Dimplex Power Chef, Power Chef BBQ-HDC Installation And Operation Manual

Installation and
Operation

BBQ-HDC
Hot Dog Roller Kit

7210240100rev00

IMPORTANT SAFETY INFORMATION: Always read this manual rst

before attempting to install or use this accessory. For your safety, always
comply with all warnings and safety instructions contained in this manual
to prevent personal injury or property damage.

For the complete line of electric BBQs and accessories contact your
authorized Dimplex dealer or visit us on the web at

www.dimplexoutdoors.com.

2 www.dimplex.com

Installation

1

2

14mm

!

NOTE: Align shelf with

hood before tightening.

3

Reverse View

!

NOTE: Align top and bottom slot

on back of motor with edges of
Mounting Bracket and slide forward.

3

Installation

4

5

!

NOTE: To assist with inserting shaft into Hot Dog Roller Motor, plug

in and turn motor on. The motor operates at a low speed and will
safely catch on the squared edges of the Hot Dog Roller Shaft.

!

NOTE: Remove all Hot Dog

Roller packaging material,
hand wash in warm soapy
water and rinse thoroughly

before rst use.

4 www.dimplex.com

Operation

Hot Dog Roller Accessory

Before rst use, remove all

packing material from Hot Dog
Roller. Hand wash in warm,
soapy water, rinse and dry
thoroughly.

Install the Hot Dog Roller and
Motor. Once installed, plug the
Hot Dog Roller Motor power cord
into either the Outlet Accessory
(sold separately) or a nearby
electric wall socket.

!

NOTE: If Skillet (sold

separately) and Hot Dog Roller
accessories are to be used
simultaneously, install Hot Dog

Roller rst. Hot Dog Roller

requires installation directly
from the side (see step 5) to
prevent damage to the motor.

CAUTION: To avoid burns

to skin, do not install any
accessory while grill is hot or
operating. Allow grill to cool
for at least 15 minutes before
adding any cooking accessory.

Figure 1

Instructions for Cooking

Ensure power is supplied to 1.
the PowerChef

®

electric grill.

Plug Hot Dog Roller Motor into 2.
Outlet Accessory or electric
wall socket and turn Hot Dog
Roller Motor On/Off Switch
(Figure 1) to On (“ I “ position).

Press the ON/SELECT button 3.
on the electric grill, PREHEAT

icon is ashing on the display.

Press the ON/SELECT button 4.
again to start the 8 (eight)
minute preheat.

When the preheat function 5.
ends an alarm will sound, the
PREHEAT icon disappears
and the PLACE icon appears.

Press the up and down arrow 6.
buttons to adjust Power Level
to desired setting.

Place hot dogs on roller and 7.
cook until desired tenderness

On/Off

Switch

5

Operation

and wellness is reached.

Press the OFF button to 8.
shut grill off once cooking is
completed.

Approximate cook times
(in minutes):

Regular size hot dogs: 8-12

Jumbo size hot dogs: 10-15

!

NOTE: Cook times assume a

preheated grill.

CAUTION: To avoid burns

to skin, allow grill and roller
to cool for a minimum of 15
minutes before removing roller
for cleaning.

Maintenance

Cleaning tips:

After use, allow Hot Dog Roller •
to cool to room temperature
before attempting to wash.

Hand wash with hot soapy •
water, rinse with warm water
and towel dry.

6 www.dimplex.com

Products to which this limited warranty
applies

This limited warranty applies to newly
purchased Dimplex electric grill
accessories. This limited warranty applies
only to purchases made in any province
of Canada except for Yukon Territory,
Nunavut, or Northwest Territories or in
any of the 50 States of the USA (and the
District of Columbia) except for Hawaii and
Alaska. This limited warranty applies to
the original purchaser of the product only
and is not transferable.

Products excluded from this limited
warranty

Products purchased in Yukon Territory,
Nunavut, Northwest Territories, Hawaii,
or Alaska are not covered by this limited
warranty. Products purchased in these
States, provinces, or territories are sold
AS IS without warranty or condition of
any kind (including, without limitation,
any implied warranties or conditions of

merchantability or tness for a particular

purpose) and the entire risk of as to the
quality and performance of the products is
with the purchaser, and in the event of a
defect the purchaser assumes the entire
cost of all necessary servicing or repair.

