Dimplex QXD1500, QXD3000, QXD4500 Installation And Operating Instructions Manual

Installation and Operating Instructions

Tel:

+44

(0)191 490 1547

Fax:

[phone]

Email:

[e-mail]

Website: www.heattracing.co.uk

www.thorneanderrick.co.uk

Models Covered:

QXD1500

QXD3000

QXD4500 08/50866/2 Issue 2

IMPORTANT

SPECIFICATIONS

These instructions should be read and carefully retained by the user. ∗

The installation of these appliances must always be carried out by a competent ∗
electrician and be in accordance with the current wiring regulations and relevant
Building Regulations.

The radiated heat from the heater is considerable and must be taken into account ∗
when locating the heater. Ensure that the heater is not used in close proximity to
the skin or eyes.

Always isolate the heater from the supply before undertaking any maintenance ∗
work on the appliance.

The QXD range of heaters are designed for internal use only. They are not rated as ∗

ame-proof and must not be used when ammable dusts, gases, or vapours, etc.
are likely to be present in the atmosphere. If in doubt, advice should be sought
from the Health and Safety Executive inspectors or local re ofcers.

Quartz lamps are extremely fragile and must be handled with extreme care at all ∗

times. Avoid touching the surface of the quartz sleeve with bare ngers. If the
sleeve is accidentally touched remove the nger print with a soft cloth moistened

with methylated spirits.

This heater must not be located immediately above or below a xed socket outlet ∗

or connection box.

The life expectancy of the halogen lamps in normal operating conditions is over ∗
3000 hours.

The heater must be installed in a location that is free from vibration. ∗

WARNING – THIS APPLIANCE MUST BE EARTHED.

The Dimplex QXD range is available in 1,2 and 3 lamp models with outputs of 1.5kW,

3.0kW and 4.5kW respectively. The three lamp models are supplied as dual voltage units
and are suitable for use on 230-240V and 415V 3N supplies.

General Data:

Model No. No. of Lamps Rating

QXD1500
QXD3000
QXD4500

Material and Finished

Body Casing – Low carbon steel, powder coated.

Reectors – 1080 (SIA) 99.8% Alum. Electrochemically brightened specular nish.

1
2
3

DIMENSIONS QXD1500/1500ND/1500G

All dimensions in mm

(kW)

1.5

3.0

4.5

Voltage

(V)

230-240
230-240
230-240

Weight

(kg)

3.7

4.3

5.8

QXD3000

All dimensions in mm

UNIVERSAL BRACKET MOUNTING

ANGLE ADJUSTMENTS

QXD4500

4 FIXING HOLES

WIRING DIAGRAMS

G/Y = GREEN/YELLOW

R = RED

B = BLACK

QXD1500 QXD3000

QXD4500

LINKS MUST
BE FITTED

LINKS MUST
BE REMOVED

HEATER WIRING
AS OPPOSITE

CABLE ALL MODELS 2.5MM2

SILICONE INSULATED

(a) External connections for 230/240V 1pH (b) External connections for 415V 3N