Digitus Professional DN-651112 operation manual [de]
Industrial Gigabit PoE+
Injector 802.3 af/at
User Manual
DN-651112
Table of Contents
1. Package Content .............................................................. 3
2. Product Features .............................................................. 3
3. Product Specification ....................................................... 4
4. Hardware Description ...................................................... 6
4.1 Physical Dimension .............................................. 6
4.2 Product Outlook................................................... 6
4.3 Wiring the Power Inputs ...................................... 6
5. Mounting Installation ....................................................... 8
5.1 DIN-Rail Mounting ............................................... 8
5.2 Remove DIN-Rail Mounting ................................. 9
6. Hardware Installation .................................................... 10
1. Package Content
Upon open the box of the Industrial Power over Ethernet Injector
and carefully unpack it. The box should contain the following items:
Industrial Gigabit Power over Ethernet Injector x 1
User’s Manual x 1
If any of these are missing or damaged, please contact your dealer
immediately, if possible, retain the carton including the original
packing material, and use them against to repack the product in
case there is a need to return it to us for repair.
2. Product Features
■
Interface
2-Port RJ-45 interfaces | 1-Port PoE Out | 1-Port Data
One terminal block for power input.
■
PoE
Gigabit High Power over Ethernet End-Span PSE
IEEE 802.3at/802.3af PoE compliant
IEEE 802.3at/802.3af splitter devices compatible
Support PoE Power up to 15/30/60 Watts for PoE port
Provides DC power over RJ-45 Ethernet cable to device with
Ethernet port
Auto-detect of PoE IEEE 802.3at/802.3af equipment and
devices from being damaged by incorrect installation
Remote power feeding up to 100m
■
Hardware
IP30 Slim Type Metal Case
LED indicators for Power LED and PoE LED
■
Industrial Case/Installation
DIN Rail Design, -40 to 75 Degree C operation temperature
PoE-enabled terminal by PSE and thus consumes energy,
such as IP Phones, network cameras and Wireless access
points, etc.
Note
PSE (Power Sourcing Equipment) is a device (switch, or hub
for instance) that will provide power in a PoE setup.
Maximum allowed continuous output power per such
device in IEEE 802.3af is 15.4W, 30W in IEEE 802.3at.
3. Product Specification
Hardware Specification
"Data" Input Port 1 x RJ-45 STP
"PoE
Interface
(Data+Power)"
Output Port
Input power
terminal block
LED Indicator
Network Cable
Data Rate 10/100/1000Mbps
Dimension (W x D x H) 103 x 78 x 32 mm
Weight 295g
Unit Input Voltage 45 ~ 56V DC
1 x RJ-45 STP
1
System: Power
PoE Port: PoE In-Use x 1
10Base-T:
UTP Cat. 3, 4, 5, up to 100m
(328ft)
100Base-TX:
UTP Cat. 3, 4, 5, up to 100m
(328ft)
1000Base-T:
UTP Cat. 5, 5e, 6 up to 100m
(328ft) EIA/TIA- 568 100-ohm
STP (100m)
Loading...