Page 1
Technical information
gb
Appendix
Optical detection Activated when the display lights up
Light sensitivity Visible light >3 lux, for longer than 2 seconds
Placement Horizontally on the display
Ergonomic design Ideal for people with impaired vision/dexterity
Mobile phone sensor
Battery 1 x AAA 1.5 V alkaline
Operating time > 1 years under normal use
Connectors Sensor: 2.5 mm teleplug, adapter: 3.5mm tele teleplug
Visit compatible Integrates mobile devices with the Visit system
Operation, storage and
transport conditions
Operating temperature: 0°–35° C, 32°–95° F.
Transport and storage temperature: -10°–50° C.
Relative humidity: 15% - 90% (non condensing).
34 mm
24 mm 24 mm
BE9250
bellman.com
BE9250_017MAN009
E-mail info.cn@bellman.com
Fax +86 20 8333 5528
Phone +86 20 8318 2950
Guangzhou, China, 510095
339 Huanshi Dong Rd
1401-06 , Main Tower, GD Int’l Bldg
Bellman & Symfon Asia Ltd.
Asia Pacic oce
E-mail: support.bsn@bellman.com
Toll-free: + (833) 235 5626
Phone: +1 (910) 239 5796
Unites States
Wilmington, NC 28405
5509 Business Dr, Unit B
Bellman & Symfon North America Inc.
North America oce
the Bellman & Symfon logo are registered trademarks of Bellman & Symfon AB.
© 2021, Bellman & Symfon AB, all rights reserved. Bellman, Bellman & Symfon and
E-mail info@bellman.com
Fax +46 31 68 28 90
Phone +46 31 68 28 20
Sweden
436 32 Askim
Södra Långebergsgatan 30
Bellman & Symfon Group AB
European oce
Page 2
2 s
1
gb
Connect
de
Anschliessen
fr
Connectez
nl
Aansluiten
se
Anslut
no
Tilkobling
dk
Tilslutning
fi
Liitä
es
Conectar
it
Collegare
pt
Ligar
gr
Συνδεω
pl
Podłączać
cz
Připojit
hu
Telepítés
Povezati
AA
2
gb
Test
de
Testen
fr
Tester
nl
Test
*
BB
CC
se
Testa
no
Testing
dk
Test
fi
Testaus
es
Probar
it
Provar
pt
Testar
gr
Έλεγχος
pl
Testowanie
cz
Test
hu
Tesztelés
Provera
Troubleshooting
If Try this
The receiver is not
activated when there
is an incoming call or
message
Note! Light lasting less
than 2 seconds will not
activate the system.
The receiver is activated
randomly
• Make sure that the sensor is placed on the screen
• Check the battery in the battery pack. Change it
• Ensure that all cables are properly connected.
• Check the radio link by pressing the Test-button
• Make sure that the sensor is standing upright
gb
Appendix
of your device and that the screen lights up.
if needed. You can test the batteries by tilting the
Mobile phone sensor. If the battery is charged, the
LED on the transmitter lights up.
on the transmitter.
on a at and non-transparent surface.
* Visit transmitter sold separately.
Loading...