Dinex TVL2T1D10 Installation Manual
TVL Economy Series Cart
Operating & Maintenance Manual
Models: TVL2T1D10
TVL2T1D12
TVL2T1D14
TVL2T1D16
TVL2T1D18
TVL2T1D20
TVL Economy Series Cart:
SECTION 1: INTRODUCTION
Introduction ..............................................................................2
Freight Damage Claims plate ..................................................2
SECTION 2: INFORMATION
Information...............................................................................2
Identification Plate ...................................................................2
For Service Information call 1.888.673.4639
Please provide following information:
• Designation number
• Identification number
TVL2T1D10
Shown with optional 3-sided top rail
SECTION 3: MAINTENANCE & OPTIONS
Rack Adjustments ..................................................................3
Top Rail Installation ................................................................3
Pass Thru Door Option Installation ........................................4
Cleaning ..................................................................................5
SECTION 4: EXPLODED VIEW
Rack Adjustments ..................................................................6
WARRANTY ............................................................................7
DINEX
4711 E. Hefner Rd. (73131) • PO Box 53006 • Oklahoma City, OK 73152-3006
(800) 654-8210 • Fax (800) 872-4701 • www.dinex.com
DO NOT DISCARD
Manual No. TVL Cart
TVL Cart | 2
INTRODUCTION
Congratulations! You have just purchased one of the nest pieces of
equipment on the market today. Before installing or operating your
new Dinex equipment you should read through this material. This
manual should be retained for further reference as it contains operation
instructions and warranty information. Should you have any questions
concerning the Equipment, please call the 24/7 Dinex Hotline at 1-888673-4639.
IMPORTANT: For your safety, read and follow all cautions,
information, and warnings.
!
FREIGHT DAMAGE CLAIMS
Your TVL Series Cart was carefully inspected and packed before leaving
our factory. The transportation company assumes full responsibility for
the safe delivery of this equipment. Dinex cannot assume responsibility
for damage or loss incurred during transit. Visible damage or loss
should be noted on the freight bill and signed by the person
making the delivery.
A freight claim should be led immediately with the transportation
company. If damage is unnoticed or concealed until the equipment is
unpacked, notify the transportation company immediately and tell them
you want to le a concealed damage claim. This must be done within
fteen (15) days after delivery was made. Be sure to retain all packing
materials and cartons.
IMPORTANT: All packing materials should be retained for return
shipment.
!
INFORMATION
INFORMATION ON THIS SECTION
When contacting service please provide the following information
located on the product identication plate:
• Model number
• Serial number of the equipment (identication plate)
• Description of the part
• See Manual for item number
IDENTIFICATION PLATE
Different serial numbers for each unit.
APPLICATION AND USE
The Equipment is for commercial use in the food service industry.
ATTENTION: Installation of this equipment should be performed
only by persons qualied or licensed to install electrical equipment.
!
• Adjustments and service work should be performed only by
qualied service technicians.
• This equipment is intended for commercial use only. Not for
household use.
• Use of other than genuine Dinex replacement parts or service
work performed by those other than authorized Dinex service
agents will void the warranty.
• Do not use corrosive or chlorinated cleaners on the equipment.
Use only mild detergents.
SAFETY
The instructions contained in this manual provide important guidelines
for the Equipment user regarding a correct and safe installation.
Particular attention should be paid to the warnings given in various parts
of this manual.
TVL Cart | 3
MAINTENANCE AND OPTIONS
RACK ADJUSTMENTS
The TVL Cart has the built in ability to have the racks adjusted in intervals of 1.69 inches to allow for the use of taller or shorter trays.
To remove a rack lift up on rack slide and then rotate it 90° upward and pull out from the side bar. To install in the desired location simply reverse this
procedure. (See Figure 1)
Figure 1
SHELF BRACKET ADJUSTMENT/REMOVAL DETAIL
REP. QTY. DESCRIPTION REFERENCE
1 1 SHELF BRACKET DX16505-3802
TOP RAIL OPTION INSTALLATION
The TVL Cart comes with the option of eld installing a 3-sides Top Rail.
Step 1: The TVL cart is delivered with 5/16-18 Flat Head slotted screws and nuts installed in the 4 top rail mounting holes. Remove this hardware using
a standard at blade screwdriver and 3/8” wrench and discard.
Step 2: Assemble the top rails as indicated and attach to the top from the inside of the cabinet through the predrilled holes with the M10-20 bolts and
washers supplied in the kit using a 15mm socket or wrench. (See Figure 2)
Figure 2
3-SIDED TOP ASSEMBLY DETAIL
REP. QTY. DESCRIPTION REFERENCE
1 2 END RAIL SUPPORT DX18617-0053
2 2 SIDE RAIL DX16050-0461
3 1 FRONT/REAR RAIL DX16050-0462
4 2 CORNER RAIL SUPPORT DX18617-0052
5 4 WASHERS, SS, M10 DX18121-0077
6 4 BOLT, SS, M10-20 X 19 mm DX18058-0093
Loading...