DINGLI S0608EH, S0812EH, S0808EH, S1212EH, S1412-EHXC Operators Manual With Maintenance Information

SELF-PROPELLED SCISSOR LIFTS

OPERATOR’S MANUAL

with Maintenance Information

For S0608EH/S0808EH/S0812EH/S1012EH/S1212EH/S1412-EHXC

For S0608E/S0808E/S0812E/S1012E/S1212E/S1412-EXC

( Hydraulic Motor / DC Motor Drive )

THE MANUFACTURER SHALL NOT BE HELD LIABLE IN CASE OF FAULTS
OR ACCIDENTS DUE TO NEGLIGENCE, INCAPACITY, INSTALLATION BY
UNQUALIFIED TECHNICIANS AND IMPROPER USE OF THE MACHINE

DO N OT O PE RA T E THI S M A C HI NE UNT IL YOU READ AND UNDERSTAND
ALL THE DANGERS,WARNINGS AND CAUTIONS IN THIS MANUAL

Part Number: SM0110111A_Rev4.0

Zhejiang Dingli Machinery Co., Ltd.

WARNING

Fourth Edition, October 2018 Printing

OPERATOR’S MANUAL with Maintenance Information

Important

Read, understand and obey these safety rules
and operating instructions before operating
this machine.

Only trained and authorized personnel shall be
permitted to operate this machine. This
manual should be considered a permanent
part of your machine and should remain with
the machine at all times. If you have any
questions, please call DINGLI Machinery.

Contents

Safety Rules 1

Legend 9

Decals 10

Specifications 16

Control panel 28

Page

Owners, Users and operators:

We appreciate your choice of our machine for
your application. Our number one priority is
user safety, which is best achieved by our joint
efforts. We feel that you make a major
contribution to safety if you, as the equipment
users and operators:

1 Comply with employer, job site and

governmental rules.

2 Read, understand and follow the

instructions in this and other manuals
supplied with this machine.

3 Use good safe work practices in a

commonsense way.

4 Only have trained / certified operators,

directed by informed and knowledgeable
supervision, running the machine.

If there is anything in this manual that is not
clear or which you believe should be added,
please contact us.

Pre-operation Inspection 31

Workplace Inspection 33

Function Tests 34

Operating Instructions 39

Transport and Lifting Instructions 49

Maintenance 53

Schematic 81

Inspection and Repair Log 91

Contact us:

Zhejiang Dingli Machinery Co., Ltd.

1255 Baiyun South Road. Leidian Town.
Deqing Zhejiang

China

Tel: [phone]

Fax: [phone]

Web: www.cndingli.com

E-mail:[e-mail]

i

OPERATOR’S MANUAL with Maintenance Information

Safety Rules

Danger

Failure to obey the instructions and
safety rules in this manual will
result in death or serious injury.

Do Not Operate Unless:

√ You learn and practice the principles of

safe machine operation contained in this
operator's manual.

1 Avoid hazardous situations.
Know and understand the safety rules

before going on to the next section.

2 Always perform a pre-operation

inspection.

3 Always perform function tests prior to

use.

Decal Legend

DINGLI product decals use symbols, color
coding and signal words to identify the
following:

Safety alert symbol — used to alert

personnel to potential personal injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.

Red — used to indicate the
presence of an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.

Orange — used to indicate
the presence of a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.

4 Inspect the workplace.

5 Only use the machine as it was

intended.

√ You read, understand and obey the

manufacturer's instructions and safety rules
— operator's manual and machine decals.

√ You read, understand and obey employer's

safety rules and worksite regulations.

√ You read, understand and obey all

applicable governmental regulations.

√ You are properly trained to safely operate

the machine.

Yellow with safety alert
symbol — used to indicate the presence of a
potentially hazardous situation which, if not
avoided, may cause minor or moderate injury.

Blue without safety alert
symbol — used to indicate the presence of a
potentially hazardous situation which, if not
avoided, may result in property damage.

1

OPERATOR’S MANUAL with Maintenance Information

Safety Rules

Inte nded Use

This machine is intended to be used only to lift
personnel, along with their tools and materials
to an aerial work site.

Safety Sign Maintenance

Replace any missing or damaged safety signs.
Keep operator safety in mind at all times.

Use mild soap and water to clean safety signs.

Do not use solvent-based cleaners because
they may damage the safety sign material.