What this limited warranty covers and for
how long

Products covered by this limited warranty
have been tested and inspected prior to
shipment and, subject to the provisions
of this warranty, Dimplex warrants such
products to be free from defects in
material and workmanship for a period of

90 days from the date of the rst purchase

of such product.

Warranty

The limited 90 day warranty period also
applies to any implied warranties that
may exist under applicable law. Some
jurisdictions do not allow limitations on
how long an implied warranty lasts, so
the above limitation may not apply to the
purchaser.

What this limited warranty does not cover

This limited warranty does not apply to
products that have been repaired (except

by qualied service representatives) or

otherwise altered. This limited warranty
does further not apply to defects
resulting from misuse, abuse, accident,
neglect, incorrect installation, improper
maintenance or handling, or operation with
an incorrect power source.
Dimplex will not be responsible for, and
the limited warranty shall not include,
any expense incurred for installation,
removal or repair of the product or part
(or any replacement product or part) or
transportation costs. Such costs shall be
the purchaser’s responsibility.

What you must do to get coverage under
this limited warranty

Defects must be brought to the attention of
Dimplex Technical Service by contacting
Dimplex at 1-888-DIMPLEX (1-888­346-7539), or 1367 Industrial Road,
Cambridge Ontario, Canada N1R 7G8.
Please have proof of purchase. Limited
warranty requires a proof of purchase of
the product.

What Dimplex will do in the event of a
defect

In the event a product or part covered
by this limited warranty is proven to be
defective in material or workmanship

7

during the 90 day limited warranty period
you have the following rights:

Dimplex will, at it’s sole discretion, •
choose to replace such defective
product or part, without charge. If
Dimplex is unable to replace such
product or part, or if Dimplex at it’s sole
discretion deems the replacement not
be commercially practical or cannot be
completed on a timely basis, Dimplex
may, in lieu of replacement, choose
to refund the purchase price for such
product or part.

The purchaser is responsible for •
removal, installation, repair and
transportation of such product or part
(and any replacement product or part)

What Dimplex and its dealers and service
agents are also not responsible for:

IN NO EVENT WILL DIMPLEX, OR ITS
DIRECTORS, OFFICERS, OR AGENTS,
BE LIABLE TO THE PURCHASER OR
ANY THIRD PARTY, WHETHER IN
CONTRACT, IN TORT, OR ON ANY
OTHER BASIS, FOR ANY INDIRECT,
SPECIAL, PUNITIVE, EXEMPLARY,
CONSEQUENTIAL, OR INCIDENTAL
LOSS, COST, OR DAMAGE ARISING
OUT OF OR IN CONNECTION WITH

THE SALE, MAINTENANCE, USE, OR
INABILITY TO USE THE PRODUCT,
EVEN IF DIMPLEX OR ITS DIRECTORS,
OFFICERS, OR AGENTS HAVE BEEN
ADVISED OF THE POSSIBILITY OF
SUCH LOSSES, COSTS OR DAMAGES,
OR IF SUCH LOSSES, COSTS, OR
DAMAGES ARE FORESEEABLE. IN
NO EVENT WILL DIMPLEX, OR ITS
OFFICERS, DIRECTORS, OR AGENTS
BE LIABLE FOR ANY DIRECT LOSSES,
COSTS, OR DAMAGES THAT EXCEED
THE PURCHASE PRICE OF THE
PRODUCT.

SOME JURISDICTIONS DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO
THE PURCHASER.

How State and Provincial law apply

This limited warranty gives you specic

legal rights, and you may also have other
rights which vary from jurisdiction to
jurisdiction. The provisions of the United
Nations Convention on Contracts for
the Sale of Goods shall not apply to this
limited warranty or the sale of products
covered by this limited warranty.

Warranty

© 2010 Dimplex North America Limited

Dimplex North America Limited

1367 Industrial Road
Cambridge ON
Canada N1R 7G8