Digitus Professional DN-19 42U-6-8-D-B User Manual

483 mm (19“) Network Rack Dynamic Basic Series

✔ 1.5 mm strong steel sheet

✔ Load capacity up to 600 kg

✔ Standard colors grey and black

✔ Large range of equipment available

DN-19 42U-8/8-D

Abstract

483 mm (19“) Network Rack Dynamic Basic Series, 600, 800 mm width - 600, 800, 1000 mm depth

Features

- Safety class IP20

- Lateral metal struts front door with safety glass

- Lock system with pivot lever on front door

- Door stop is easy to change

- 120° door opening angle on the front door

- 1-point-locking-mechanism on the front door

- Rear wall and side panels are lockable and detachable

- incl. 4 pieces of leveling feet already pre-configured under the cabinet

- 483 mm (19“) profile rails mounted on the front- and rear side inside of the cabinet, galvanized

- 483 mm (19“) profile rails are adjustable in depth and with height unit marking

- Load capacity of 483 mm (19“) profile rails: 600 kg

- 2 pieces of mounted depth support bars for more stability from 26U (4 pieces from 32U)

- Base with punched out cable entry, covered with screwed metal plate

- Base with punched out cable entries with plastic covers left and right
(on cabinets from 800 mm width)

- Roof with punched out cable entries with plastic covers (3x on cabinets from 800 mm width;
1x on cabinets from 600 mm width)

- Roof is prepared for fan units (punched out entries)

- Several earthing points for rack components

- Incl. installation set (screws, cage nuts, washers)

- Rack is completely mounted

Product Overview

The Racks of the Dynamic Basic Series were designed for the user friendly installation of active- and passive
network components accompanied by a neat cable management. Each rack consists of up to 1.5 mm strong
steel sheet material which ensures a very good stability as a robust steel construction due to special plate
curving technique. The color is created by powder coating in grey (RAL 7035) and black (RAL 9005). For certain
conditions, where the set-up location is difficult to reach, the rack can be disassembled. Doors can be easily
detached and the door stop can be changed from right to left. Furthermore the roof is ready for the mounting

of an air ventilation unit. Each rack contains 2 pairs (4 pieces) of 483 mm (19”) profile rails inside which are

galvanized and with height unit marking (countable from both directions). They are variable in depth and
connected with additional depth support bars to realize extensive 483 mm (19”) equipment installations.
An important aspect for each installation is the cable management. The base of each rack is equipped with
a punched out cable entry covered with a metal plate, whereas the base of 800 mm width racks gets extended
with additional punched out cable entries with plastic covers left and right. These are also placed in the roof
(1x for 600 mm width cabinets, 3x for cabinets from 800 mm width. An extensive portfolio of accessories for
cable management, shelves, etc. will help to meet many requirements in daily use.

Conform due to standards

- ISO 9001:2008

- IEC 297-1, -2 (dimensions of mechanical structures of 483 mm (19“) series)

- EN 61587-1:2012 (mechanical carrier for electric systems)

- EN 60950-1:2006 (CE information technological systems - safety - part 1 - general requirements)

Product Video

View a product video of “DN-19 42U-8/8-D” on the official DIGITUS® Professional YouTube Channel
(when using this PDF on a computer, smartphone or tablet, please click on the YouTube logo below.
Alternatively you can also scan the QR code below):