus
EnergyConvertEfficiency≥65%

X-axischargeablearea：-15mm~15mm

Z-axischargeablearea：Shellsurface0mm~6mm

4.Caution

1.When the phone during charging, due to the large energy, the smart key could not be placed

next to and on the top of the phone to prevent undetectable smart key. We recommend car manual

instructions: "When the phone during charging, please do not place the smart key next to and on

the top of the phone."

2.It is not allowed to disassemble and retune the mechanism without special training because

the production is assembled and tuned using special method.

3.Storage: avoid storing the production in high temperature and heavy wet place.

4.Handling: avoid extra force to cause the distortion of the sample when handling.

5.Great care should be taken when to use the materials which can generate gases, such as

silicon Rubber, etc. The gases may harm to the parts of the production.