Page 1
Gigabit PoE++ Splitter, 802.3bt
Manual
DN-95206
Introduction
The DIGITUS Gigabit PoE Splitter delivers data and power via a single
network cable to devices that do support Power over Ethernet. To
deliver power and data, simply connect the input side of the splitter to a
PoE switch or a PoE injector and the output side to a non-PoE
compatible network device such as an access point, IP phone or IP
camera. The splitter is powered by PoE (Power over Ethernet), therefore,
you do not need an additional power supply unit and can use the device
even where there are no power lines or power outlets. The output
voltage is 12V and is provided via a terminal block. The splitter requires
no configuration and thus guarantees a fast and seamless integration
into your network.
Page 2
Data: DN-95206 it works well during 40VDC-57VDC together with PoE
injector. And the effective distance is 100met
1. DC power output connector
2. PoE power input indicator LED
3. Load active indicator LED
4. LAN data output RJ45 port
5. PoE input RJ45 port
6. Mounting hole
7. Mounting hole
Key Features
- Output power: 85W, for most high power load device.
- Output current: 7.0A
- Power Pins: 4/5(+), 7/8(-) & 3/6(+), 1/2(-)
- Metal shell with 4 mounting holes, easy to install
- Support IEEE802.3af/at/bt standard
Package Content
1x Gigabit PoE Splitter
1x Manual
1x Terminal Block
Page 3
Outline Drawing
Specifications
Standard
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Support IEEE802.3af/at/bt standard PoE injector
Page 4
PoE Power Output
- Port No.: 1
- Ethernet powered pins: 4/5(+), 7/8(-) & 3/6(+), 1/2(-)
- Data rate: 10/100/1000Mbps
- Input voltage: 40-57VDC (typical value: 55V)
- Output voltage: 12V
- Output current: 7.0A
Dimension & Weight
- Size: 155.4mm X 134mm X 42.2mm
- Weight: 762g
LED Instruction
- ACTIVE load active LED: Green
- POWER PoE power indicator LED: Green
Working Environment
- 10 to 55°C Operating ambient temperature: -10 to 55°C
- Operating height: -304.8m to 3048m
- Operating humidity: 5% to 90%, without Coagulation
Physical Interface
- PoE Interface: RJ45
- LAN Interface: RJ45
- DC output interface: 5.08mm 3 Pins green connector
Page 5
Working Functional Picture
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is
part of the shipping content. If the Declaration of Conformity is missing, you can
request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Data & Power
Data
5/9/12/24VDC
220VAC
Terminal device
Switch
Single Port PoE Midspan
PoE Splitter
220VAC
Loading...