Digitus Professional DN-95107 Service Manual

Gigabit PoE++ Injector, 802.3bt

Manual

DN-95107

Introduction

The Digitus PoE Injector minimizes your cabling when installing PoE
compatible devices such as IP network cameras. Only the Ethernet cable
is used for the data feed and power supply for the devices. This
eliminates the need to install a separate power line, and you can extend
your network where there are no power outlets or power lines. The
injector is fully compatible with the IEEE 802.3af/at/bt PoE standard and
delivers output power of up to 95W.

1. LAN Data Input Port

2. PoE Power Output Port

3. Power Instruction Light

4. Load Activations instruction

5. AC Power Input

6. GND

Key Features

- AT chip detection before supply power

- Output power is 95W

- Output current is 1.75A

- Power pin: 4/5(+), 7/8(-) and 3/6(+), 1/2(-)

- Compact design, high-power, lower cost

- Support IEEE802.3af/at/bt compliant terminal equipment

7.8.9.10. Install Hole

Package Content

1 x Gigabit PoE Injector

1 x Manual

1 x Power cord