Electrocution Hazard

This machine is not electrically insulated and
will not provide protection from contact with or
proximity to electrical current.

Allow for platform movement, electrical line
sway or sag and beware of strong or gusty
winds.

Keep away from the machine if it contacts
energized power lines. Personnel on the
ground or in the platform must not touch or
operate the machine until energized power
lines are shut off.

Do not operate the machine during lightning or
storms.

Do not use the machine as a ground for
welding.

Tip-over Haza rd

Occupants, equipment and materials must not
exceed the maximum platform capacity or the
maximum capacity of the platform extension.

Maximum capacity – S0608EH

Maintain safe distances from electrical power
lines and apparatus in accordance with
applicable governmental regulations and the
following chart.

Voltage
Phase to Phase

0 to 300V Avoid Contact

300V to 50kV 3.05

50kV to 200kV 4.60

200kV to 350kV 6.10

Minimum Safe

Approach Distance

Meters

Maximum occupants (Indoor use) 2

Maximum occupants (Outdoor use) 1

Platform allowable maximum load 380kg

Extension deck allowable maximum load 113kg

Maximum capacity – S0808EH

Maximum occupants (Indoor use ONLY) 2

Platform allowable maximum load 230kg

Extension deck allowable maximum load 113kg

Maximum capacity – S0812EH

Maximum occupants (Indoor / Outdoor use) 2

Platform allowable maximum load 450kg

Extension deck allowable maximum load 113kg

Maximum capacity – S1012EH

Maximum occupants (Indoor use) 2

350kV to 500kV 7.62

500kV to 750kV 10.67

750kV to 1000kV 13.72

Maximum occupants (Outdoor use) 1

Platform allowable maximum load 320kg

Extension deck allowable maximum load 113kg

2

OPERATOR’S MANUAL with Maintenance Information

Safety Rules

Maximum capacity – S1212EH

Maximum occupants (Indoor use ONLY) 3

Platform allowable maximum load 320kg

Extension deck allowable maximum load 113kg

Maximum capacity – S1412-EHXC

Maximum occupants (Indoor use ONLY) 2

Platform allowable maximum load 250kg

Extension deck allowable maximum load 113kg

Maximum capacity – S0608E

Maximum occupants (Indoor use) 2

Maximum occupants (Outdoor use) 1

Platform allowable maximum load 380kg

Extension deck allowable maximum load 113kg

Maximum capacity – S0808E

Platform allowable maximum load 250kg

Extension deck allowable maximum load 113kg

Platform retracted Platform extended

Extension Platform

only only

Work Area Safety

Do not raise the platform unless the machine
is on a firm, level surface.

Do not drive over 0.8 km/h with the platform
raised.

Maximum occupants (Indoor use ONLY) 2

Platform allowable maximum load 230kg

Extension deck allowable maximum load 113kg

Maximum capacity – S0812E

Do not depend on the tilt alarm as a level

Maximum occupants (Indoor/Outdoor use) 2

Platform allowable maximum load 450kg

Extension deck allowable maximum load 113kg

Maximum capacity – S1012E

Maximum occupants (Indoor use) 2

Maximum occupants (Outdoor use) 1

Platform allowable maximum load 320kg

Extension deck allowable maximum load 113kg

Maximum capacity – S1212E

Maximum occupants (Indoor use ONLY) 3

Platform allowable maximum load 320kg

Extension deck allowable maximum load 113kg

Maximum capacity – S1412-EXC

Maximum occupants (Indoor use ONLY) 2

indicator. The tilt alarm sounds on the chassis
and in the platform when the machine is on a
slope.

If the tilt alarm sounds:

Lower the platform. Move the machine to a
firm, level surface. If the tilt alarm sounds
when the platform is raised, use extreme
caution to lower the platform.

For outdoor use machine, do not raise the
platform when wind speeds may exceed 12.5
m/s. If wind speeds exceed 12.5 m/s when the
platform is raised, lower the platform and do
not continue to operate the machine.

Do not operate the machine in strong or gusty
winds. Do not increase the surface area of the
platform or the load. Increasing the area
exposed to the wind will decrease machine
stability.

3

OPERATOR’S MANUAL with Maintenance Information

Safety Rules

Do not use the platform controls to free a
platform that is caught, snagged or otherwise
prevented from normal motion by an adjacent
structure. All personnel must be removed from
the platform before attempting to free the
platform using the ground controls.

