Dimplex MCFSTV12-AU User Manual

MICRO STOVE AU MCFSTV12AU

EN

08/54048/0 Issue 3

OCN: 11014

The product complies with the European Safety Standards and the European Standard Electromagnetic Compatibility (EMC). These cover the
essential requirements of EEC Directives.

1

max

min

T

1

2

3

II

2

I

- MicroStove AU, MCFSTV12AU

IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Important Safety Advice

When using electrical appliances, basic
precautions should be followed to reduce

the risk of re, electric shock, and injury to

persons, including the following:
If the appliance is damaged, check imme-

diately with the supplier before installation
and operation.

Do not use this appliance in the immediate
surroundings of a bath, shower or swimming
pool.

Do not use outdoors.
This appliance must not be located imme-

diately above or below a xed socket outlet

or connection box.

WARNING : The appliance carries the
Warning Symbol indicating that it must

not be covered or has a Do not cover
label. Do not cover or obstruct in any way
the heat outlet grille located underneath the
appliance Overheating will result if the appli­ance is accidentally covered. Do not place
material or garments on the appliance, or
obstruct the air circulation around the appli­ance, for instance by curtains or furniture, as

this could cause overheating and a re risk.

In the event of a fault unplug the heater.Un­plug the appliance when not required for long
periods.The supply cord must be placed on
the right hand side of the heater away from
the heat outlet underneath the appliance.

Although this appliance complies with safety
standards, we do not recommend its use on
deep pile carpets or on long hair type of rugs.

This heater is not equipped with a device to
control the room temperature. Do not use
this heater in small rooms when they are
occupied by persons not capable of leaving
the room on their own, unless constant su­pervision is provided.

Children shall not play with the appliance.
Cleaning and user maintence shall not be
made by Children.

Children should be kept away unless con­tinuously supervised.

Children shall not turn on/off the appliance.
Children shall not plug in, regulate and clean

the appliance or perform user maintence.
The appliance must be positioned so that

the plug is accessible.
If the supply cord is damaged it must be

replaced by the manufacturer or service

agent or similarly qualied person in order

to avoid a hazard.

CAUTION: In order to avoid a hazard due
to inadvertent resetting of the thermal cut­out, this appliance must not be supplied

through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.

CAUTION - Some parts of this product can
become very hot and cause burns. Particular
attention has to be given where children and
vulnerable people are present.

This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by person responsible for their safety.

CAUTION

- Do not use this heater in the immediate
surroundings of a bath, a shower or a swimming
pool;

- Do not use this heater if it has been dripped;

- Do not use if there are visible signs of damage to
the heater;

- Use this heater on a horizontal and stable surface,
or fix it to the wall, as applicable.

WARNING: Do not use this heater in small rooms when they

are occupied by persons not capable of leaving the room on
their own, unless constant supervision is provided.

WARNING: To reduce the risk of re, keep textiles, curtains,

or any other ammable material a minimum distance of 1 m

from the air outlet.

General

Unpack the heater carefully and retain the packaging for possible

future use, in the event of moving or returning the re to your supplier.

These models are designed to be free standing and are normally
positioned against a wall.

The re incorporates a ame effect, which can be used with or without

heating, so that the comforting effect may be enjoyed at any time of

the year. Using the ame effect on its own only requires little electricity.

A choice of 600W or 1200W heat output is provided by the fan heater,
which is located at the bottom of the unit.

Before connecting the heater check that the supply voltage is the
same as that stated on the heater.

Please note: Used in an environment where background noise is

very low, it may be possible to hear a sound which is related to the

operation of the ame effect. This is normal and should not be a

cause for concern.

Electrical connection

WARNING – THIS APPLIANCE MUST BE EARTHED.

This heater must be used on an AC ~ supply only and the voltage
marked on the heater must correspond to the supply voltage.
Before switching on, please read the safety warnings and operating
instructions.

- MicroStove AU, MCFSTV12AU

IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Controls - see Fig. 2

These switches provide a choice of heat settings, The appliance is in
standby mode when the mains lead is plugged in. This is indicated by

the red neon behind the ame effect screen.

The two selector switches are in the ON position when the side with
the markings on (i.e. I, or II) is pushed in.

Selector switch 1 (0) Press for ‘ON’. If both selector switches 2 and

3 are in the OFF position, the product works on

ame effect only.

Selector Switch 2 (I) Provides 600W heat output
Selector Switch 3 (II) Provides 1200W heat output.

Light Emitting Diode

This re is tted with LED (Light Emitting Diode) bulbs in place of

traditional incandescent bulbs. These generate the same light levels
as traditional bulbs, but use a fraction of the energy consumed.These
bulbs cannot be replaced.

Thermal Safety Cut-out

The built-in overheat cut-out switches off the appliance automatically in
the event of a fault. If this occurs switch off the appliance or disconnect
the mains plug from the socket. After a short cooling down phase, the
appliance is ready for use again. If the fault should occur again, see
your local dealer.

Maintenance

WARNING: ALWAYS DISCONNECT FROM THE POWER SUPPLY
BEFORE ATTEMPTING ANY MAINTENANCE.

Cleaning

For general cleaning use a soft clean duster – never use abrasive
cleaners. The glass viewing screen should be cleaned carefully with a
soft cloth. DO NOT use proprietary glass cleaners.

To remove any accumulation of dust or uff the soft brush attachment

of a vacuum cleaner should occasionally be used to clean the outlet
grille of the fan heater.

Recycling

Please recycle where facilities exist. Check with your Local

Authority or retailer for recycling advice in your country.

After Sales Service

Should you require after sales information or assistance with this
product, please contact Glen Dimplex Australia on 1300 556 816 (AUS)
/ 09 274 8265 (NZ) or visit our website at www.dimplex.com.au (AUS)
/ www.dimplex.co.nz (NZ).

Glen Dimplex Australia Pty Ltd.
1340 Ferntree Gully Road,
Scoresby,
VIC 3179,
Australia

www.dimplex.com.au
[e-mail]

Ph: 1300 556 816
Fax: [phone]

Glen Dimplex Australasia Ltd.
35 Harris Road,
East Tamaki,
Auckland
New Zealand

www.dimplex.co.nz
[e-mail]

Ph: 09 274 8265
Fax: [phone]