Digoo DG-TH1180 Operating Instructions Manual

* To turn off the alarm, press button until the alarm symbol disappears on the screen.

Open the battery compartment cover. Insert batteries according to the correct polarity showed in the
compartment. The main unit needs 2 x AAA batteries, and the sensor needs 2 x AAA batteries.
After powering on, the clock will take about 3 minutes to connect with the outdoor transmitter. When
connecting, the signal symbol would be flashing on the screen.

OPERATING INSTRUCTIONS

Large Screen Thermometer Hygrometer

Model: DG-TH1180

POWERING ON

TIME SETTING

ALARM SETTING AND SNOOZE FUNCTION

At normal time displaying mode, press button once to check the setting alarm time. Press
button once more to turn on the alarm function. There is an alarm symbol on the screen.

At the alarm setting mode, hold pressing button to set the alarm time. Press or
button to adjust. Hold pressing or button, the digit will move faster. The setting order is hour
minute exit. If there is no more operation for 30 seconds, it will save the existing setting
and turn to normal display or press button again to confirm the setting.
The alarm sound will last for 2 minutes and it will change as below:
0-8 seconds： BI per second
9-19 seconds： BI BI per second
20-59 seconds： BI BI BI per second
>60 seconds： Keep BI
* When the alarm ring is on, press any other button to cancel the alarm sound. The alarm will be on
again after 24 hours.

At normal time displaying mode, hold pressing SET button till entering the time setting mode. The
figure will be flashing. Press or button to adjust the values. Hold pressing or button,
the digit will move faster. The setting order is 12/24 Hr hour minute year month date exit.
If there is no more operation for 30 seconds, it will save the existing setting and turn to normal
display or press SET button again to confirm the setting.
At normal time displaying mode, press SET button once to check the calendar.

Snooze

SET MEM

Press or button to switch °C/°F display
Indoor temperature range: 0°C~ +50°C
Indoor humidity range: 20%-95%
Outdoor temperature range：-20°C~ +60°C

TEMPERATURE

TEMPERATURE RECORD

Tips:

Press MEM button to switch between the maximum and minimum record of in/out temperature and
indoor humidity.
Hold pressing MEM to clear the maximum and minimum record and recalculate.
Clock will clear the maximum and minimum record automatically at 0:00 and restart recording.

1. Please remove the membrane on the screen before you use this product.

2. Please note that, if the screen is becoming too fuzzy to recognize the digit, that means
you need to change the battery for DG-TH1180, and please kindly set the time again
after battery changed.

3. Do not clean any part of the product with benzene, thinner or other solvent chemicals. When nec­ essary, clean it with a soft cloth.

4. Never immerse the product in water. This can cause electrical shock and damage the product.

5. Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.

6. Do not tamper with the internal components.

7. Do not mix new and old batteries or batteries of different types.

8. Do not mix alkaline, standard or rechargeable batteries with this product.

9. Remove the batteries if storing this product for a long period of time.

10. Do not dispose of this product as unsorted municipal waste. Collection of such waste separately
for special treatment is necessary.