How it Works
Dimension One Spas
Loading...
Sonic Immersion System

Dimension One Spas 01510-1030E Rev A, Sonic Immersion System Owner's Installation Manual

Export Sonic Immersion System
Table of Contents
OWNER’S MANUAL ......................................................................... 1
DEALER INSTALLATION .............................................................. 2
Overview of the Installation........................................................... 3
Required Tools...............................................................................3
Parts List........................................................................................ 5
Remove Equipment Compartment Panel ....................................... 8
Remove the Sub Woofer Compartment Panel.............................. 10
PRE WIRING FROM EQUIPMENT COMPARTMENT TO SUB WOOFER
Pre-Wire Power Supply ............................................................... 25
Installing Power Supply in Equipment Compartment.................. 28
Wiring the Power Supply ............................................................. 30
Determining Location of CD Weather Cover .............................. 32
Cutting Panel Hole for CD Player Door Assembly ..................... 33
Installation of CD Player Door and Bezel...................................37
Installation of Panel and CD Player............................................38
Installing the Satellite Speaker Wires.......................................... 42
iii
Export Sonic Immersion System
iv
Export Sonic Immersion System Dealer Owners Manual
Owner’s Manual
Features of the Sonic Immersion
• Dealer installation allows you to add to any Sonic Immersion System ready Dimension One Spa in stock
• Patented planar magnetic speaker technology (1/4” [6.35 mm] thick) that generates unparalleled sound quality even in the harshest environmental conditions
• Superior fidelity and low distortion
• Articulated speaker mount that allows multidirectional
capability and if the speakers are struck by an object, speakers deflect without being damaged
• Remote operation
Using the CD Player
The manufacturer of the Sonic Immersion System CD Player has supplied a User Guide for the CD player. Please refer to this guide for instructions on how on use of the CD player.
1
Export Sonic Immersion System Dealer Installation Guide
Dealer
Installation
This section intended for use by authorized dealer personnel only
2
Export Sonic Immersion System Dealer Installation Guide
Getting Ready To Start
The Sonic Immersion System can only be installed on spas with the following serial numbers.
Table 1 Sonic Immersion System Ready Spas
Model Serial Number
Aurora HP 91275 or higher Aurora II 91210 and higher (Also 91184) Aurora XLT 91295 and higher Caliente HP 91301 and higher (Also 91290 and
91299)
Californian 91198 and higher Chairman 91245 and higher Chairman II 91234 and higher Diplomat 91197 and higher Nautilus 91458 and higher (Also 91455) Triad 91372 Triad II 91625 an higher (Also 91567)
Overview of the Installation
The installation of the Sonic Immersion System is a simple process that includes removing the spa skirt, drilling a few holes using the templates provided to guide you, and then connecting one or more power cables. This guide is provided to help complete this task in a quick and efficient manner.