Use extreme care and slow speeds while
driving the machine in the stowed position
across uneven terrain, debris, unstable or
slippery surfaces and near holes and
drop-offs.

Do not drive the machine on or near uneven
terrain, unstable surfaces or other hazardous
conditions with the platform raised.

Do not push off or pull toward any object
outside of the platform.

Model Application

S1212EH Indoor 400N 3

S1412-EHXC Indoor 400N 2

Outdoor 200N 1

S0608E

Indoor 400N 2

S0808E Indoor 400N 2

Outdoor 400N 2

S0812E

Indoor 400N 2

Outdoor 200N 1

S1012E

Indoor 400N 2

S1212E Indoor 400N 3

S1412-EXC Indoor 400N 2

Do not use the machine as a crane.

Do not place or attach fixed or overhanging
loads to any part of this machine.

Do not push the machine or other objects with
the platform.

Do not operate the machine with the chassis
trays open.

manual

force

Maximum

occupants

Maximum allowable manual force

Model Application

Outdoor 200N 1

S0608EH

Indoor 400N 2

S0808EH Indoor 400N 2

Outdoor 400N 2

S0812EH

Indoor 400N 2

Outdoor 200N 1

S1012EH

Indoor 400N 2

manual

force

Maximum

occupants

Do not contact adjacent structures with the
platform.

Do not alter or disable the limit switches.

Do not tie the platform to adjacent structures.

Do not place loads outside the platform
perimeter.

Do not alter or disable machine components
that in any way affect safety and stability.

Do not replace items critical to machine

4

OPERATOR’S MANUAL with Maintenance Information

Safety Rules

stability with items of different weight or
specification.

Do not use batteries that weigh less than the
original equipment. Batteries are used as
counterweight and are critical to machine
stability. Each battery must weigh 28 kg. The
batteries must weigh a minimum of 112 kg.
(For S0608EH/S0608E, S0808EH/S0808E,
S0812EH/S0812E); Each battery must weigh
30 kg. The batteries must weigh a minimum of
120 kg (For S1012EH/S1012E); Each battery
must weigh 37 kg. The batteries must weigh a
minimum of 148 kg (For S1212EH/S1212E,
S1412-EHXC/S1412-EXC).

Do not modify or alter an aerial work platform
without prior written permission from the
manufacturer. Mounting attachments for
holding tools or other materials onto the
platform, toe boards or guard rail system can
increase the weight in the platform and the
surface area of the platform or the load.

Do not place ladders or scaffolds in the
platform or against any part of this machine.

Operation on Slopes Hazard

Do not drive the machine on a slope that
exceeds the slope and side slope rating of the
machine.

Slope rating applies to machines only in the
stowed position.

Maximum slope rating stowed

Maximum side slope rating stowed

Model A B

S0608EH 25% (14°) 25% (14°)

Do not transport tools and materials unless
they are evenly distributed and can be safely
handled by person(s) in the platform.

Do not use the machine on a moving or mobile
surface or vehicle.

Be sure all tires are in good condition, air-filled
tires are properly inflated and lug nuts are
properly tightened.

Crushi ng Hazard

Keep hands and limbs out of scissors.

Keep hands clear when folding rails.

Maintain a firm grasp on the platform rail when
removing the rail pins. Do not allow the
platform guard rails to fall.

Use common sense and planning when
operating the machine with the controller from
the ground. Maintain safe distances between
the operator, the machine and fixed objects.

S0808EH 25% (14°) 25% (14°)
S0812EH 25% (14°) 25% (14°)
S1012EH 25% (14°) 25% (14°)
S1212EH 25% (14°) 25% (14°)

S1412-EHXC 25% (14°) 25% (14°)

S0608E 25% (14°) 25% (14°)
S0808E 25% (14°) 25% (14°)
S0812E 25% (14°) 25% (14°)
S1012E 25% (14°) 25% (14°)
S1212E 25% (14°) 25% (14°)

S1412-EXC 25% (14°) 25% (14°)

Note: Slope rating is subject to ground
conditions and adequate traction.

5

OPERATOR’S MANUAL with Maintenance Information

Safety Rules

Fall Hazard

The guard rail system provides fall protection.
During operation, occupants in the platform
must wear a full body harness with a lanyard
attached to an authorized lanyard anchorage
point. Attach only one (1) lanyard per lanyard
anchorage point.

Do not sit, stand or climb on the platform guard
rails. Maintain a firm footing on the platform
floor at all times.

