Dimplex LYDON User Manual

www.comfortvdome.ru

LYDON

UK RU

08/51199/0 Issue 0

The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3 These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC.

1

185615

536

671

424

A

B

2

1

2

M

A

X

IN

M

3

T

3

4

5

IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Important Safety Advic
When using ele

followed to reduce the risk of fire, ele
including the fol

If the appliance is damaged, check with the suppl

n.

operatio
Do not use o
Do not us

pool.
Do not locate the heater immediately below a fixed socket outlet or

connection box.
This appl

sistance or supervision if their physical, sensory or mental capabilities

as
pre

vent them from using it safely. Children should be supervised to ensure

that they do not play
Do not use this heater in serie

a timer or any other de
fire risk exists when the heater

Ensure that furniture, curtains or other comb
no closer than 1 metre from the he

In the event of a fault unplug the heater.
Un

plug the heater when not required for long periods.

Although this heater compl
its use o

The ap
If the supply cord is damaged it must be replaced by the manufacturer or

service agent or a similarly qual
Keep the sup

utdoors.

e in the immediate surroundings of a bath, shower or swimming

iance is not intended for use by children or other persons without

n deep pile carpets or on long hair type of rugs.

pliance must be positioned so that the plug is accessible.

ply cord away from the front of the heater.

WA

RNING: In order to avoid overheating, do not cover the heater. Do
not plac
circulation around the he
in

dicating that it must not be covered.

e:

ctrical appliances, basic precautions should always be

lowing:

with the appliance.

e material or garments on the heater, or obstruct the air

s with a thermal control, a program controller,

vice that switches on the heat automatically, since a

ies with safety standards, we do not recommend

ctrical shock and injury to persons,

ier before installation and

is accidentally covered or displaced.

ater.

ified person in order to avoid a hazard.

ater. The heater carries the Warning symbol

ustible material are positioned

Cleaning

WARNING – ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE
CLEA

NING THE HEATER.

For gen

eral cleaning use a soft clean duster – never use abrasive cleaners. The glass

g screen should be cleaned carefully with a soft cloth. DO NOT use proprietary

viewin
glass cleaners.
To remove a
clea

ny accumulation of dust or fluff the soft brush attachment of a vacuum

ner should occasionally be used to clean the outlet grille of the fan heater.

Recycling

For electrical products sold within the European Community.

At the e

nd of the electrical products useful life it should not be disposed of with
household waste. Please recycle where facilities exist. Check with your Local
Authority or retai

ler for recycling advice in your country.

After Sales Service

Should you require after sales service or should you need to purchase any spares,

ase contact the retailer from whom the appliance was purchased or contact the

ple
service n

umber relevant to your country on the warranty card. Please do not return a
faulty product to us in th
in providing you with a satisfactory service. Please retain your receipt as proof of
purchase.

e first instance as this may result in loss or damage and delay

General

Unpack the heater carefully and retain the packaging for possible future use, in the
event of

moving or returning the fire to your supplier.

Th

e fire incorporates a flame effect, which can be used with or without heating, so that
the comforting ef
its own only requires l

Th

ese models are designed to be free standing and are normally positioned against a

l.

wal
Before con

the heater.

on

Please note: Used in an enviro
be p

ossible to hear a sound which is related to the operation of the flame effect.

is normal and should not be a cause for concern.

This

fect may be enjoyed at any time of the year. Using the flame effect on

ittle electricity.

necting the heater check that the supply voltage is the same as that stated

nment where background noise is very low, it may

Electrical connection

WARNING – THIS APPLIANCE MUST BE EARTHED

This heater must be used on an AC ~ supply only and the voltage marked on the
heater must correspond
Before switching on, please re

Wall fixing

Dri

ll holes using a 6mm drill as illustrated. Insert plugs and screws. The raw plug

ied is suitable for use in block walls (special fasteners required on stud walls). Do

suppl
not ful

ly tighten screws, leave the head of the screw at least 10mm away from the wall.

the keyhole slots on the fire over the screws and lower into position.

Place

Controls

Three switches provide a choice of heat
the side with

Switch 1 (I) Controls the ele

Switch 2 (I) Provides 1kW he
Switch 3 (I

- see Fig. 2

the markings on (i.e. I, I, or II) is pushed in.

I) Provides 2kW output with switch 2

to the supply voltage.

ad the safety warnings and operating instructions.

- see Fig. 1

Note: This sw
operate with or with

itch must be in the ON (I) position for heater to

settings. A switch is in the ON position when

ctricity supply to the heater and flame effect.

out heat.

at output

UK

Thermostat (T)

In ord

er to maintain a certain room temperature, set the controller to ‘max.’. Operate

the appl

iance at full power until the required room temperature is reached. Set back

the

thermostatic controller until the appliance switches off with an audible “click”. This
temperature wi
off automatical
thermostat

setting is higher than the room temperature.

- see Fig. 2

ll be kept almost constant by the thermostatic control switching on and
ly. Please note that the appliance can only be switched on when the

Thermal Safety Cut-out

A thermal safety cut-out is incorporated in the heater to prevent damage due to
overhe

ating. This can happen if the heat outlet was restricted in any way. The heater

wi

ll switch on once the obstruction has been removed and the heater has cooled. If the
cut-out continues to operate intermittently, the heater should be switche
service a

gent contacted.

Lamp Replacement

To g

ain access to the lamps remove the fuel effect from the fire by removing the fixing

screws from
Remove the rotisserie by careful
(Fig. 4).
Remove
Replace with a 60W E14 S
lamp.
Refit

the fuel bed and sliding out the fuel effect (Fig. 3).

the defective lamp by unscrewing it as shown in Fig. 5.

fuel effect and secure it with the screws.

- see Fig. 3, Fig. 4 and Fig. 5

ly sliding the rubber connecter off the motor shaft

ES Clear Candle lamp. Take care not to over-tighten the

d off and a

Официальный дилер Dimplex: ИП Баранов В.А.

тел [phone]

сайт: www.comfortvdome.ru

e-mail: [e-mail]