Required Tools
You will need the following tools to complete the installation:
3
Export Sonic Immersion System Dealer Installation Guide
Table 2 Required Tools
Electric drill
1 ½ inch (3.8 mm) hole saw
¼ inch (6.35 mm) drill bit
3/8 inch (9.5 mm) drill bit
Saber Saw
Phillips screwdriver
Tape (masking, electrical, duct, or
packaging) ½ in (12.7 mm) width
Spring-loaded punch
(or other tool(s) that can be used to mark drilling locations, such as a hammer & nail)
Fine Point Marker
Measuring Tape
Fish Tape
Fish Tape Lubricant
Non Ratcheting PVC Pipe Cutter
4
Export Sonic Immersion System Dealer Installation Guide
Medium Size Needle Nose Pliers
Wire Stripper
Utility Knife
5/16” (7.94 mm) Nut Driver or wrench
Six inch (15.24 cm) square
Stapler and Staples
Straight Edge
Safety Glasses
Silicone caulking (clear)
Small Saw
Parts List
You should have received the following parts in the Sonic Immersion System installation kit:
5
Export Sonic Immersion System Dealer Installation Guide
Table 3 Parts List
Description Qty Item
Number
This document 1 01510-
1030
Amplifier 1 01564-08
Coarse-
5 01051-06 Threaded Drywall Screws
Template 1 Doc 74-
Rev A
Power Supply
1 01564-19 Harness
Power, supply,
1 01564-01 stereo
Main Harness 1 01564-20
Speaker, lead 2 01564-21
Speakers,
2 01564-14 Satellite
6
Export Sonic Immersion System Dealer Installation Guide
Stereo 1 01564-03
Sub-woofer sub
1 01564-09 assembly
Stereo cover,
1 01564-04 marine
Dual pole
1 01564-05 antenna
Preamp stereo,
cable
Power supply
screw, sheet metal, SS, PH
Marine cover
screws, #8 x ½” (1.3 cm) SS Truss Head
Cable Ty, 4”
(10.2 cm) black
2 01570-24
2 01011-38
4 01011-40
10 01200-006
7
Export Sonic Immersion System Dealer Installation Guide
Cable Ty Mount 10 01200-005
Removing Panels
In order to install the system up to three panels must be removed from the spa: the equipment compartment panel, the panel where the sub woofer is installed, and the panel where the Satellite Speakers are to be installed.
Remove Equipment Compartment Panel
Possible Electrical Shock Hazard
Warning
1. Turn off the main spa circuit breaker located in the disconnect box or house panel.
2. Verify that all power has been turned off before continuing installation.
Refer to the Spa Service Manual to determine how to confirm that all power to the spa has been turned off.
Note
3. Locate the spa’s Main Top Side Control, Figure 1.
8
Export Sonic Immersion System Dealer Installation Guide
Figure 1. Top Side Control
4. The Lower Control is located in the equipment compartment behind the spa panel below the Main Top Side Control.
5. Use the screwdriver to remove the equipment compartment panel screws, Figure 2.
Figure 2. Equipment Compartment Panel Screws
9
Export Sonic Immersion System Dealer Installation Guide
The number of screws to be removed will depend on the model of spa.
Note
Remove the Sub Woofer Compartment Panel
The installation location of the sub woofer compartment will vary from one spa model to another. Use Table 4 to locate the compartment on your spa. First, stand in front of the spa facing
the Top Side Control (at the 6 o’clock position, see below) and then refer to Table 4 below.
10
Export Sonic Immersion System Dealer Installation Guide
Sub-Woofer Installation Locator
Top Side Control
Table 4 Model List
Model and Number Location of Installation
Aurora II and Chairman
Chairman II and Aurora XLT
Diplomat, Californian
Nautilus
Top Side Control
Top Side Control
Top Side Control
Top Side Control
11
Export Sonic Immersion System Dealer Installation Guide
Caliente HP, Triad II, Aurora HP, and Triad
Top Side Control
1. Use the screwdriver to remove the spa panel screws, Figure 3.
Figure 3. Equipment Compartment Panel Screws
The number of screws to be removed will depend on the model of spa.
Note
12
Export Sonic Immersion System Dealer Installation Guide
Installing the Sub Woofer Compartment
The installation of the sub woofer compartment consists of removing the panel, removing the paper cover, exposing the plug, removing the plug, and installing the sub woofer compartment.
1. If you have a spa with wood siding you may skip to Step 2. If your spa has EnviroTect siding you will need to remove the
white foam sheeting, Figure 4.
Figure 4. Removing EnviroTect Sheeting
2. Using a locking utility knife set for a depth of about ½ inch, cut a 13” X 18.5” (33 cm X 47 cm) rectangle as shown in Figure 5. Remove the paper and foam until you expose the sub woofer plug. You may need to use a screwdriver or other tool to remove the paper and foam.
Figure 5. Cutting Rectangle
13
Loading...
+ 37 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use