Be aware of crushing hazards when grasping
the platform guard rail.

Operators must comply with employer, job site
and governmental rules regarding use of
personal protective equipment.

Observe and use color-coded direction arrows
on the platform controls for drive and steer
functions.

Do not climb down from the platform when
raised.

Keep the platform floor clear of debris.

Close the entry gate before operating.

Do not operate the machine unless the guard
rails are properly installed and the entry is
secured for operation.

Do not enter or exit the platform unless the
machine is in the stowed position.

Collision Hazard

Be aware of limited sight distance and blind
spots when driving or operating.

Be aware of extended platform position(s)
when moving the machine.

Do not operate a machine in the path of any
crane or moving overhead machinery unless
the controls of the crane have been locked out
and/or precautions have been taken to prevent
any potential collision.

No stunt driving or horseplay while operating a
machine.

Do not lower the platform unless the area
below is clear of personnel and obstructions.

Limit travel speed according to the condition of
the ground surface, congestion, slope, location
of personnel, and any other factors which may
cause collision.

Component Da mage Hazard

Check the work area for overhead obstructions
or other possible hazards.

Do not use any battery charger greater than
24V to charge the batteries.

Do not use the machine as a ground for
welding.

6

OPERATOR’S MANUAL with Maintenance Information

Explosion and Fire Hazard

Do not operate the machine or charge the
batteries in hazardous locations where
potentially flammable or explosive gases or
particles may be present.

Damaged Machine Hazard

Do not use a damaged or malfunctioning
machine.

Conduct a thorough pre-operation inspection
of the machine and test all functions before
each work shift. Immediately tag and remove
from service a damaged or malfunctioning
machine.

Safety Rules

Batteries contain acid. Always wear protective
clothing and eye wear when working with
batteries.

Avoid spilling or contacting battery acid.
Neutralize battery acid spills with baking soda
and water.

Explosion Hazard

Be sure all maintenance has been performed
as specified in this manual.

Be sure all decals are in place and legible.

Be sure the operator’s manual is complete,
legible and in the storage container located in
the platform.

Bodily Injury Hazard

Do not operate the machine with a hydraulic oil
or air leak. An air leak or hydraulic leak can
penetrate and/or burn skin.

Improper contact with components under any
cover will cause serious injury. Only trained
maintenance personnel should access
compartments. Access by the operator is only
advised when performing a pre-operation
inspection. All compartments must remain
closed and secured during operation.

Battery Safety

Burn Hazard

Keep sparks, flames and lighted tobacco away
from batteries. Batteries emit explosive gas.

The battery tray should remain open during the
entire charging cycle.

Do not contact the battery terminals or the
cable clamps with tools that may cause
sparks.

Component Damage Hazard

Do not use any battery charger greater than
24V to charge the batteries.

Electrocution/ Burn Hazard

Connect the battery charger to a grounded,

AC 3-wire electrical outlet
only.

Inspect daily for damaged
cords, cables and wires.
Replace damaged items
before operating.

Avoid electrical shock from contact with
battery terminals. Remove all rings, watches
and other jewelry.

7

OPERATOR’S MANUAL with Maintenance Information

Safety Rules

Tip-over Hazard

Do not use batteries that weigh less than the
original equipment. Batteries are used as
counterweight and are critical to machine
stability. Each battery must weigh 28 kg. The
batteries must weigh a minimum of 112 kg.
(For S0608EH/S0608E, S0808EH/S0808E,
S0812EH/S0812E); Each battery must weigh
30 kg. The batteries must weigh a minimum of
120 kg (For S1012EH/S1012E); Each battery
must weigh 37 kg. The batteries must weigh a
minimum of 148 kg (For S1212EH/S1212E,
S1412-EHXC/S1412-EXC).

Lifting Hazard

Use the appropriate number of people and
proper lifting techniques when lifting batteries.

Lockout after Each Use

1 Select a safe parking location - firm level

surface, clear of obstruction and traffic.

2 Lower the platform.

3 Turn the key switch to the off position and

remove the key to secure from
unauthorized use.

4 Push in the red Emergency Stop buttons to

“off” position.

