Digitus Professional DN-95345 Service Manual

Outdoor 4-Port Fast Ethernet

PoE Switch + 1 Uplink Port

Quick Installation Guide

DN-95345

Introduction

The DIGITUS® outdoor PoE switch is a high quality PoE switch in a
weatherproof housing with the IP67 protection class.The housing is very
sturdy and conforms to the IK10 vandalism protection class. The PoE switch
offers a maximum range of up to 250 meters for PoE 802.3af devices and up
to 200 meters for PoE 802.3at devices with a transmission rate of 10Mbps.
When using the standard 100m range, the transmission rate is 100Mbps.
This outdoor switch serves as an all-in-one device that is ready for use
immediately after connecting it to the mains voltage. The device requires no
settings to be made thanks to plug and play. If you you’re your PoE devices
into a free PoE port, the switch will automatically detect power supply and
PoE mode. The all-in-one solution for outdoor PoE applications requires no
separate power supply and no external overvoltage protection.

Package Contents

+

* 1x PoE switch * 1x Quick Installation Guide

* 1x T25 L-wrench

Important

1. Install the PoE switch in a ventilated and dry place that is free of
electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 5e UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 75W.

Connection

Industrial 4xFE PoE + 1xFE EXPoE Switch

-

LINK/ACT PoE

-

2 3 4 5

VAC 100~240 power input

EX Mode

PWR

OFF
ON

Port LED1 Port LED2

Ex Mode Dip Switch

EX ON Ports 1 & 2 up to 250m PoE distance. When enabled, each port is

isolated, but is linked to the uplink ports.

EX OFF Normal communication for ports 1 ~ 5

EX mode in 802.3af (15.4W):

Camera connection up to 250m@10Mbps via EXPoE ports.

EX mode in 802.3at (30W):
Camera connection up to 200m@10Mbps via EXPoE ports.

Led Definitions

Power Orange ON Power is on and normal.

Orange Off Power is off.

Link/Act Green ON Ethernet port is connected.

Green Off No connection.

Green blinking Data is being transmitted or received.

PoE Orange ON Port is linked to a powered device.

Orange Off No device is connected.

Orange blinking Abnormal power supply is detected.