This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
–
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
Never clean Wine Cooler parts with flammable fluids. The fumes can create a fire hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or explosion.
WARNING
--- Use two or more people to move refrigerator.
--- The appliance is not intended for use by young children or infirm persons without supervision.
--- If the supply cord or other components damaged, it must be replaced by the manufacturer, or a
qualified technician in order to avoid a hazard.
CAUTION: Do not use extension cord.
DANGER:
Risk of child entrapment. Before you throw away your old refrigerator or freezer:
Take off the door
Leave the shelves in place so that children may not easily climb inside.
To reduce the risk of fire, electrical shock, or injury when using
your Wine Cooler, follow these basic precautions:
-Save these instructions-
-3-
Disposal
Disposal of Waste Package
The package is used to protect the wine cooler during transportation.
Warning
For the discarded wine cooler:
1.
Please remove plug from power source.
2.
Please remove plug and cord.
The wine cooler contains cooling agent and the insulation layer contains gas.
The cooling agent and the insulated gas must be disposed by professional
personnel. Please do not damage the loop pipeline of the cooling agent before
it’s disposed by professional personnel.
DANGER or WARNING: Risk of child entrapment.
1. Before you throw away your old Wine Cooler: take off the doors. Leave
the shelves in place so that children may not easily climb inside.
-4-
Safety & Warning Before
Operation of Wine Cooler
Please
read the User Manual carefully!
It contains some important information on placement, use and maintenance of
the wine cooler.
Do not dispose of instruction manual.
In case of refrigerant leak
Any flame or fire source should be kept away from the wine cooler.
Please ventilate the room thoroughly for several minutes.
Pull out the power plug.
Inform after-sales service personnel.
The more cooling agent the wine cooler has, the bigger the space to place the
wine cooler should be. For every 8g cooling agent, there must be at least 1m³
of space in the room. The quantity of wine cooler is marked on the nameplate
at the back-plate of the wine cooler.
The replacement of power cord and other repair activities can only be
carried out by authorized service agents/repairers as advised by
manufacturer. Improper installation or repair may cause harm to users.
During Use
Do not use electric appliance (such as: heater, electric ice maker, etc.)
within the inside of the wine cooler.
Danger of Electric Shock!
Don’t remove frost or ice layers with sharp or keen-edged object.
Otherwise, the cooling agent pipeline may be damaged. The ejected
- 5 -
cooling agent may cause injury to eyes.
Do not store products that contains combustible gas (such as: aerosol cans)
or explosive materials in the wine cooler.
Danger of Explosion!
Do not use steam type cleaning equipment to clean the wine cooler or
defrost. Steam may enter the electric elements and cause a short circuit.
Do not use the base or the door of the wine cooler as footplate or support.
When you defrost or clean the wine cooler, please pull out the power plug.
When you pull out the power plug, please hold the plug rather than pull
the power cord.
Wine with high alcohol content must be sealed and stored vertically.
Avoid contamination of grease to the plastic components and the door
sealing components of the wine cooler, or the plastic components and the
door sealing components of the wine cooler will disintegrate.
Do not envelop or close the ventilation or exhaust holes.
Do not store or use gasoline or any other flammable vapors and liquids in
the vicinity of this or any other appliance. The fumes can create a fire
hazard or explosion.
Do not use extension cords.
Children
Do not give packaging or other components to children for play. The folded
paperboard and the plastic film may cause danger of suffocation.
Never allow children to operate, play with, or crawl inside the Wine Cooler.
The appliance is not intended for use by young children or infirm persons
without supervision; young children should be supervised to ensure that
they do not play with the appliance
-6-
Before Using Your Wine Cooler
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
5 Shelves
1 Bottle/Can Basket
1 Instruction Manual
Before connecting the Wine Cooler to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Wine Cooler
Place your Wine Cooler on a floor that is strong enough to support it when it is
fully loaded. To level your Wine Cooler, adjust the adjustable legs at the
bottom of the unit.
Allow 3cm of space between the back and sides of the unit, which allows the
proper air circulation to cool the compressor.
Locate the Wine Cooler away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat
sources may increase electrical consumption. Extreme cold ambient
temperatures may also cause the unit not to perform properly.
Avoid locating the unit in moist areas.
Plug the Wine Cooler into an exclusive, properly installed-earthed wall outlet.
Do not under any circumstances cut or remove the third (earth) prong from the
power cord. Any questions concerning power and/or earthing should be
directed toward a certified electrician.
After plugging the appliance into a wall outlet, allow the unit to cool down for
2-3 hours before placing items in the compartment.
-7-
The wine cooler should be placed in dry and ventilated room. The location of
the wine cooler should not be placed in direct sunshine. The wine cooler
should be far away from heating sources, such as: cooking stove or heating
radiator. If the wine cooler has to be placed near heating source, please adopt
proper heating insulation board for insulation or keep the wine cooler at least
the following minimum distances away from the heating sources:
For electric stove: 3 cm. For
To ensure proper ventilation for your wine cooler, allow for 3cm space on each
side between walls, 3cm space between back of your wine cooler and the wall,
and 3cm space between counter top and the roof or ceiling.
oil or coal stove: 30 cm.
Notice
If the room temperature is lower than +16°C, the wine cooler may not be able
to work normally, because if the room temperature is too low, the temperature
sensitive goods might be damaged.
If the room temperature and humidity is too high, the glass door of the wine
cooler may have condensation.
Connect Wine Cooler with Power Source
Warning
Improper use of the earthed plug can result in the risk of electrical shock. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
After placing the wine cooler, please wait for at least two hours before the
wine cooler can be operated. This is because the engine oil in the compressor
may flow into the cooling system during the transportation process.
Before the first running, please clean the inside chambers of the wine cooler
(Please see the section on cleaning).
The power socket should be reachable. The wine cooler should be connected
with 220-240V/50Hz AC power.
- 8 -
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.