Digitus Professional DN-19 SRV-36U-1 User Manual

483 mm (19“) Server Rack Unique Series

✔ 1.5 mm strong steel sheet

✔ Load capacity up to 1000 kg

✔ Standard colors grey and black

✔ Large range of equipment available

DN-19 SRV-42U-8/12

Abstract

483 mm (19“) Server Rack Unique Series, 600, 800 mm width - 1000, 1200 mm depth

Features

- Safety class IP20

- Front- and rear doors made out of 70% perforated steel

- Alternatively front door with perforated steel frame with plexi glass

- Front door is curved to the outside in perforated resp. plexi glass area

- Lock system with pivot lever on front- and rear door (incl. for profile half cylinder lock)

- 230° door opening angle on front- and rear doors

- Double wing opening rear door

- Front door with 4-point locking and rear door with 3-point locking

- Horizontally separated side panels (two per side), lockable and detachable

- incl. 4 pieces of leveling feet and 4 pieces of castor, already pre-configured under the rack
(front castor are lockable)

- 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized

- 483 mm (19“) profile rails are adjustable in depth and with height unit marking

- Load capacity of 483 mm (19“) profile rails: 1000 kg

- 3 pieces of mounted depth support bars for more stability from 26U (4 pieces from 36U)

- Sliding cable entry with rubber sealing on the top and base

- Roof and base with brushed cable entries left and right (on racks from 800 mm width)

- Special roof construction for fan unit, incl. perforated cover

- Several earthing points for rack components

- Incl. installation set (screws, cage nuts, washers)

- Rack is completely mounted

Product Overview

The Server Racks of the Unique Series were designed for the user friendly installation of active- and passive
network components accompanied by a neat cable management. Each rack consists of up to 1.5 mm strong
steel sheet material which ensures a very good stability as a robust steel construction due to special plate
curving technique. The color is created by powder coating in grey (RAL 7035) and black (RAL 9005). All doors
can be easily detached and the door stop can be changed from right to left. The roof is present with an added
perforated cover for a better air circulation Furthermore the roof is ready for the mounting of an air ventilation
unit. Each server rack contains 2 pairs (4 pieces) of 483 mm (19”) profile rails inside which are galvanized and
with height unit marking (countable from both directions). They are variable in depth and connected with
additional depth support bars to realize extensive 483 mm (19”) equipment installations. With a load capacity
of up to 1000 kg they can cope perfectly with server applications. The side panels are horizontally divided
which ensures best accessibility to the mounted equipment. An important aspect for each installation is the
cable management. The top and base of each rack is equipped with a sliding cable entry panel with rubber
sealing. For cabinets with 800 mm width, the possibilities of cable management get enhanced with additional
cable entries with brushes left and right in the top and base chassis. An extensive portfolio of accessories for
cable management, shelves, etc. will help to meet many requirements in daily use.

Conform due to standards

- ISO 9001:2008

- IEC 297-1, -2 (dimensions of mechanical structures of 483 mm (19“) series)

- EN 61587-1:2012 (mechanical carrier for electric systems)

- EN 60950-1:2006 (CE information technological systems - safety - part 1 - general requirements)

Product Images