Digitus Professional DN-95343 Service Manual
16/24FE (PoE) + 2G Combo
PoE Switch
User Manual
DN-95342 DN-95343
Introduction
The DIGITUS® Combo PoE Switch are Gigabit Uplink Unmanaged Switch which
provides you with a high-performance, low-cost, easy-to-use, seamless and standard
upgrade to boost your old network to 1000Mbps. Increase the speed of your
network server and backbone connections, making Gigabit connection to a server or
uplinking a network necessarily.
Its PoE ports can automatically detect and supply power with those IEEE 802.3af/at
compliant Powered Devices (PD). The electrical power is transmitted along with data
in one single cable allowing you to expand your network where there are no power
lines or outlets, where you wish to fix devices such as AP, IP Cameras or IP Phones,
etc.
Features
16 or 24 port 10/100Mbps PoE RJ45 Ports
2 x 10/100/1000Mbps Combo Ports
Complies with IEEE802.3af/at Power over Ethernet
Supports PoE Power up to 32W for each PoE port
Auto detect power device
Remote power and Data feeding up to 100m
Flow Control for Full Duplex operation and back pressure for Half Duplex
Operation
Support VLAN and CCTV function
16K MAC address, automatic address learning and address aging
Support Energy-Efficient Ethernet (EEE) function EEE802.3az
Support PD Alive function (the switch port is disconnected will
automatically connected)
Package Contents
Check the following contents of your package:
PoE Switch x 1
Manual x 1
Power Cord x 1
Accessories (Mounting Ears x2, Rubber Feet x4, screw x8)
If any part is lost and damaged, please contact your local agent immediately.
Hardware Description
Front Panel
The Front Panel Consists of DIGITUS 10/100M Auto-Negotiation Ethernet RJ45 Ports,
2-Port Gigabit Combo Port. The LED indicators are also shown on the panel.
DN-95343
2*1000Mbps
share SFP
slot
DN-95342
Port Status indicator
24*10/100
Mbps PoE
Port
2*10/100/100
0Mbps Port
Port Status indicator
Port Status indicator
16*10/100
Mbps PoE
Port
2*10/100/100
0 Mbps Port
2*1000 Mbps
share SFP slot
Loading...