5 Push in the main power switch to “off”

position

6 Chock the wheels.

7 Charge the batteries.

8

OPERATOR’S MANUAL with Maintenance Information

Legend

Legend

18

17

14

3

4

5

6

7

8

9

10

11

12

13

2

1

16

15

1 Platform extension

2 Manual storage container

3 Platform control

4 Lanyard anchorage point

5 Platform guard rails

6 Platform extension release pedal

7 Main platform

8 Platform entry gate

9 Scissor arms

10 Lift cylinder

11 Ground controls (on opposite side of

machine)

12 Entry ladder

13 Brake release pump

14 Non-steer tire

15 Battery charger

16 Pothole guard

17 Steer tire

18 Safety arm

9

OPERATOR’S MANUAL with Maintenance Information

Decals

Deca l Inspection

Use the pictures on the next page to verify that all decals are legible and in place.

Below is a numerical list with quantities and descriptions.

No. Part No. Description Qty. Remark

1 09440011 Decal, Label-Lanyard anchorage point 4

2 09340001 Decal, Notice-Keep the manual with the machine 1

3 09440001 Decal, Danger-General safety rules 1

4 09440003 Decal, Danger-Tip-over hazard, tilt-alarm 1

5 09340003

09440013 Decal, Label-Capacity 380kg 1 S0608EH/S0608E

09440014 Decal, Label-Capacity 230kg 1 S0808EH/S0808E

09440015 Decal, Label-Capacity 450kg 1 S0812EH/S0812E

6

09440016 Decal, Label-Capacity 320kg 1 S1012EH/S1012E

09440017 Decal, Label-Capacity 320kg 1 S1212EH/S1212E

09440038 Decal, Label-Capacity 250kg 1

7 09440005 Decal, Warning-Use indoors only 1

8 09210015 Nameplate, Manufacturer serial number 1

9 09310001 Decal, Instructions-Forklift pockets 2

10 09310003 Decal, Instructions-Tie down point 4

Decal, Instructions-Refer the operator to the
instructions for use

2

S1412-EHXC/S1412

-EXC
S0808EH/S0808E
S1212EH/S1212E
S1412-EHXC/S1412

-EXC

11 09310002 Decal, Instructions-Lift point 4

09310008

09310010 Decal, Instructions-Maximum wheel load: 960kg 4 S0808EH/S0808E

09310012 Decal, Instructions-Maximum wheel load: 1240kg 4 S0812EH/S0812E

12

09310014 Decal, Instructions-Maximum wheel load: 1310kg 4 S1012EH/S1012E

09310016 Decal, Instructions-Maximum wheel load: 1280kg 4 S1212EH/S1212E

09310018 Decal, Instructions-Maximum wheel load: 1350kg 4

Decal, Instructions-Maximum wheel load: 1000kg 4 S0608EH/S0608E

S1412-EHXC/S1412

-EXC

10

OPERATOR’S MANUAL with Maintenance Information

Decals

No. Part No. Description Qty. Remark

13 09310006 Decal, Notice-Main power switch operation 1

14 09540001 Decal, Label-CE 3

15 09410001 Decal, Danger-Explosion/burn hazard 1

S0608EH/S0608E

09430003 Decal, Danger-Keep away from moving parts 3

16

09430003 Decal, Danger-Keep away from moving parts 5

09430001 Decal, Danger-Safety arm 2

17

09430001 Decal, Danger-Safety arm 4

09640030 Decal, Cosmetic-S0608EH 2 S0608EH

09640031 Decal, Cosmetic-S0608E 2 S0608E

S0808EH/S0808E
S0812EH/S0812E
S1012EH/S1012E

S1212EH/S1212E
S1412-EHXC/S1412

-EXC

S0608EH/S0608E
S0808EH/S0808E
S0812EH/S0812E
S1012EH/S1012E

S1212EH/S1212E
S1412-EHXC/S1412

-EXC

09640032 Decal, Cosmetic-S0808EH 2 S0808EH

09640033 Decal, Cosmetic-S0808E 2 S0808E

09640034 Decal, Cosmetic-S0812EH 2 S0812EH

09640035 Decal, Cosmetic-S0812E 2 S0812E

18

09640036 Decal, Cosmetic-S1012EH 2 S1012EH

09640037 Decal, Cosmetic-S1012E 2 S1012E

09640038 Decal, Cosmetic-S1212EH 2 S1212EH

09640039 Decal, Cosmetic-S1212E 2 S1212E

09640079 Decal, Cosmetic-S1412-EHXC 2 S1412-EHXC

09640080 Decal, Cosmetic-S1412-EXC 2 S1412-EXC

09440009

19

09440007 Decal, Caution-Max. manual force 400N 2

Decal, Caution-Max. manual force 400N
(Indoor)200N (Outdoor)

