Dimplex GDC9RWA, GDC12RBA, GDC12RCWA, GDC12RWA, GDC12RCBA Instructions For Use Manual

...
MODEL: GDC9RWA / GDC12RBA / GDC12RWA
GDC12RCWA / GDC12RCBA / GDC14RBA
GDC14RWA / GDC14RCWA / GDC14RCBA
INSTRUCTIONS FOR USE
PORTABLE AIR CONDITIONER
VERY IMPORTANT
Do not install or use your portable air conditioner unit before carefully reading this instruction manual. Please retain this manual for product warranty and future reference
CAUTION
1." DO NOT BLOCK VENTILATION "! Please make sure the inlet and outlet ventilation is not blocked at all times.
2. Operate this unit on a horizontal surface to avoid water leakage.
3. Do not operate this unit in an explosive or corrosive atmosphere.
4. Operate this unit in an ambient temperature of 17~43 degrees Celsius when
switched to cooling and when switched to heating, the ambient operating temperature should be 5~23 degrees Celsius.
5. Clean the air filter periodically to enjoy the most efficient cooling.
6. When the unit is turned off, please wait at least 3 minutes before restarting it.
This is to prevent the compressor from being damaged.
7. This unit needs to be plugged into a 10 Amp power point.
Please do not use any extension cords with this unit.
8. This unit is for indoor operation only.
9. Make sure the adjustable air vent is open, and also the exhaust pipe and drain pipe if
fitted are extended to the closest window before using.
10. When the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid hazard.
11. The batteries, from the remote control, must be removed from the appliance
before it is scrapped and must be disposed of safely.
12. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
13. Children should be supervised to ensure that they do not play with the appliance.
CONGRATULATIONS ON YOUR SELECTION OF A QUALITY PORTABLE AIR CONDITIONER
PORT ABLE AIR CONDITIONER
Y our Air Conditioner has been designed and manufactured to the highest standards of modern engineering. One of its many features is a remote control device which allows you to control all functions conveniently.
- Moves easily from room to room on easy glide castors
- No installation required-just plug into any household 10 Amp power outlet
- Refrigerated air system designed to cool instantly whenever you want it
- Heated air system design heats instantly whenever you want it
- Powerful dehumidification process and filtered air cycle for improved breathing conditions
- If the remote control function is not required, your one touch electronic pad provides easy to identify manual operation
- 24 hour programmable timer that can be used with either the air conditioning or dehumidification setting
- Unique sleep control function
- 220-240 Volt 50Hz op eration
- 1.6 meter cord with plug
Important.
The air conditioning unit must always be stored and
transported upright.
In case of doubt we suggest to wait for at least 24
hours before you start the air-conditioning unit.
CONTENTS
1 / Air control unit 2 / 1-remote control unit 3/ Window kit
NAMES OF THE PARTS
1. Push button switch
2. Display screen
3. Adjustable air vent
4. Window kit adaptor
5. Exhaust tube
6. Drain hose ( cooling &heating model only)
7. Cool inlet
8. Cool air filter
9.
Hot inlet
10. Drain plug
11. Hot air filter
Note: make sure drain plug is fitted before use. ( 10 )
PUSH BUTTON SWITCHES & DESCRIPTION OF FUNCTION
1. POWER KEY Press to turn unit "ON" or "OFF".
2. FUNCTION Press this key to select refrigeration, heat or dehumidification.
(Heating function is only available in the following models:
GDC12RCWA / GDC12RCBA /
GDC14RCWA / GDC14RCBA)
3. TEMPERATURE REGULATION KEY (UP)
This key raises the preset temperature by 1 each time it is pressed to a maximum of 30
4. TEMPERATURE REGULATION KEY (DOWN)
This key lowers the preset temperature by 1℃ each time it is pressed to a minimum of 17℃.
In normal conditions, the temperature data which appears on the panel is the ambient
temperature, not the temperature which is set by the user. When the user has adjusted and set the temperature to desired level, the data on the panel will return to the ambient temperature 5 seconds later. The ambient temperature will descend or change according to the temperature which is set by the user, but the temperature descendant time and speed will depend on the environment and space where it operates. For example, if the ambient temperature is too hot or the room is too large, the rate at which the temperature descends will be slow, and the cooling efficiency will be poor as well.
Loading...
+ 6 hidden pages