DINA DN3PD1 Original Instruction Manual
DN3PD1
Original Instruction Manual
valid for ID-No: 33PD02
Safety switchgear
to monitor the speed of three-phase and
single-phase motors without sensor
we are safety.
18-09-27 / 33pd02-V0743 3
EU-Konformitätserklärung
EC-Declaration of Conformity
DINA Elektronik GmbH
Esslinger Str. 84
72649 Wolfschlugen
Germany
Phone +49 7022 95170
Fax +49 7022 9517700
info@dina.de
www.dina.de
Wir erklären, dass folgendes Produkt die einschlägigen Harmonisierungsrechtsvorschriften der Union erfüllt.
We declare that the following product is in conformity with the relevant Union harmonization legislation.
Produkt/ product
Beschreibung/ Description
DN3PD1
Sicherheitsschaltgerät zur sensorlosen Drehzahlüberwa-
chung bei Ein- und Dreiphasen Motoren
Safety switchgear unit to monitor the speed of 3-phases
and single phase motors without sensor
EU-Richtlinien/ EC- directives
Angewandte Normen/ Applied standards
2006/42/EG Maschinenrichtlinie/ Machinery-Directive
2014/30/EU EMV-Richtlinie/ EMC-Directive
2011/65/EU RoHS Richtlinie/ RoHS-Directive
EN ISO 13849-1: 2015
IEC 62061: 2015
IEC 61800-5-2: 2016
IEC 61508: Parts 1-7:2010
EN 50178: 1997
EN 60204-1: 2006 + A1:2009 + AC:2010
EN 60947-5-1:2010
EN 61326-1: 2013
EN 61326-3-1: 2008 + Entwurf 2015 SIL3
GS-ET-20: 2016-10
Notifizierte Stelle
Notified Body
EG Baumusterprüfbescheinigung
EC Type Test
TÜV Rheinland Industrie Service GmbH
Am Grauen Stein
51105 Köln
Germany
NB 0035
Reg.-Nr.: /No.: 01/205/5650.01/18
Wolfschlugen, 24.07.2018
Dirar Najib
CEO
DN3PD1
Inhaltsverzeichnis
4 18-09-27 / 33pd02-V0743
Content
1
Intended Use 6
Approvals 6
Safety parameters 6
Ordering data 6
2 Safety regulations 7
3 Important information and validation 7
4 Function description 8
Switching threshold 8
Start-up monitoring 8
Minimum switch-off time 8
Acknowledge function 8
Functional diagram 9
Schematic, operating element and display 10
Terminal description 10
5 Applications 11
Motor with frequency converter 11
Motor with star-delta circuit 11
Single-phase motor 11
6 Mounting and removal 11
Wiring 12
Commissioning 12
Example of application 12
7 Parameterization of the switching thresholds 13
Important notes for parameterization 13
Table of frequencies 13
Configuration of the switching threshold and acknowledgement 14
Example for configuration 15
8 Diagnostics 16
Error report 16
9 Technical data 17
Ambient conditions 17
Input data 17
Output data 17
General data 17
Connection data 17
Relay load curve 18
10 Dimensions 18
DN3PD1
18-09-27 / 33pd02-V0743 5
Always read the additional applicable online documentation before working on/with the safety
switchgear. Make sure you always work with the valid documentation. This is available online at
http://www.dina.de/downloads/
Dispose of the device according to the national environmental regulations.
Symbol and Notes:
WARNING
Observe the safety regulations and installation notes in the corresponding section.
INFO
Observe the notes in the corresponding section.
Version overview / Change history
Version
Date
valid for ID-No
Innovations / changes
0743
2018-09-27
33PD02
DN3PD1
Intended Use
6 18-09-27 / 33pd02-V0743
1 Intended Use
• Safety switchgear to monitor the speed of three-phase and single-phase motors without sensor.
• Two speed thresholds are possible: minimum speed and maximum speed.
• The unit meets Cat. 4/ PL e acc. to ISO 13849-1, SIL (CL) 3 acc. to IEC 62061 and IEC 61508.
• Usage in safety current circuit according to VDE 0113 T.1
Approvals
Safety parameters
The unit meets Cat. 4/ PL e and SIL (CL) 3.
Parameter
Value
Note
PFH
1,56 E-09 1/h
1,6 % von SIL 3
MTTFd
553 a
HIGH
DC
avg
95%
(HIGH)
table 1-1: Safety parameters
Ordering data
Description
Type
ID-No.:
Speed monitoring, sensorless 0-600Hz, 2 contact outputs,
start-up monitoring
DN3PD1 33PD02
Loading...