S0608EH/S0608E

2

S1012EH/S1012E

S0808EH/S0808E
S0812EH/S0812E
S1212EH/S1212E
S1412-EHXC/S1412

-EXC

11

OPERATOR’S MANUAL with Maintenance Information

Decals

No. Part No. Description Qty. Remark

S0608E, S0808E,

09940003 Decal, Label-E-Tech 2

20

09940004 Decal, Label-Summit 2

20 09410005 Decal, Danger-Do not alter or disable limit switch 1

21 09310004 Decal, Instructions-Emergency lower 1

22 09410003 Decal, Warning-Inspected and operation properly 1

S0812E, S1012E,
S1212E, S1412E

S0608EH, S0808EH
S0812EH, S1012EH
S1212EH,
S1412-EHXC

12

OPERATOR’S MANUAL with Maintenance Information

Decals

4

3

2

1

20

5

1

20

19

18

1

1

19

6

Safety tape

16

14

18

17

16

12

15

14

13

12

9

10

11

11

7

8

9

10

17

21

10

12

14

5

23

22

12

11

10

11

16

13

OPERATOR’S MANUAL with Maintenance Information

Decals

14

OPERATOR’S MANUAL with Maintenance Information

Decals

15

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S0608EH

Height, working maximum 8 m

Height, platform maximum 6 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 0.83 m

Length, platform retracted 2.48 m

Length, platform extended 3.38 m

Platform dimensions
Platform length × width

2.23 m

1.87 m

2.27×0.81 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 380 kg

Maximum wind speed 12.5 m/s

Wheelbase 1.87 m

Turning radius (outside) 2.10 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 6V 225AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°,Y-3°

Drive speeds

Stowed, maximum 3.5 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 1000 kg

Tire contact pressure 11.1 kg/cm

1086.9 kPa

Occupied floor pressure 1339 kg/m

13.1 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

16

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S0808EH

Height, working maximum 10 m

Height, platform maximum 8 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 0.83 m

Length, platform retracted 2.48 m

Length, platform extended 3.38 m

Platform dimensions
Platform length × width

2.36 m

2.00 m

2.27×0.81 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 230 kg

Maximum wind speed 0 m/s

Wheelbase 1.87 m

Turning radius (outside) 2.1 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 6V 225AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°,Y-3°

Drive speeds

Stowed, maximum 3.5 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 960 kg

Tire contact pressure 10.7 kg/cm

1045 kPa

Occupied floor pressure 1287.4 kg/m

12.6 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

17

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S0812EH

Height, working maximum 10 m

Height, platform maximum 8 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 1.15 m

Length, platform retracted 2.48 m

Length, platform extended 3.38 m

Platform dimensions
Platform length × width

2.36 m

1.83 m

2.27×1.12 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 450 kg

Maximum wind speed 12.5 m/s

Wheelbase 1.87 m

Turning radius (outside) 2.2 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 6V 225AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°, Y-3°

Drive speeds

Stowed, maximum 3.5 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 1240 kg

Tire contact pressure 12.1 kg/cm

1182.6 kPa

Occupied floor pressure 1174.1 kg/m

11.5 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

18

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S1012EH

Height, working maximum 12 m

Height, platform maximum 10 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 1.15 m

Length, platform retracted 2.48 m

Length, platform extended 3.38 m

Platform dimensions
Platform length × width

2.49 m

1.96 m

2.27×1.12 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 320 kg

Maximum wind speed 12.5 m/s

Wheelbase 1.87 m

Turning radius (outside) 2.2 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 6V 240AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°,Y-3°

Drive speeds

Stowed, maximum 3.5 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 1310 kg

Tire contact pressure 12.9 kg/cm

1259.7 kPa

Occupied floor pressure 1250.7 kg/m

12.3 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

19

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S1212EH

Height, working maximum 13.8 m

Height, platform maximum 11.8 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 1.19 m

Length, platform retracted 2.48 m

Length, platform extended 3.38 m

Platform dimensions
Platform length × width

2.62 m

2.09 m

2.27×1.12 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 320 kg

Maximum wind speed 0 m/s

Wheelbase 1.87 m

Turning radius (outside) 2.2 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 12V 300AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°,Y-3°

Drive speeds

Stowed, maximum 3.5 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 1280 kg

