Digitus Professional DN-93907-1 User Manual

DIGITUS® Junction Box CAT 7

✔ Category 7, 600 MHz

✔ LSA strips for AWG 22-26 cables

✔ fully shielded

✔ compact design

Abstract

DIGITUS® Junction Box CAT 7, 600 MHz, LSA strips for AWG 22-26, fully shielded, compact design

Features

- For connecting of two installation cables of category CAT 7, 6A, 6 or 5e

- Possibility of new switching e.g. because of mistakes in configuration

- Quick and easy mounting via LSA punch down tool

- CAT 7, up to 600 MHz

- Shielded metal housing

- with strain relief (mounting with 2 screws)

- LSA strips for AWG 22-26 wire diameter

- 45° tilt tinned LSA termination clamp for minimized cross section minimizing of the wire and

maximum contact via torsion and reset forces

- Dimensions (HxWxD): 26x35x80 mm

- Weight: ca. 40 g

- Delivery: Single packed in polybag

Product Overview

The DIGITUS® Junction Box CAT 7 serves as a tool for connecting of shielded or unshielded data cables.

Use the Junction Box for an extension of your cabling or to replace broken cables by re-connecting without

installing a whole new segment. For an easy and fast installation, the cable connector uses the established LSA

technique with 45° tilt of the contacts.

Product Images

Product Number Information

DN-93907-1 DIGITUS® Juction Box CAT 7, 600 MHz, LSA strips for AWG 22-26, fully shielded,

compact design, 26x35x80 mm

Suitable Accessories from DIGITUS®

DN-94001 DIGITUS® Universal stripping tool, for multiconductor cables, up to AWG 24

DN-94014 DIGITUS® pliers, cutting area 0.7 mm hole, for precise and easy cutting, compact design,

with ergonomic handle (yellow)

DN-94015 DIGITUS® Cutter & Stripper, 5" electrical cutter & stripper for flush cutting, size 22-26 AWG
DN-LSA-PT DIGITUS® LSA Punch Down Tool

DN-CT-10M-20 Velcro Tape, 20 mm wide, for structured cabling, 10 m roll, color black