Dingheng DHM-15B User Manual

DHM-15B HEIGHT AND WEIGHT MACHINE

Model: DHM-15B

Ultrasonic Electronic Height and Weight Body Scale

USER

MANUAL

Installation and Adjustment

THANKS FOR USING OUR HEALTHCARE PRODUCTS

DHM-15B HEIGHT AND WEIGHT MACHINE

1

First: Open the packaging bag and check all the components.

Second: Connect mainframe and saddle with M8 screw (picture1), insert the sensor to

Mainframe-

Saddle-

Picture 1 Picture 2

Height sensor

Blood

Pressure

Picture 3 picture 4 picture 5 picture 6

Installment instruction:

DHM-15B HEIGHT AND WEIGHT MACHINE

2

the bottom of the saddle. (picture2)

Third: Insert height-measuring component to the two holes on the top of the

mainframe, then fix them with four M4 screws. Then connect the wire of the

height-measuring component with the mainframe. (picture6)

Diagram of the main board:

 Operation

Startup: Connect the power wire and switch on; the screen will display the

information of beginning. The height screen will display 0122 which refers to the

date.The weight screen will display 17:30which refers to the time.

Attention: Make sure that the voltage of the power source is 12V and nothing on the

saddle.

Measurement: the scale enters into the measurement state when puts in fixed number

of coins. The scale begins to measure the height and weight after person standing on

the saddle. After the measurement of height and weight, some sound will hint you.

DHM-15B HEIGHT AND WEIGHT MACHINE

3

The results can be spoken out and printed.

(Please refer to the measuring diagram as follows)

First Second Third Fourth

Please pay attention when measuring:

First: Put the coin. After entering into the measuring state, if there is no measuring in

20 seconds (nothing on saddle), the scale will exit measuring state

automatically.

Second: Measure height and weight. Standing stable and do not move or speak to get

an accurate result.

Third: Measure blood pressure and pulse. After measuring height and weight, put

right arm in the arm hole of the blood pressure meter, and then press the key on

the left side of shell. The machine begins to measure. It takes a while to

measure. During the process, please relax yourself and do not move or speak to

get an accurate result. If it fails, press the key again and measure again. The

entire measuring process finishes after the results showing on the screen.

Attention: If there is no blood pressure button in 30 seconds, or Press the

button for 2 seconds, the machine will exit the measurement.

Fourth: Take the print ticket.

Pronunciation: It can speak out the measurement results automatically (also can be

set without pronunciation), under the state of waiting they can speak out welcome