Tire contact pressure 11.1 kg/cm

1083.7 kPa

Occupied floor pressure 1169.8 kg/m

11.5 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

20

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S1412-EHXC

Height, working maximum 15.7 m

Height, platform maximum 13.7 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 1.25 m

Length, platform retracted 2.84 m

Length, platform extended 3.74 m

Platform dimensions
Platform length × width

2.62 m

2.09 m

2.64×1.12 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 250 kg

Maximum wind speed 0 m/s

Wheelbase 2.22 m

Turning radius (outside) 2.65 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 12V 300AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°,Y-3°

Drive speeds

Stowed, maximum 3.5 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 1350 kg

Tire contact pressure 11.7 kg/cm

1142 kPa

Occupied floor pressure 1013.1 kg/m

9.9 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

21

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S0608E

Height, working maximum 8 m

Height, platform maximum 6 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 0.83 m

Length, platform retracted 2.48 m

Length, platform extended 3.38 m

Platform dimensions
Platform length × width

2.23 m

1.87 m

2.27×0.81 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 380 kg

Maximum wind speed 12.5 m/s

Wheelbase 1.87 m

Turning radius (outside) 2.1 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 6V 225AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°,Y-3°

Drive speeds

Stowed, maximum 4.0 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 1000 kg

Tire contact pressure 11.3 kg/cm

1104.6 kPa

Occupied floor pressure 1360.7 kg/m

13.3 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

22

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S0808E

Height, working maximum 10 m

Height, platform maximum 8 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 0.83 m

Length, platform retracted 2.48 m

Length, platform extended 3.38 m

Platform dimensions
Platform length × width

2.36 m

2.00 m

2.27×0.81 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 230 kg

Maximum wind speed 0 m/s

Wheelbase 1.87 m

Turning radius (outside) 2.1 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 6V 225AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°,Y-3°

Drive speeds

Stowed, maximum 4.0 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 960 kg

Tire contact pressure 10.8 kg/cm

1062.7 kPa

Occupied floor pressure 1309.1 kg/m

12.8 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

23

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S0812E

Height, working maximum 10 m

Height, platform maximum 8 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 1.15 m

Length, platform retracted 2.48 m

Length, platform extended 3.38 m

Platform dimensions
Platform length × width

2.36 m

1.83 m

2.27×1.12 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 450 kg

Maximum wind speed 12.5 m/s

Wheelbase 1.87 m

Turning radius (outside) 2.2 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 6V 225AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°,Y-3°

Drive speeds

Stowed, maximum 4.0 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 1240 kg

Tire contact pressure 12.2 kg/cm

1198 kPa

Occupied floor pressure 1189.4 kg/m

11.7 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

24

OPERATOR’S MANUAL with Maintenance Information

2

2

2

q

Specifications

Model: S1012E

Height, working maximum 12 m

Height, platform maximum 10 m

Height, stowed maximum
Rails up

Height, stowed maximum
Rails folded

Width 1.15 m

Length, platform retracted 2.48 m

Length, platform extended 3.38 m

Platform dimensions
Platform length × width

2.49 m

1.96 m

2.27×1.12 m

Maximum hydraulic pressure

240 bar

(functions)

System voltage 24 V

Tire size Φ381×127 mm

Airborne noise emissions <70 dB

Maximum sound level at normal operating
workstations (A-weighted)

Vibration value does not exceed 2.5m/s

Maximum slope rating,
Stowed position

Maximum side slope rating,
Stowed position

25%

25%

Platform extension length 0.9 m

Maximum load capacity 320 kg

Maximum wind speed 12.5 m/s

Wheelbase 1.87 m

Turning radius (outside) 2.2 m

Turning radius (inside) 0 m

Ground clearance 10 cm

Ground clearance

1.9 cm

Pothole guards deployed

Weight

（See Serial Label）

Machine weights vary with option configurations

Power source 4 Batteries , 6V 240AH

Controls Proportional

AC outlet in platform Standard

Note: Slope rating is subject to ground
conditions and adequate traction.

Maximum working slope X-1.5°,Y-3°

Drive speeds

Stowed, maximum 4.0 km/h

Platform raised, maximum 0.8 km/h

Floor loading information

Tire load, maximum 1310 kg

Tire contact pressure 12.9 kg/cm

1267.4 kPa

Occupied floor pressure 1258.4 kg/m

12.3 kPa

Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with

uate safety factors.

ade

Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.

25